| counterX |
Counter on a digital input, X - number of inputs |
|
| adcX |
Analog sensor, X - number of sensor
|
|
| temp_ext |
External temperature sensor |
|
| fsdata |
Fuel sensor data |
|
| accel_stop |
Accelerometer status, 0 - movement 1 - Parking |
|
| pwr_ext |
Value of external voltage (ARNAVI 4 / ARNAVI 5 / INTEGRAL) Battery voltage (BEACON) |
Volt |
| pwr_int |
Value of internal battery voltage (ARNAVI 4 / ARNAVI 5 / INTEGRAL) Voltage of CPU (BEACON) |
Volt |
| ant_state |
GPS antenna status |
|
| ign |
Ignition status |
|
| acc_x |
X-axis acceleration |
M/S2
|
| acc_y |
Y-axis acceleration |
M/S2
|
| acc_z |
Z-axis acceleration |
M/S2
|
| temp_int |
Internal temperature sensor |
|
| uptime |
Time since last start/reboot |
|
| reboot |
Reason of the last reboot |
|
| iccid |
ICCID SIM card |
|
| imei |
IMEI GSM-module |
|
| pin |
Physical input value (Arnavi 5) |
bitwise parameter control |
| v_in |
Virtual input value (Arnavi 5) |
|
| hdop |
Horizontal Dilution of Precision (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| cell_id |
Cell code GSM (ARNAVI 4 / ARNAVI 5 / INTEGRAL / BEACON) |
|
| lac |
(ARNAVI 4 / ARNAVI 5 / INTEGRAL / BEACON) |
|
| mnc |
(ARNAVI 4 / ARNAVI 5 / INTEGRAL / BEACON) |
|
| mcc |
(ARNAVI 4 / ARNAVI 5 / INTEGRAL / BEACON) |
|
| gsm |
GSM signal level
From 1 to 31
(99 – no GSM signal)
(ARNAVI 4 / ARNAVI 5 / INTEGRAL / BEACON)
|
|
| gsm_st |
GSM chip state
Duplicate of lightings (0 – not enabled, 1 – started, 2 – GPRS test, 3 – Connected to server (ARNAVI 4 / INTEGRAL))
Duplicate of lightings (0 – not enabled, 1 – enabled, 2 – AT Ok, network search, 3 – GPRS test, 4 – GPRS OK (ARNAVI 5))
|
|
| nav_st |
Navigation chip state (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| mw |
Move state (ARNAVI 4 / ARNAVI 5 / INTEGRAL) 0 – not move, 1 – move |
|
| sim_t |
Number of sim card, uses now for connection (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| sim_in |
SIM inserted (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| st0 |
Opencase sensor (ARNAVI 4 / INTEGRAL) Optional |
|
| st1 |
1-wire discrete state (ARNAVI 4 / INTEGRAL) |
|
| st2 |
Ignition (ARNAVI 4 / INTEGRAL) Read from IN2 (or from CAN) |
|
| freq_x |
Frequency sensor, X - number of input. (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| info_messages |
Special value (ARNAVI 4 / ARNAVI 5 / INTEGRAL)
Rule for create new package
Time for next wakeup (unix-time) (BEACON)
|
|
| lls1_val |
RS485 value (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| lls1_temp |
RS485 temperature (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| I/O |
Bitwise parameter (ARNAVI 4 / INTEGRAL)
in1, in2, in3, in4, in5, in6
out1, out2, out3, out4
|
bitwise control |
| can_eng_full_time |
CAN engine hours (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| can_full_mileage |
CAN odometer (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| can_full_fuel_cons |
CAN fuel const (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| can_fuel_level |
CAN fuel level (%)(ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
% |
| can_rpm |
CAN RPM (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| can_eng_temp |
CAN temp of engine (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| can_speed |
CAN speed (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| can_axle_load1 |
CAN load for axle 1 (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| sim1_st |
State of sim 1 (ARNAVI 5) 0 – no present, 2 – search network, 1 – home network, 5 - roaming |
|
| sim2_st |
State of sim 2 (ARNAVI 5) 0 – no present, 2 – search network, 1 – home network, 5 - roaming |
|
| s1_st |
State of server 1 (ARNAVI 5) 0 – not present in settings, 1 - connecting, 2 - connected |
|
| s2_st |
State of server 2 (ARNAVI 5) 0 – not present in settings, 1 - connecting, 2 - connected |
|
| os |
Opencase sensor state (ARNAVI 5) Optional |
|
| msd |
State of MicroSD (ARNAVI 5) 1 – inserted, 0 – not inserted |
|
| bt |
Bluetooth (ARNAVI 5) 1 – enable, 0 - disable |
|
| gps_full_mileage |
Odometer from GNSS (ARNAVI 4 / ARNAVI 5 / INTEGRAL) |
|
| hs |
Time of last settings change (BEACON) |
|
| balance_sim1 |
Balance of sim1 |
|
| balance_sim2 |
Balance of sim2 |
|
