GPS трекер MettaX MV202 | Интегрирован с Wialon

Особенности MettaX MV202:

4G/LTE
Отправка данных на несколько серверов

Поддержано в Wialon:

Управляющие команды по GPRS
Связь через TCP

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от MettaX MV202 в диалоге настроек объекта, укажите следующие данные :

Тип устройства:	MettaX MV202
Уникальный ID:	Последние 10 цифр IMEI

Укажите следующие параметры в конфигурационной программе или в конфигурации MettaX MV202 для использования его в Wialon Hosting :

Порт сервера:

22618

Всего в серверном центре Wialon используется 1 объектов MettaX MV202 — это составляет 0% от общего количества устройств в категории «Автомобильные контролеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
param_id_#	Parameter value
event_#	Event
alarm_flag	Alarm flag (Bits1-32): Bit1: 1: Emergency alarm, trigger after triggering alarm switch Bit2: 1: Over speed alarm Bit3: 1: Driving alarm malfunction Bit4: 1: Risk warning Bit5: 1: GNSS module malfunction Bit6: 1: GNSS antenna was notconnected or cut Bit7: 1: GNSS antenna short circuited Bit8: 1: The terminal main power undervoltage Bit9: 1: The terminal main power is turned off Bit10: 1: Terminal LCD or displaymalfunction Bit11: 1: TTS module malfunction Bit12: 1: Camera malfunction Bit13: 1: Road transportcertificate IC card module malfunction Bit14: 1: Over speed warning Bit15: 1: Fatigue driving warning Bit16-Bit18: Reserve Bit19: 1: The accumulated overspeed driving time of the day Bit20: 1: Timeout parking Bit21: 1: Enter and exit the area Bit22: 1: Enter and exit the route Bit23: 1: The driving time of theroute is not enough/too long Bit24: 1: Off track alarm Bit25: 1: Vehicle VSS malfunction Bit26: 1: Abnormal fuel capacityof vehicle Bit27: 1: The vehicle is stolen(through vehicle burglar alarm) Bit28: 1: Illegal ignition of vehicle Bit29: 1: Illegal displacement ofvehicle Bit30: 1: Collision warning Bit31: 1: Rollover warning Bit32: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)
state_flag	Status (Bits 1-32): Bit1: 0: ACC off; 1: ACC on Bit2: 0: Not positioning; 1: Positioning Bit3: 0: North latitude; 1: South latitude Bit4: 0: East longitude; 1: West longitude Bit5: 0: Running status; 1: Stop running status Bit6: 0: Latitude and longitude are not encrypted by secret plug-ins; 1: Latitude and longitude are encrypted by secret plug-ins Bit7-Bit8: Reserve Bit9-Bit10: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load (It can be used for empty/heavy passenger car and empty/full load status of the truck, manual input or sensor acquisition) Bit11: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect Bit12: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect Bit13: 0: Vehicle door unlocked; 1: Vehicle door locked Bit14: 0: Door 1 close; 1: Door 1 open (front door) Bit15: 0: Door 2 close; 1: Door 2 open (middle door) Bit16: 0: Door 3 close; 1: Door 3 open (back door) Bit17: 0: Door 4 close; 1: Door 4 open (door of driver’s seat) Bit18: 0: Door 5 close; 1: Door 5 open (user-defined) Bit19: 0: No GPS positioning; 1: GPS positioning Bit20: 0: No Beidou positioning; 1: Beidou positioning Bit21: 0: No GLONASS positioning; 1: GLONASS positioning Bit22: 0: No Galileo positioning; 1: Galileo positioning Bit23-32: Reserve
odometer	Odometer
fuel_volume	Fuel volume
speed_drvng_rec	Speed driving rec
alarm_event_id	Alarm event ID
overspeed_alarm	Overspeed alarm
position_type	Position type
section_id	Section ID
route_alarm	Route alarm
direction	Direction
driving_time_alarm	Driving time alarm
driving_time	Driving time
driving_results	Driving results
veh_signal_status	Veh. signal status
user_msg	User mesage
veh_stat	Vehicle status, the same as state_flag
info_id	Additional information ID 0x64 - driving assist warning information 0x65 - driver behavior monitoring function warning information 0x70 - violent driving warning information 0x14 - Video-related alarm 0x15 - Video signal loss alarm 0x16 - Video signal blockage alarm 0x17 - Memory fault alarm 0x18 -Driving behavior alarm
alm_time	Alarm time threshold	sec
alm_thre1	Warning threshold 1 When alm_type is 0x01~0x03, this bit is warning gravity acceleration threshold in 1/100g; when alm_type is 0x04~0x07, this bit is warning speed threshold in km/h.
alm_thre2	Warning threshold 2 This bit is reserved when alm_type is 0x01~0x03; when alm_type is 0x04~0x07, this bit is warning engine speed threshold in RPM.
workstate	Workstate, 0x01: normal work 0x02: standby mode 0x03: Upgrade maintenance 0x04: Device is abnormal 0x10: Disconnect
alarm_status	Alarm status, bits(1-32) Bitwise setting: 0 means no, 1 means yes bit1: cameraabnormal bit2: Main memory exception bit3: Auxiliary memory exception bit4: Infrared fill light is abnormal bit5: abnormal speaker bit6: Abnormal battery bit7~bit10:reserved bit11: Communication module error bit12: The positioning module is abnormal bit13~bit32:reserved
alm_lvl	Warning level: 0x01: Level 1 warning 0x02: Level 2 warning
alm_id	According to the warning sequence, starting from 0 and accumulates circularly, without distinguishing warning types.
sign_stat	Sign status. 0x00: Not available 0x01: Start sign 0x02: End sign This field is only applicable to warnings or events with start and end sign types.
dev_type	Deviation type: 0x01: Left deviation 0x02: Right deviation Only valid when warning type is 0x02, fill in 0x00 when unavailable.

Имя параметра

Описание

Единицы измерения

param_id_#

Parameter value

event_#

Event

alarm_flag

Alarm flag (Bits1-32):

Bit1: 1: Emergency alarm, trigger after triggering alarm switch

Bit2: 1: Over speed alarm

Bit3: 1: Driving alarm malfunction

Bit4: 1: Risk warning

Bit5: 1: GNSS module malfunction

Bit6: 1: GNSS antenna was notconnected or cut

Bit7: 1: GNSS antenna short circuited

Bit8: 1: The terminal main power undervoltage

Bit9: 1: The terminal main power is turned off

Bit10: 1: Terminal LCD or displaymalfunction

Bit11: 1: TTS module malfunction

Bit12: 1: Camera malfunction

Bit13: 1: Road transportcertificate IC card module malfunction

Bit14: 1: Over speed warning

Bit15: 1: Fatigue driving warning

Bit16-Bit18: Reserve

Bit19: 1: The accumulated overspeed driving time of the day

Bit20: 1: Timeout parking

Bit21: 1: Enter and exit the area

Bit22: 1: Enter and exit the route

Bit23: 1: The driving time of theroute is not enough/too long

Bit24: 1: Off track alarm

Bit25: 1: Vehicle VSS malfunction

Bit26: 1: Abnormal fuel capacityof vehicle

Bit27: 1: The vehicle is stolen(through vehicle burglar alarm)

Bit28: 1: Illegal ignition of vehicle

Bit29: 1: Illegal displacement ofvehicle

Bit30: 1: Collision warning

Bit31: 1: Rollover warning

Bit32: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)

state_flag

Status (Bits 1-32):

Bit1: 0: ACC off; 1: ACC on

Bit2: 0: Not positioning; 1: Positioning

Bit3: 0: North latitude; 1: South latitude

Bit4: 0: East longitude; 1: West longitude

Bit5: 0: Running status; 1: Stop running status

Bit6: 0: Latitude and longitude are not encrypted by secret plug-ins; 1:

Latitude and longitude are encrypted by secret plug-ins

Bit7-Bit8: Reserve

Bit9-Bit10: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load

(It can be used for empty/heavy passenger car and empty/full load

status of the truck, manual input or sensor acquisition)

Bit11: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect

Bit12: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect

Bit13: 0: Vehicle door unlocked; 1: Vehicle door locked

Bit14: 0: Door 1 close; 1: Door 1 open (front door)

Bit15: 0: Door 2 close; 1: Door 2 open (middle door)

Bit16: 0: Door 3 close; 1: Door 3 open (back door)

Bit17: 0: Door 4 close; 1: Door 4 open (door of driver’s seat)

Bit18: 0: Door 5 close; 1: Door 5 open (user-defined)

Bit19: 0: No GPS positioning; 1: GPS positioning

Bit20: 0: No Beidou positioning; 1: Beidou positioning

Bit21: 0: No GLONASS positioning; 1: GLONASS positioning

Bit22: 0: No Galileo positioning; 1: Galileo positioning

Bit23-32: Reserve

odometer

Odometer

fuel_volume

Fuel volume

speed_drvng_rec

Speed driving rec

alarm_event_id

Alarm event ID

overspeed_alarm

Overspeed alarm

position_type

Position type

section_id

Section ID

route_alarm

Route alarm

direction

Direction

driving_time_alarm

Driving time alarm

driving_time

Driving time

driving_results

Driving results

veh_signal_status

Veh. signal status

user_msg

User mesage

veh_stat

Vehicle status, the same as state_flag

info_id

Additional information ID

0x64 - driving assist warning information
0x65 - driver behavior monitoring function warning information
0x70 - violent driving warning information
0x14 - Video-related alarm
0x15 - Video signal loss alarm
0x16 - Video signal blockage alarm
0x17 - Memory fault alarm
0x18 -Driving behavior alarm

alm_time

Alarm time threshold

sec

alm_thre1

Warning threshold 1

When alm_type is 0x01~0x03, this bit is warning gravity acceleration threshold in 1/100g; when alm_type is 0x04~0x07, this bit is warning speed threshold in km/h.

alm_thre2

Warning threshold 2

This bit is reserved when alm_type is 0x01~0x03; when alm_type is 0x04~0x07, this bit is warning engine speed threshold in RPM.

workstate

Workstate,

0x01: normal work

0x02: standby mode

0x03: Upgrade maintenance

0x04: Device is abnormal

0x10: Disconnect

alarm_status

Alarm status, bits(1-32)

Bitwise setting: 0 means no, 1 means yes

bit1: cameraabnormal

bit2: Main memory exception

bit3: Auxiliary memory exception

bit4: Infrared fill light is abnormal

bit5: abnormal speaker

bit6: Abnormal battery

bit7~bit10:reserved

bit11: Communication module error

bit12: The positioning module is abnormal

bit13~bit32:reserved

alm_lvl

Warning level:

0x01: Level 1 warning
0x02: Level 2 warning

alm_id

According to the warning sequence, starting from 0 and accumulates circularly, without distinguishing warning types.

sign_stat

Sign status.

0x00: Not available
0x01: Start sign
0x02: End sign

This field is only applicable to warnings or events with start and end sign types.

dev_type

Deviation type:

0x01: Left deviation
0x02: Right deviation
Only valid when warning type is 0x02, fill in 0x00 when unavailable.

Заполните заявку для начала работы с Wialon

Продукты

Нишевые продукты для решения точечных задач

MettaX MV202

Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Станьте партнером

Закажите Wialon в вашем регионе

Заполните заявку для начала работы с Wialon