Localizador GPS personal Micron Prime AT Plus

Características Micron Prime AT Plus:

3G
Caja negra
Posicionamiento Wi-Fi

Soportado en Wialon:

Gestión remota vía GPRS
LBS
Gestión remota vía SMS
Comunicación vía TCP
Comunicación por UDP

Puede ser apoyada por la petición:

Envío de datos por SMS

Para que el sistema de rastreo Wialon identifique los datos de Micron Prime AT Plus en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	Micron Prime AT Plus
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Micron Prime AT Plus para utilizarlos en Wialon Hosting :

Puerto del servidor:

21066

En el centro de servicio Wialon se utilizan 698 unidades Micron Prime AT Plus — es 3.36% de la cantidad total de dispositivos Personal conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
gps_acc	GPS accuracy
battery	The current volume of the backup battery	%
report_type	Type of report
inputN	The current logical status of the input port number N: 0 - is disable status 1 - is enable status
call_number	The phone number of the incoming call which initiates this report
power_percent	The current volume of the backup battery	%
iccid	The ICCID of the SIM card
temp	The temperature of the Device	°C
lightness	The lightness level
pwr_int	The voltage of the battery	V
csq_rssi	The GSM signal strength level. The range is 0-31, 99 for unknown
csq_ber	The quality of the GSM signal. The range is 0-7, 99 for unknown
dev_type	The type of device
soft_ver	The software version
hard_ver	The hardware version
is_pwr_ext	Whether the external power supply is connected. 0 - not connected 1 - connected
charging	Whether the backup battery is charging when the main power supply is connected. 0 - not charging 1 - charging
led_on	Indicate whether the LED’s are turned on
backup_baterry	The voltage of the battery	V
motion_state	The current motion state of device: 21 - The device attached vehicle is ignition on and motionless 22 - The device attached vehicle is ignition on and moving. 41 - The device is motionless without ignition on 42 - The device is moving without ignition on
motion_state_chg	The state of the device changed: 0 - from motion to rest; 1 - from rest to motion.
ign	Ignition state: 0 - off, 1 - on
light_state	The lightness state: 0: Report after the GPS fixing finished of timeout. 1: Lightness is greater than the bright threshold (Device from dark place to light place). 2: Lightness is less than the dark threshold (Device from light place to dark place).

Nombre del parámetro

Descripción

Unidades de medida

gps_acc

GPS accuracy

battery

The current volume of the backup battery

report_type

Type of report

inputN

The current logical status of the input port number N:
0 - is disable status
1 - is enable status

call_number

The phone number of the incoming call which initiates this report

power_percent

The current volume of the backup battery

iccid

The ICCID of the SIM card

temp

The temperature of the Device

°C

lightness

The lightness level

pwr_int

The voltage of the battery

csq_rssi

The GSM signal strength level. The range is 0-31, 99 for unknown

csq_ber

The quality of the GSM signal. The range is 0-7, 99 for unknown

dev_type

The type of device

soft_ver

The software version

hard_ver

The hardware version

is_pwr_ext

Whether the external power supply is connected.
0 - not connected
1 - connected

charging

Whether the backup battery is charging when the main power supply is connected.
0 - not charging
1 - charging

led_on

Indicate whether the LED’s are turned on

backup_baterry

The voltage of the battery

motion_state

The current motion state of device:
21 - The device attached vehicle is ignition on and motionless
22 - The device attached vehicle is ignition on and moving.
41 - The device is motionless without ignition on
42 - The device is moving without ignition on

motion_state_chg

The state of the device changed:
0 - from motion to rest;
1 - from rest to motion.

ign

Ignition state: 0 - off, 1 - on

light_state

The lightness state:
0: Report after the GPS fixing finished of timeout.
1: Lightness is greater than the bright threshold (Device from dark place to light place).
2: Lightness is less than the dark threshold (Device from light place to dark place).

Por favor, llene la solicitud para iniciar el trabajo con Wialon