Localizador GPS de activos PCL LT500C

Características PCL LT500C:

4G/LTE
Caja negra

Soportado en Wialon:

Modificación del parámetro "speed"
Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de PCL LT500C en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	PCL LT500C
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración PCL LT500C para utilizarlos en Wialon Hosting :

Puerto del servidor:

22562

En el centro de servicio Wialon se utilizan 4 unidades PCL LT500C — es 0% de la cantidad total de dispositivos Rastreador de activos conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
lac	Location Area Code
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
mcc	Mobile Country Code
hdop	HDOP
imsi	imsi number
content	the command response content
sats	Number of satellites
sequence_num	Sequence Number
pwr_int	Battery voltage(mV)
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
visible_sats	Visible satellites
sensor_percent	Fuel level in percent
imei	imei number
server_flag	It refers to the data to send (by the coding format);
status_reg_content	Report status: Trigger content
odometer	Odometer
boot_reason	Boot Reason
temp	Fuel temperature
pwr_ext	Voltage level
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
gsm	GSM signal strength degree
battery_vol	Battery Voltage
iccid	iccid number
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
gps_time_status	GPS is Real Time or Reupload
encoding	0X01: UTF-8 0x02: ASCII;
mileage	Mileage statistics
gsm_signal_csq	GSM Signal CSQ
mnc	Mobile Network Code
battery	Fuel level battery value
cell_id	Cell Tower ID
rssi	LBS Main Cell Tower, rssi
status_trig_time1	Report status: Trigger time
acc	ACC Status. ACC low: 0, ACC high: 1

Nombre del parámetro

Descripción

Unidades de medida

lac

Location Area Code

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

mcc

Mobile Country Code

hdop

HDOP

imsi

imsi number

content

the command response content

sats

Number of satellites

sequence_num

Sequence Number

pwr_int

Battery voltage(mV)

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

visible_sats

Visible satellites

sensor_percent

Fuel level in percent

imei

imei number

server_flag

It refers to the data to send (by the coding format);

status_reg_content

Report status: Trigger content

odometer

Odometer

boot_reason

Boot Reason

temp

Fuel temperature

pwr_ext

Voltage level

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

gsm

GSM signal strength degree

battery_vol

Battery Voltage

iccid

iccid number

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

gps_time_status

GPS is Real Time or Reupload

encoding

0X01: UTF-8
0x02: ASCII;

mileage

Mileage statistics

gsm_signal_csq

GSM Signal CSQ

mnc

Mobile Network Code

battery

Fuel level battery value

cell_id

Cell Tower ID

rssi

LBS Main Cell Tower, rssi

status_trig_time1

Report status: Trigger time

acc

ACC Status. ACC low: 0, ACC high: 1

Wialon: una plataforma para todas sus necesidades

PCL LT500C

Otros dispositivos del fabricante

Haga crecer su negocio con nosotros

Conviértase en socio de Wialon

Busque a un proveedor local de Wialon