Traceur GPS Vega NB-12 | Intégré à Wialon

Afin d'identifier le boîtier Vega NB-12 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	Vega NB-12
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Vega NB-12 pour les utiliser dans Wialon Hosting :

Port du serveur:

22577

0 unités Vega NB-12 connectées au le centre de données Wialon — Ça fait 0% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
fw_version	name and version of firmware
imsi	SIM card (SIM chip) identifier
iccid	SIM card (SIM chip) identifier
msg_number	message number
sq	signal quality from the station
earfcn	radio frequency channel number (absolute)
pcid	physical network address
rsrq	incoming signal quality (in centibels)
rssi	incoming signal strength indicator (in centibels)
snr	signal to noise ratio
reason	the reason for the formation of the data slice alarm1 - the packet is generated by an alarm at the input "COUNT1* (this is why event initiates a communication session) alarm2 - the packet is generated by an alarm at the "COUNT2" input (this is why event initiates a communication session) cnfg - the package is generated forcibly by command from the configurator hall sensor - the package is generated by the Hall sensor (based on this event communication session is initiated) button - the package is generated by pressing a button (by this event communication session is initiated) pulse limit - the packet was generated due to an alarm, since the number of pulses exceeds established thresholds ow limit - the packet was generated due to a onewire alarm, since the temperature exceeds established thresholds settings_change - confirmation of delivery of the package with settings (the "Send confirmation to the server about changing device settings" checkbox must be checked)
battery	battery charge percentage
temperature	device controller temperature
current	dependent current of the current loop interface
bat_drop	voltage value of the battery under control
states_magnetic	the presence of an external magnetic field, where “O” is absent, “1” exists
states_covr	flag for exceeding current loop interface current limits, specified in the settings ("0" - the limit is not exceeded, "1" - the limit is exceeded)
states_bde	flag of the presence of a critical battery voltage drop under load
pulse_N_cnt	number of pulses at pulse input N
pulse_N_h	more than the specified number of pulses per period (0 - no exceeding thresholds, 1 - exceeding recorded) at pulse input N
pulse_N_l	less than the specified number of pulses per period (0 - no exceeding thresholds, 1 - exceeding recorded) at pulse input N
ow_N_temperature	sensor temperature value on the N-Wire bus
ow_N_temperature_h	threshold exceeding flag ("0" - no exceeding, "1" - thresholds exceeded) on the N-Wire bus

Nom du paramètre

Description

Unités

fw_version

name and version of firmware

imsi

SIM card (SIM chip) identifier

iccid

SIM card (SIM chip) identifier

msg_number

message number

signal quality from the station

earfcn

radio frequency channel number (absolute)

pcid

physical network address

rsrq

incoming signal quality (in centibels)

rssi

incoming signal strength indicator (in centibels)

snr

signal to noise ratio

reason

the reason for the formation of the data slice

alarm1 - the packet is generated by an alarm at the input "COUNT1* (this is why event initiates a communication session)
alarm2 - the packet is generated by an alarm at the "COUNT2" input (this is why event initiates a communication session)
cnfg - the package is generated forcibly by command from the configurator hall
sensor - the package is generated by the Hall sensor (based on this event
communication session is initiated)
button - the package is generated by pressing a button (by this event
communication session is initiated)
pulse limit - the packet was generated due to an alarm, since the number of pulses exceeds established thresholds
ow limit - the packet was generated due to a onewire alarm, since the temperature exceeds established thresholds
settings_change - confirmation of delivery of the package with settings (the "Send confirmation to the server about changing device settings" checkbox must be checked)

battery

battery charge percentage

temperature

device controller temperature

current

dependent current of the current loop interface

bat_drop

voltage value of the battery under control

states_magnetic

the presence of an external magnetic field, where “O” is absent, “1” exists

states_covr

flag for exceeding current loop interface current limits, specified in the settings ("0" - the limit is not exceeded, "1" - the limit is exceeded)

states_bde

flag of the presence of a critical battery voltage drop under
load

pulse_N_cnt

number of pulses at pulse input N

pulse_N_h

more than the specified number of pulses per period (0 - no
exceeding thresholds, 1 - exceeding recorded) at pulse input N

pulse_N_l

less than the specified number of pulses per period (0 - no
exceeding thresholds, 1 - exceeding recorded) at pulse input N

ow_N_temperature

sensor temperature value on the N-Wire bus

ow_N_temperature_h

threshold exceeding flag ("0" - no exceeding, "1" - thresholds exceeded) on the N-Wire bus

Remplissez le formulaire pour commencer à travailler avec Wialon

Produits

Produits de niche pour des tâches spécifiques

Vega NB-12

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon