Traceur GPS VIRLOC VL08 | Intégré à Wialon

Caractéristiques VIRLOC VL08:

4G/LTE
Boîte à mémoire
BLE enabled
Compatibilité avec GLONASS

Afin d'identifier le boîtier VIRLOC VL08 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	VIRLOC VL08
ID unique:	custom

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration VIRLOC VL08 pour les utiliser dans Wialon Hosting :

Port du serveur:

22283

166 unités VIRLOC VL08 connectées au le centre de données Wialon — Ça fait 0.01% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
seq_num	Sequential message number
event_number	Number of the event that triggered the report Event number: Description 100: Ignition turned on 101: Ignition turned off 102: Periodic tracking with ignition on 103: Periodic tracking with ignition off 104: Event start: Overspeed 105: Event end: Overspeed 106: Event start: Overspeed under rain 107: Event end: Overspeed under rain 108: End of Trip 109: Event start: RPM exceeded 110: Event end: RPM exceeded 111: Event start: Idling (engine on without motion) 112: Event end: Idling (engine on without motion) 113: Event start: Excessive clutch use 114: Event end: Excessive clutch use 115: Event start: Motion while in neutral gear 116: Event end: Motion while in neutral gear 117: Login: Authorized driver 118: Login: Unauthorized driver 119: High temperature 120: Harsh acceleration 121: Harsh braking 122: Harsh cornering 127: Main power disconnected 128: Main power connected/reconnected 129: Backup battey in low voltage level 130: Backup battey voltage level normalized 131: Entering on sleep mode 132: Exiting sleep mode 150: Ignition turned on 151: Ignition turned off 152: Periodic tracking with ignition on 153: Periodic tracking with ignition off 154: Connected/reconnected to the server
protocol_ident	Identifier of the protocol
serial_number	VIRLOC’s serial number
fw_version	VIRLOC’s firmware version
board_version	VIRLOC’s board version
can_version	Script version [V1.2_CAN \| V1.2_PUL] In the CAN version, telemetry data are read from the vehicle’s CANBUS (with J1939 FMS standard protocol) In the PUL version, telemetry data are read from pulse inputs
serial_peripheral	Serial peripheral selected for driver identification [KNOV8 \| KNOV9 \| SGTECL \| SGRFID \| IBUTTON \| -] KNOV8 = Knov keyboard or RFID reader in mode 8; KNOV9 = Knov keyboard or reader in mode 9; SGTECL = SG Bras keyboard; SGRFID = SG Bras RFID reader; IBUTTON = iButton; - = Disabled;
overspeed_flag	Overspeed under rain [0 = disabled \| 1 = enabled] Maximum speed in the overspeed event (updated with the events 105 and 107) [km/h]
trip_timer	Trip timer source [0 = RPM \| 1 = Ignition]
drv_behavior	Driver behavior event source [0 = speed variation\| 1 = G-sensor]
sim_iccid	SimCard’s ICCID
last_valid_pos	Seconds since last valid position	Seconds
pwr_int	Backup battery voltage	Voltage
pwr_ext	Main Power voltage (vehicle’s battery)	Voltage
rpm_flag	Maximum rotation in the RPM exceeded event (updated with the event 110) [RPM]
odometer	Vehicle’s odometer	meters
engine_rpm	Engine rotation	RPM
engine_tmp	Engine temperature	°C
engine_oil_press	Engine oil pressure	KPa
fuel_level	Fuel level	%
connection_status	Connection status [1 = online \| 0 = offline]
network_band	Network band [4G:0 = connected in GSM service \| 4G:1 = connected in LTE Cat-M1 service]
driver_id	Driver’s ID [from RFID or iButton].
rpm_tm_#	Time of RPM within range 1-5	Seconds
engine_braking_tm	Time with engine braking activated	Seconds
trip_tm	Trip time	Minutes
distance_traveled	Distance traveled	Meters
fuel_consumed	Fuel consumed	mL
accel_pos	Accelerator pedal position	%
operation_total_tm	Vehicle’s total time in operation	Minutes
report	Name of the report

Nom du paramètre

Description

Unités

seq_num

Sequential message number

event_number

Number of the event that triggered the report

Event number: Description

100: Ignition turned on
101: Ignition turned off
102: Periodic tracking with ignition on
103: Periodic tracking with ignition off
104: Event start: Overspeed
105: Event end: Overspeed
106: Event start: Overspeed under rain
107: Event end: Overspeed under rain
108: End of Trip
109: Event start: RPM exceeded
110: Event end: RPM exceeded
111: Event start: Idling (engine on without motion)
112: Event end: Idling (engine on without motion)
113: Event start: Excessive clutch use
114: Event end: Excessive clutch use
115: Event start: Motion while in neutral gear
116: Event end: Motion while in neutral gear
117: Login: Authorized driver
118: Login: Unauthorized driver
119: High temperature
120: Harsh acceleration
121: Harsh braking
122: Harsh cornering
127: Main power disconnected
128: Main power connected/reconnected
129: Backup battey in low voltage level
130: Backup battey voltage level normalized
131: Entering on sleep mode 132: Exiting sleep mode
150: Ignition turned on
151: Ignition turned off
152: Periodic tracking with ignition on
153: Periodic tracking with ignition off
154: Connected/reconnected to the server

protocol_ident

Identifier of the protocol

serial_number

VIRLOC’s serial number

fw_version

VIRLOC’s firmware version

board_version

VIRLOC’s board version

can_version

Script version [V1.2_CAN | V1.2_PUL]

In the CAN version, telemetry data are read from the vehicle’s CANBUS (with J1939 FMS standard protocol)
In the PUL version, telemetry data are read from pulse inputs

serial_peripheral

KNOV8 = Knov keyboard or RFID reader in mode 8;
KNOV9 = Knov keyboard or reader in mode 9;
SGTECL = SG Bras keyboard;
SGRFID = SG Bras RFID reader;
IBUTTON = iButton;
- = Disabled;

overspeed_flag

Overspeed under rain [0 = disabled | 1 = enabled]

Maximum speed in the overspeed event (updated with the events 105 and 107) [km/h]

trip_timer

Trip timer source [0 = RPM | 1 = Ignition]

drv_behavior

Driver behavior event source [0 = speed variation| 1 = G-sensor]

sim_iccid

SimCard’s ICCID

last_valid_pos

Seconds since last valid position

Seconds

pwr_int

Backup battery voltage

Voltage

pwr_ext

Main Power voltage (vehicle’s battery)

Voltage

rpm_flag

Maximum rotation in the RPM exceeded event (updated with the event 110) [RPM]

odometer

Vehicle’s odometer

meters

engine_rpm

Engine rotation

RPM

engine_tmp

Engine temperature

°C

engine_oil_press

Engine oil pressure

KPa

fuel_level

Fuel level

connection_status

Connection status [1 = online | 0 = offline]

network_band

Network band [4G:0 = connected in GSM service | 4G:1 = connected in LTE Cat-M1 service]

driver_id

Driver’s ID [from RFID or iButton].

rpm_tm_#

Time of RPM within range 1-5

Seconds

engine_braking_tm

Time with engine braking activated

Seconds

trip_tm

Trip time

Minutes

distance_traveled

Distance traveled

Meters

fuel_consumed

Fuel consumed

accel_pos

Accelerator pedal position

operation_total_tm

Vehicle’s total time in operation

Minutes

report

Name of the report

Remplissez le formulaire pour commencer à travailler avec Wialon

Produits

Produits de niche pour des tâches spécifiques

VIRLOC VL08

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon