GPS трекер для мониторинга имущества LL706

Особенности LL706:

Наличие черного ящика

Поддержано в Wialon:

Связь через TCP
Связь через UDP

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от LL706 в диалоге настроек объекта, укажите следующие данные :

Тип устройства:	LL706
Уникальный ID:	imei

Укажите следующие параметры в конфигурационной программе или в конфигурации LL706 для использования его в Wialon Hosting :

Порт сервера:

22800

Всего в серверном центре Wialon используется 1 объектов LL706 — это составляет 0% от общего количества устройств в категории «Стационарные устройства».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
iccid	iccid number
gsm_signal_csq	GSM Signal CSQ
pwr_int	Battery voltage(mV)
pwr_ext	Voltage level
lac	Location Area Code
sensor_percent	Fuel level in percent
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
imsi	imsi number
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
rssi	LBS Main Cell Tower, rssi
hdop	HDOP
mileage	Mileage statistics
battery_vol	Battery Voltage
gps_time_status	GPS is Real Time or Reupload
door	Door status
battery	Fuel level battery value
odometer	Odometer
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
cell_id	Cell Tower ID
sats	Number of satellites
time	Time stamp
mnc	Mobile Network Code
sequence_num	Sequence Number
gsm	GSM signal strength degree
encoding	0X01: UTF-8 0x02: ASCII;
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
visible_sats	Visible satellites
imei	imei number
boot_reason	Boot Reason
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
content	the command response content
acc	ACC Status. ACC low: 0, ACC high: 1
temp	Fuel temperature
status_reg_content	Report status: Trigger content
mcc	Mobile Country Code
status_trig_time1	Report status: Trigger time
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
server_flag	It refers to the data to send (by the coding format);

Имя параметра

Описание

Единицы измерения

iccid

iccid number

gsm_signal_csq

GSM Signal CSQ

pwr_int

Battery voltage(mV)

pwr_ext

Voltage level

lac

Location Area Code

sensor_percent

Fuel level in percent

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

imsi

imsi number

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

rssi

LBS Main Cell Tower, rssi

hdop

HDOP

mileage

Mileage statistics

battery_vol

Battery Voltage

gps_time_status

GPS is Real Time or Reupload

door

Door status

battery

Fuel level battery value

odometer

Odometer

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

cell_id

Cell Tower ID

sats

Number of satellites

time

Time stamp

mnc

Mobile Network Code

sequence_num

Sequence Number

gsm

GSM signal strength degree

encoding

0X01: UTF-8
0x02: ASCII;

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

visible_sats

Visible satellites

imei

imei number

boot_reason

Boot Reason

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

content

the command response content

acc

ACC Status. ACC low: 0, ACC high: 1

temp

Fuel temperature

status_reg_content

Report status: Trigger content

mcc

Mobile Country Code

status_trig_time1

Report status: Trigger time

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

server_flag

It refers to the data to send (by the coding format);

Wialon: комплексная платформа для разнообразных задач

LL706

Другие устройства производителя

Развивайте бизнес вместе с нами

Станьте партнером Wialon

Выберите поставщика Wialon