Cantrack TK100

Nombre des unités

41
En ligne
70
Nombre total
Caractéristiques Cantrack TK100:
  • Boîte à mémoire
  • Compteur kilométrage intégré
Compatible avec Wialon:
  • Capteurs numériques
  • Gestion à distance via SMS
  • Bouton d'alarme
  • Modification du paramètre "speed"
  • Communication via TCP

Afin d'identifier le boîtier Cantrack TK100 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS: Cantrack TK100
ID unique: imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Cantrack TK100 pour les utiliser dans Wialon Hosting :

Port du serveur: 21584

70 unités Cantrack TK100 connectées au le centre de données Wialon — Ça fait 0% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
gps_time_status GPS is Real Time or Reupload
visible_sats Visible satellites
iccid iccid number
server_flag It refers to the data to send (by the coding format);
alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

mcc Mobile Country Code
temp Fuel temperature
sensor_percent Fuel level in percent
imei imei number
imsi imsi number
status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

cell_id Cell Tower ID
sats Number of satellites
pwr_ext Voltage level
door Door status
status_trig_time1 Report status: Trigger time
inputs Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
gsm_signal_csq GSM Signal CSQ
sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

mnc Mobile Network Code
boot_reason Boot Reason
alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

acc ACC Status. ACC low: 0, ACC high: 1
pwr_int Battery voltage(mV)
mileage Mileage statistics
odometer Odometer
gsm GSM signal strength degree
encoding

0X01: UTF-8
0x02: ASCII;

rssi LBS Main Cell Tower, rssi
content the command response content
battery_vol Battery Voltage
sequence_num Sequence Number
time Time stamp
voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

lac Location Area Code
battery Fuel level battery value
hdop HDOP
status_reg_content Report status: Trigger content
  • Size:97*14*51mm
  • Real-time tracking
  • Two-way calling by connecting car horn wire
  • SOS alarm
  • Geo-fence /Over speed alarm
  • Remote voice monitoring (external microphone)
  • ACC Anti-theft alarm
  • Power failure alarm with internal battery
  • Disable fuel or electricity

Plus de boîtiers GPS de ce fabricant

Développez votre activité avec nous