| msg_type |
Message type
|
|
| device_id |
Device ID
|
|
| cmd_key |
Command key
|
|
| protocol_ver |
The version of the protocol
|
|
| sub_cmd |
Subcommand type
|
|
| result |
Result
|
|
| event_type |
The type of event trigger message - 0 - Terminal Power Event
- 1 - Regular Report Event
- 2 - Moving Event
- 3 - Battery Alarm Event
- 4 - Free Fall Alarm Event
- 5 - Tilt Alarm Event
- 6 - Flight Mode Event
- 7 - Crash Alarm Event
- 8 - Light Alarm Event
- 9 - Built-in Temperature Alarm Event
- 10 - Humidity Alarm Event
- 11 - Upgrade Firmware Event
- 12 - External Temperature Alarm Event
|
|
| event_state |
The state of the event
|
|
| frame_count |
The frames count
|
|
| frame_id |
The ID of the current frame
|
|
| network_type |
Current network type
|
|
| pwr_int |
Internal battery voltage
|
V |
| battery |
Internal battery charge level (0-100%)
|
% |
| neighbor_cell_lac |
Cell location area code
|
|
| neighbor_cell_id |
Cell ID
|
|
| neighbor_cell_csq |
The signal strength level
|
|
| build_in_temp |
The current build-in temperature value
|
℃ |
| build_in_hum |
The current build-in humidity value
|
% |
| light_lux |
The current light lux value
|
lux |
| acc_x |
Acceleration value, X axis
|
|
| acc_y |
Acceleration value, Y axis
|
|
| acc_z |
Acceleration value, Z axis
|
|
| rtc_tm |
RTC time
|
|
| 1wire_temp_hash |
Temperature from 1wire sensor (hash - the hash of the sensor ID)
|
|
| upgrade_code |
The code of the upgrade. - 0: The device prepares download the package.
- 1: The device starts to download the package.
- 2: The device finishes downloading the package successfully.
- 3: The device fails to download the package.
- 4: Start upgrade process is refused because the battery is low.
- 11: The device starts to upgrade the firmware.
- 12: The device finishes upgrading the firmware successfully.
- 13: The device fails to upgrade the firmware.
- 14: The upgrade process does not start because the battery is low.
|
|
| generated_tm |
The local time to send the message.
|
|
| main_pwr_vcc |
Main Power VCC
|
V |
| a_in_num |
Analog input number
|
|
| a_in_volt_N |
Analog Input Voltage (N - analog input number)
|
|
| ing_mot_status |
Ignition & Motion State
|
|
| d_in_state |
Digital Input State
|
|
| d_out_state |
Digital Output State
|
|
| mileage |
Current Mileage
|
|
| total_mileage |
Total Mileage
|
|
| gps_sats_num |
GPS Satellite number
|
|
| beidou_sats_num |
BEIDOU Satellite number
|
|
| galileo_sats_num |
GALILEO Satellite number
|
|
| glonass_sats_num |
GLONASS Satellite number
|
|
| all_geo_status |
All GEO Status
|
|
| 1wire_sens_id_N |
1wire Sensor ID (N - sensor number)
|
|
| 1wire_temp_N |
1wire Temperature (N - sensor number)
|
℃ |
| 1wire_hum_N |
1wire Humidity (N - sensor number)
|
% |
| curr_hour_m_cnt |
Current Hour Meter Count
|
|
| total_hour_m_cnt |
Total Hour Meter Count
|
|
| asc_x_forward |
ASC X Forward
|
|
| asc_y_forward |
ASC Y Forward
|
|
| asc_z_forward |
ASC Z Forward
|
|
| asc_x_horizon |
ASC X Horizontal
|
|
| asc_y_horizon |
ASC Y Horizontal
|
|
| asc_z_horizon |
ASC Z Horizontal
|
|
| asc_x_gravity |
ASC X Gravity
|
|
| asc_y_gravity |
ASC Y Gravity
|
|
| asc_z_gravity |
ASC Z Gravity
|
|
| crash_cnt |
Crash Counter
|
|
| asc_status |
ASC Status
|
|
| crash_x |
Crash X Value
|
|
| crash_y |
Crash Y Value
|
|
| crash_z |
Crash Z Value
|
|
| gnss_num |
The number of GNSS points in current message
|
|
| fix_type |
Fix Type
|
|
| hdop |
Horizontal Dilution of Precision
|
|
| can_vin |
VIN
|
|
| can_ign_key |
Ignition Key
|
|
| can_total_distance |
Total Distance
|
|
| can_total_dist_imp |
Total Distance Impulses
|
|
| can_total_fuel |
Total Fuel Used
|
|
| can_speed |
Vehicle Speed
|
|
| can_eng_rpm |
Engine RPM
|
|
| can_eng_cool_temp |
Engine Coolant Temperature
|
|
| can_fuel_cons_l_100km |
Fuel Consumption (L/100km)
|
|
| can_fuel_cons_l_h |
Fuel Consumption (L/H)
|
|
| can_fuel_lvl_lit |
Fuel Level Liter
|
|
| can_fuel_lvl_per |
Fuel Level Percent
|
% |
| can_range |
Range
|
|
| can_acc_pedal_press |
Accelerator Pedal Pressure
|
|
| can_total_eng_hours |
Total Engine Hours
|
|
| can_total_driv_time |
Total Driving Time
|
|
| can_total_eng_idle |
Total Engine Idle Time
|
|
| can_total_idle_fuel |
Total Idle Fuel Used
|
|
| can_axle_weight_1 |
Axle Weight 1st
|
|
| can_axle_weight_2 |
Axle Weight 2nd
|
|
| can_axle_weight_3 |
Axle Weight 3rd
|
|
| can_axle_weight_4 |
Axle Weight 4th
|
|
| can_tacho_inf |
Tachograph Information
|
|
| can_detail_inf |
Detailed Information | Indicators
|
|
| can_lights |
Lights
|
|
| can_doors |
Doors
|
|
| can_total_veh_ovspd |
Total Vehicle Overspeed Time
|
|
| can_total_eng_ovspd |
Total Vehicle Engine Overspeed Time
|
|
| can_eng_cold_starts_cnt |
Engine Cold Starts Count
|
|
| can_eng_all_starts_cnt |
Engine All Starts Count
|
|
| can_eng_starts_by_ign_cnt |
Engine Starts by Ignition Count
|
|
| can_total_eng_cold_run_tm |
Total Engine Cold Running Time
|
|
| can_handbrk_applies_dur_ride_cnt |
Handbrake Applies During Ride Count
|
|
| can_ad_blue_lvl |
Ad-Blue Level
|
|
| can_retarder_usg |
Retarder Usage
|
|
| can_pwr_mode |
Power Mode
|
|
| can_tacho_overspd |
Tachograph Overspeed Signal
|
|
| can_tacho_veh_motion |
Tachograph Vehicle Motion Signal
|
|
| can_tacho_driving_dir |
Tachograph Driving Direction
|
|
| can_a_in |
Analog Input Value
|
|
| can_eng_braking_factor |
Engine Braking Factor
|
|
| can_pedal_braking_factor |
Pedal Braking Factor
|
|
| can_total_accel_kickdowns |
Total Accelerator Kick-downs
|
|
| can_total_effect_eng_spd_tm |
Total Effective Engine Speed Time
|
|
| can_total_cruise_tm |
Total Cruise Control Time
|
|
| can_total_accel_kickdown_tm |
Total Accelerator Kick-down Time
|
|
| can_total_brake_applications |
Total Brake Applications
|
|
| can_tacho_driver_card_1 |
Tachograph Driver 1 Card Number
|
|
| can_tacho_driver_card_2 |
Tachograph Driver 2 Card Number
|
|
| can_tacho_driver_name_1 |
Tachograph Driver 1 Name
|
|
| can_tacho_driver_name_2 |
Tachograph Driver 2 Name
|
|
| can_registration_num |
Registration Number
|
|
| can_rapid_brakings |
Rapid Brakings
|
|
| can_rapid_accel |
Rapid Accelerations
|
|
| can_eng_torque |
Engine Torque
|
|
| can_service_distance |
Service distance
|
|
| can_ambient_temp |
Ambient Temperature
|
|
| can_dtcN |
DTC Number
|
|
| can_dtc_flagN |
DTC Flag
|
|
| can_gas_fuel_lvl_lit |
Gaseous Fuel Level Liter
|
|
| can_gas_fuel_lvl_per |
Gaseous Fuel Level Percent
|
% |
| ecan_batt_instant_volt |
Battery Instantaneous Voltage
|
V |
| ecan_batt_charg_cycles_cnt |
Battery Charging Cycles Count
|
|
| ecan_total_enrg_recup |
Total Energy Recuperated
|
|
| ecan_bat_lvl |
Battery Level
|
|
| ecan_charg_state |
Charging State
|
|
| ecan_batt_temp |
Battery Temperature
|
℃ |
| ecan_bat_charg_curr |
Battery Charging Current
|
|
| ecan_batt_instant_pwr |
Battery Instantaneous Power
|
W |
| ecan_batt_soh |
Battery State of Health (SoH)
|
|
| ecan_total_enrg_used |
Total Energy Used
|
|
| ecan_total_enrg_used_idling |
Total Energy Used When Idling
|
|
| ecan_total_enrg_charged |
Total Energy Charged
|
|
| temp_N |
UART1 Temperature (N -channel number)
|
|
| msg_type |
Message type
|
|
| device_id |
Device ID
|
|
| cmd_key |
Command key
|
|
| protocol_ver |
The version of the protocol
|
|
| sub_cmd |
Subcommand type
|
|
| result |
Result
|
|
| event_type |
The type of event trigger message - 0 - Terminal Power Event
- 1 - Regular Report Event
- 2 - Moving Event
- 3 - Battery Alarm Event
- 4 - Free Fall Alarm Event
- 5 - Tilt Alarm Event
- 6 - Flight Mode Event
- 7 - Crash Alarm Event
- 8 - Light Alarm Event
- 9 - Built-in Temperature Alarm Event
- 10 - Humidity Alarm Event
- 11 - Upgrade Firmware Event
- 12 - External Temperature Alarm Event
|
|
| event_state |
The state of the event
|
|
| frame_count |
The frames count
|
|
| frame_id |
The ID of the current frame
|
|
| network_type |
Current network type
|
|
| pwr_int |
Internal battery voltage
|
V |
| battery |
Internal battery charge level (0-100%)
|
% |
| neighbor_cell_lac |
Cell location area code
|
|
| neighbor_cell_id |
Cell ID
|
|
| neighbor_cell_csq |
The signal strength level
|
|
| build_in_temp |
The current build-in temperature value
|
℃ |
| build_in_hum |
The current build-in humidity value
|
% |
| light_lux |
The current light lux value
|
lux |
| acc_x |
Acceleration value, X axis
|
|
| acc_y |
Acceleration value, Y axis
|
|
| acc_z |
Acceleration value, Z axis
|
|
| rtc_tm |
RTC time
|
|
| 1wire_temp_hash |
Temperature from 1wire sensor (hash - the hash of the sensor ID)
|
|
| upgrade_code |
The code of the upgrade. - 0: The device prepares download the package.
- 1: The device starts to download the package.
- 2: The device finishes downloading the package successfully.
- 3: The device fails to download the package.
- 4: Start upgrade process is refused because the battery is low.
- 11: The device starts to upgrade the firmware.
- 12: The device finishes upgrading the firmware successfully.
- 13: The device fails to upgrade the firmware.
- 14: The upgrade process does not start because the battery is low.
|
|
| generated_tm |
The local time to send the message.
|
|
| main_pwr_vcc |
Main Power VCC
|
V |
| a_in_num |
Analog input number
|
|
| a_in_volt_N |
Analog Input Voltage (N - analog input number)
|
|
| ing_mot_status |
Ignition & Motion State
|
|
| d_in_state |
Digital Input State
|
|
| d_out_state |
Digital Output State
|
|
| mileage |
Current Mileage
|
|
| total_mileage |
Total Mileage
|
|
| gps_sats_num |
GPS Satellite number
|
|
| beidou_sats_num |
BEIDOU Satellite number
|
|
| galileo_sats_num |
GALILEO Satellite number
|
|
| glonass_sats_num |
GLONASS Satellite number
|
|
| all_geo_status |
All GEO Status
|
|
| 1wire_sens_id_N |
1wire Sensor ID (N - sensor number)
|
|
| 1wire_temp_N |
1wire Temperature (N - sensor number)
|
℃ |
| 1wire_hum_N |
1wire Humidity (N - sensor number)
|
% |
| curr_hour_m_cnt |
Current Hour Meter Count
|
|
| total_hour_m_cnt |
Total Hour Meter Count
|
|
| asc_x_forward |
ASC X Forward
|
|
| asc_y_forward |
ASC Y Forward
|
|
| asc_z_forward |
ASC Z Forward
|
|
| asc_x_horizon |
ASC X Horizontal
|
|
| asc_y_horizon |
ASC Y Horizontal
|
|
| asc_z_horizon |
ASC Z Horizontal
|
|
| asc_x_gravity |
ASC X Gravity
|
|
| asc_y_gravity |
ASC Y Gravity
|
|
| asc_z_gravity |
ASC Z Gravity
|
|
| crash_cnt |
Crash Counter
|
|
| asc_status |
ASC Status
|
|
| crash_x |
Crash X Value
|
|
| crash_y |
Crash Y Value
|
|
| crash_z |
Crash Z Value
|
|
| gnss_num |
The number of GNSS points in current message
|
|
| fix_type |
Fix Type
|
|
| hdop |
Horizontal Dilution of Precision
|
|
| can_vin |
VIN
|
|
| can_ign_key |
Ignition Key
|
|
| can_total_distance |
Total Distance
|
|
| can_total_dist_imp |
Total Distance Impulses
|
|
| can_total_fuel |
Total Fuel Used
|
|
| can_speed |
Vehicle Speed
|
|
| can_eng_rpm |
Engine RPM
|
|
| can_eng_cool_temp |
Engine Coolant Temperature
|
|
| can_fuel_cons_l_100km |
Fuel Consumption (L/100km)
|
|
| can_fuel_cons_l_h |
Fuel Consumption (L/H)
|
|
| can_fuel_lvl_lit |
Fuel Level Liter
|
|
| can_fuel_lvl_per |
Fuel Level Percent
|
% |
| can_range |
Range
|
|
| can_acc_pedal_press |
Accelerator Pedal Pressure
|
|
| can_total_eng_hours |
Total Engine Hours
|
|
| can_total_driv_time |
Total Driving Time
|
|
| can_total_eng_idle |
Total Engine Idle Time
|
|
| can_total_idle_fuel |
Total Idle Fuel Used
|
|
| can_axle_weight_1 |
Axle Weight 1st
|
|
| can_axle_weight_2 |
Axle Weight 2nd
|
|
| can_axle_weight_3 |
Axle Weight 3rd
|
|
| can_axle_weight_4 |
Axle Weight 4th
|
|
| can_tacho_inf |
Tachograph Information
|
|
| can_detail_inf |
Detailed Information | Indicators
|
|
| can_lights |
Lights
|
|
| can_doors |
Doors
|
|
| can_total_veh_ovspd |
Total Vehicle Overspeed Time
|
|
| can_total_eng_ovspd |
Total Vehicle Engine Overspeed Time
|
|
| can_eng_cold_starts_cnt |
Engine Cold Starts Count
|
|
| can_eng_all_starts_cnt |
Engine All Starts Count
|
|
| can_eng_starts_by_ign_cnt |
Engine Starts by Ignition Count
|
|
| can_total_eng_cold_run_tm |
Total Engine Cold Running Time
|
|
| can_handbrk_applies_dur_ride_cnt |
Handbrake Applies During Ride Count
|
|
| can_ad_blue_lvl |
Ad-Blue Level
|
|
| can_retarder_usg |
Retarder Usage
|
|
| can_pwr_mode |
Power Mode
|
|
| can_tacho_overspd |
Tachograph Overspeed Signal
|
|
| can_tacho_veh_motion |
Tachograph Vehicle Motion Signal
|
|
| can_tacho_driving_dir |
Tachograph Driving Direction
|
|
| can_a_in |
Analog Input Value
|
|
| can_eng_braking_factor |
Engine Braking Factor
|
|
| can_pedal_braking_factor |
Pedal Braking Factor
|
|
| can_total_accel_kickdowns |
Total Accelerator Kick-downs
|
|
| can_total_effect_eng_spd_tm |
Total Effective Engine Speed Time
|
|
| can_total_cruise_tm |
Total Cruise Control Time
|
|
| can_total_accel_kickdown_tm |
Total Accelerator Kick-down Time
|
|
| can_total_brake_applications |
Total Brake Applications
|
|
| can_tacho_driver_card_1 |
Tachograph Driver 1 Card Number
|
|
| can_tacho_driver_card_2 |
Tachograph Driver 2 Card Number
|
|
| can_tacho_driver_name_1 |
Tachograph Driver 1 Name
|
|
| can_tacho_driver_name_2 |
Tachograph Driver 2 Name
|
|
| can_registration_num |
Registration Number
|
|
| can_rapid_brakings |
Rapid Brakings
|
|
| can_rapid_accel |
Rapid Accelerations
|
|
| can_eng_torque |
Engine Torque
|
|
| can_service_distance |
Service distance
|
|
| can_ambient_temp |
Ambient Temperature
|
|
| can_dtcN |
DTC Number
|
|
| can_dtc_flagN |
DTC Flag
|
|
| can_gas_fuel_lvl_lit |
Gaseous Fuel Level Liter
|
|
| can_gas_fuel_lvl_per |
Gaseous Fuel Level Percent
|
% |
| ecan_batt_instant_volt |
Battery Instantaneous Voltage
|
V |
| ecan_batt_charg_cycles_cnt |
Battery Charging Cycles Count
|
|
| ecan_total_enrg_recup |
Total Energy Recuperated
|
|
| ecan_bat_lvl |
Battery Level
|
|
| ecan_charg_state |
Charging State
|
|
| ecan_batt_temp |
Battery Temperature
|
℃ |
| ecan_bat_charg_curr |
Battery Charging Current
|
|
| ecan_batt_instant_pwr |
Battery Instantaneous Power
|
W |
| ecan_batt_soh |
Battery State of Health (SoH)
|
|
| ecan_total_enrg_used |
Total Energy Used
|
|
| ecan_total_enrg_used_idling |
Total Energy Used When Idling
|
|
| ecan_total_enrg_charged |
Total Energy Charged
|
|
| temp_N |
UART1 Temperature (N -channel number)
|
|
| can_car_model_id |
The car model ID of the CAN Module device. If the value is 0, it
means that no model has been obtained.
|
|
| can_car_name |
Car Name is human readable make and model of the car.
|
|
| can_sync_status |
The CAN Module synchronization status.
⚫ 1: The synchronization is successful.
⚫ 2: CAN Module is not properly connected to the CAN bus or ignition is switched off.
⚫ 3: The car is not supported by the firmware version of CAN Module or CAN-bus codes
has not been recognized.
⚫ 4: CAN Module is not responding.
|
|
| hardware_ver |
The hardware version
|
|
| firmware_ver |
The firmware version
|
|
| modem_software_ver |
The modem software version
|
|
| can_version_num |
The SW version of the CAN device
|
|
| can_serial |
The Serial Number of the CAN device
|
|
| msg_type |
Message type
|
|
| device_id |
Device ID
|
|
| cmd_key |
Command key
|
|
| protocol_ver |
The version of the protocol
|
|
| sub_cmd |
Subcommand type
|
|
| result |
Result
|
|
| event_type |
The type of event trigger message - 0 - Terminal Power Event
- 1 - Regular Report Event
- 2 - Moving Event
- 3 - Battery Alarm Event
- 4 - Free Fall Alarm Event
- 5 - Tilt Alarm Event
- 6 - Flight Mode Event
- 7 - Crash Alarm Event
- 8 - Light Alarm Event
- 9 - Built-in Temperature Alarm Event
- 10 - Humidity Alarm Event
- 11 - Upgrade Firmware Event
- 12 - External Temperature Alarm Event
|
|
| event_state |
The state of the event
|
|
| frame_count |
The frames count
|
|
| frame_id |
The ID of the current frame
|
|
| network_type |
Current network type
|
|
| pwr_int |
Internal battery voltage
|
V |
| battery |
Internal battery charge level (0-100%)
|
% |
| neighbor_cell_lac |
Cell location area code
|
|
| neighbor_cell_id |
Cell ID
|
|
| neighbor_cell_csq |
The signal strength level
|
|
| build_in_temp |
The current build-in temperature value
|
℃ |
| build_in_hum |
The current build-in humidity value
|
% |
| light_lux |
The current light lux value
|
lux |
| acc_x |
Acceleration value, X axis
|
|
| acc_y |
Acceleration value, Y axis
|
|
| acc_z |
Acceleration value, Z axis
|
|
| rtc_tm |
RTC time
|
|
| 1wire_temp_hash |
Temperature from 1wire sensor (hash - the hash of the sensor ID)
|
|
| upgrade_code |
The code of the upgrade. - 0: The device prepares download the package.
- 1: The device starts to download the package.
- 2: The device finishes downloading the package successfully.
- 3: The device fails to download the package.
- 4: Start upgrade process is refused because the battery is low.
- 11: The device starts to upgrade the firmware.
- 12: The device finishes upgrading the firmware successfully.
- 13: The device fails to upgrade the firmware.
- 14: The upgrade process does not start because the battery is low.
|
|
| generated_tm |
The local time to send the message.
|
|
| main_pwr_vcc |
Main Power VCC
|
V |
| a_in_num |
Analog input number
|
|
| a_in_volt_N |
Analog Input Voltage (N - analog input number)
|
|
| ing_mot_status |
Ignition & Motion State
|
|
| d_in_state |
Digital Input State
|
|
| d_out_state |
Digital Output State
|
|
| mileage |
Current Mileage
|
|
| total_mileage |
Total Mileage
|
|
| gps_sats_num |
GPS Satellite number
|
|
| beidou_sats_num |
BEIDOU Satellite number
|
|
| galileo_sats_num |
GALILEO Satellite number
|
|
| glonass_sats_num |
GLONASS Satellite number
|
|
| all_geo_status |
All GEO Status
|
|
| 1wire_sens_id_N |
1wire Sensor ID (N - sensor number)
|
|
| 1wire_temp_N |
1wire Temperature (N - sensor number)
|
℃ |
| 1wire_hum_N |
1wire Humidity (N - sensor number)
|
% |
| curr_hour_m_cnt |
Current Hour Meter Count
|
|
| total_hour_m_cnt |
Total Hour Meter Count
|
|
| asc_x_forward |
ASC X Forward
|
|
| asc_y_forward |
ASC Y Forward
|
|
| asc_z_forward |
ASC Z Forward
|
|
| asc_x_horizon |
ASC X Horizontal
|
|
| asc_y_horizon |
ASC Y Horizontal
|
|
| asc_z_horizon |
ASC Z Horizontal
|
|
| asc_x_gravity |
ASC X Gravity
|
|
| asc_y_gravity |
ASC Y Gravity
|
|
| asc_z_gravity |
ASC Z Gravity
|
|
| crash_cnt |
Crash Counter
|
|
| asc_status |
ASC Status
|
|
| crash_x |
Crash X Value
|
|
| crash_y |
Crash Y Value
|
|
| crash_z |
Crash Z Value
|
|
| gnss_num |
The number of GNSS points in current message
|
|
| fix_type |
Fix Type
|
|
| hdop |
Horizontal Dilution of Precision
|
|
| can_vin |
VIN
|
|
| can_ign_key |
Ignition Key
|
|
| can_total_distance |
Total Distance
|
|
| can_total_dist_imp |
Total Distance Impulses
|
|
| can_total_fuel |
Total Fuel Used
|
|
| can_speed |
Vehicle Speed
|
|
| can_eng_rpm |
Engine RPM
|
|
| can_eng_cool_temp |
Engine Coolant Temperature
|
|
| can_fuel_cons_l_100km |
Fuel Consumption (L/100km)
|
|
| can_fuel_cons_l_h |
Fuel Consumption (L/H)
|
|
| can_fuel_lvl_lit |
Fuel Level Liter
|
|
| can_fuel_lvl_per |
Fuel Level Percent
|
% |
| can_range |
Range
|
|
| can_acc_pedal_press |
Accelerator Pedal Pressure
|
|
| can_total_eng_hours |
Total Engine Hours
|
|
| can_total_driv_time |
Total Driving Time
|
|
| can_total_eng_idle |
Total Engine Idle Time
|
|
| can_total_idle_fuel |
Total Idle Fuel Used
|
|
| can_axle_weight_1 |
Axle Weight 1st
|
|
| can_axle_weight_2 |
Axle Weight 2nd
|
|
| can_axle_weight_3 |
Axle Weight 3rd
|
|
| can_axle_weight_4 |
Axle Weight 4th
|
|
| can_tacho_inf |
Tachograph Information
|
|
| can_detail_inf |
Detailed Information | Indicators
|
|
| can_lights |
Lights
|
|
| can_doors |
Doors
|
|
| can_total_veh_ovspd |
Total Vehicle Overspeed Time
|
|
| can_total_eng_ovspd |
Total Vehicle Engine Overspeed Time
|
|
| can_eng_cold_starts_cnt |
Engine Cold Starts Count
|
|
| can_eng_all_starts_cnt |
Engine All Starts Count
|
|
| can_eng_starts_by_ign_cnt |
Engine Starts by Ignition Count
|
|
| can_total_eng_cold_run_tm |
Total Engine Cold Running Time
|
|
| can_handbrk_applies_dur_ride_cnt |
Handbrake Applies During Ride Count
|
|
| can_ad_blue_lvl |
Ad-Blue Level
|
|
| can_retarder_usg |
Retarder Usage
|
|
| can_pwr_mode |
Power Mode
|
|
| can_tacho_overspd |
Tachograph Overspeed Signal
|
|
| can_tacho_veh_motion |
Tachograph Vehicle Motion Signal
|
|
| can_tacho_driving_dir |
Tachograph Driving Direction
|
|
| can_a_in |
Analog Input Value
|
|
| can_eng_braking_factor |
Engine Braking Factor
|
|
| can_pedal_braking_factor |
Pedal Braking Factor
|
|
| can_total_accel_kickdowns |
Total Accelerator Kick-downs
|
|
| can_total_effect_eng_spd_tm |
Total Effective Engine Speed Time
|
|
| can_total_cruise_tm |
Total Cruise Control Time
|
|
| can_total_accel_kickdown_tm |
Total Accelerator Kick-down Time
|
|
| can_total_brake_applications |
Total Brake Applications
|
|
| can_tacho_driver_card_1 |
Tachograph Driver 1 Card Number
|
|
| can_tacho_driver_card_2 |
Tachograph Driver 2 Card Number
|
|
| can_tacho_driver_name_1 |
Tachograph Driver 1 Name
|
|
| can_tacho_driver_name_2 |
Tachograph Driver 2 Name
|
|
| can_registration_num |
Registration Number
|
|
| can_rapid_brakings |
Rapid Brakings
|
|
| can_rapid_accel |
Rapid Accelerations
|
|
| can_eng_torque |
Engine Torque
|
|
| can_service_distance |
Service distance
|
|
| can_ambient_temp |
Ambient Temperature
|
|
| can_dtcN |
DTC Number
|
|
| can_dtc_flagN |
DTC Flag
|
|
| can_gas_fuel_lvl_lit |
Gaseous Fuel Level Liter
|
|
| can_gas_fuel_lvl_per |
Gaseous Fuel Level Percent
|
% |
| ecan_batt_instant_volt |
Battery Instantaneous Voltage
|
V |
| ecan_batt_charg_cycles_cnt |
Battery Charging Cycles Count
|
|
| ecan_total_enrg_recup |
Total Energy Recuperated
|
|
| ecan_bat_lvl |
Battery Level
|
|
| ecan_charg_state |
Charging State
|
|
| ecan_batt_temp |
Battery Temperature
|
℃ |
| ecan_bat_charg_curr |
Battery Charging Current
|
|
| ecan_batt_instant_pwr |
Battery Instantaneous Power
|
W |
| ecan_batt_soh |
Battery State of Health (SoH)
|
|
| ecan_total_enrg_used |
Total Energy Used
|
|
| ecan_total_enrg_used_idling |
Total Energy Used When Idling
|
|
| ecan_total_enrg_charged |
Total Energy Charged
|
|
| temp_N |
UART1 Temperature (N -channel number)
|
|
| msg_type |
Message type
|
|
| device_id |
Device ID
|
|
| cmd_key |
Command key
|
|
| protocol_ver |
The version of the protocol
|
|
| sub_cmd |
Subcommand type
|
|
| result |
Result
|
|
| event_type |
The type of event trigger message - 0 - Terminal Power Event
- 1 - Regular Report Event
- 2 - Moving Event
- 3 - Battery Alarm Event
- 4 - Free Fall Alarm Event
- 5 - Tilt Alarm Event
- 6 - Flight Mode Event
- 7 - Crash Alarm Event
- 8 - Light Alarm Event
- 9 - Built-in Temperature Alarm Event
- 10 - Humidity Alarm Event
- 11 - Upgrade Firmware Event
- 12 - External Temperature Alarm Event
|
|
| event_state |
The state of the event
|
|
| frame_count |
The frames count
|
|
| frame_id |
The ID of the current frame
|
|
| network_type |
Current network type
|
|
| pwr_int |
Internal battery voltage
|
V |
| battery |
Internal battery charge level (0-100%)
|
% |
| neighbor_cell_lac |
Cell location area code
|
|
| neighbor_cell_id |
Cell ID
|
|
| neighbor_cell_csq |
The signal strength level
|
|
| build_in_temp |
The current build-in temperature value
|
℃ |
| build_in_hum |
The current build-in humidity value
|
% |
| light_lux |
The current light lux value
|
lux |
| acc_x |
Acceleration value, X axis
|
|
| acc_y |
Acceleration value, Y axis
|
|
| acc_z |
Acceleration value, Z axis
|
|
| rtc_tm |
RTC time
|
|
| 1wire_temp_hash |
Temperature from 1wire sensor (hash - the hash of the sensor ID)
|
|
| upgrade_code |
The code of the upgrade. - 0: The device prepares download the package.
- 1: The device starts to download the package.
- 2: The device finishes downloading the package successfully.
- 3: The device fails to download the package.
- 4: Start upgrade process is refused because the battery is low.
- 11: The device starts to upgrade the firmware.
- 12: The device finishes upgrading the firmware successfully.
- 13: The device fails to upgrade the firmware.
- 14: The upgrade process does not start because the battery is low.
|
|
| generated_tm |
The local time to send the message.
|
|
| main_pwr_vcc |
Main Power VCC
|
V |
| a_in_num |
Analog input number
|
|
| a_in_volt_N |
Analog Input Voltage (N - analog input number)
|
|
| ing_mot_status |
Ignition & Motion State
|
|
| d_in_state |
Digital Input State
|
|
| d_out_state |
Digital Output State
|
|
| mileage |
Current Mileage
|
|
| total_mileage |
Total Mileage
|
|
| gps_sats_num |
GPS Satellite number
|
|
| beidou_sats_num |
BEIDOU Satellite number
|
|
| galileo_sats_num |
GALILEO Satellite number
|
|
| glonass_sats_num |
GLONASS Satellite number
|
|
| all_geo_status |
All GEO Status
|
|
| 1wire_sens_id_N |
1wire Sensor ID (N - sensor number)
|
|
| 1wire_temp_N |
1wire Temperature (N - sensor number)
|
℃ |
| 1wire_hum_N |
1wire Humidity (N - sensor number)
|
% |
| curr_hour_m_cnt |
Current Hour Meter Count
|
|
| total_hour_m_cnt |
Total Hour Meter Count
|
|
| asc_x_forward |
ASC X Forward
|
|
| asc_y_forward |
ASC Y Forward
|
|
| asc_z_forward |
ASC Z Forward
|
|
| asc_x_horizon |
ASC X Horizontal
|
|
| asc_y_horizon |
ASC Y Horizontal
|
|
| asc_z_horizon |
ASC Z Horizontal
|
|
| asc_x_gravity |
ASC X Gravity
|
|
| asc_y_gravity |
ASC Y Gravity
|
|
| asc_z_gravity |
ASC Z Gravity
|
|
| crash_cnt |
Crash Counter
|
|
| asc_status |
ASC Status
|
|
| crash_x |
Crash X Value
|
|
| crash_y |
Crash Y Value
|
|
| crash_z |
Crash Z Value
|
|
| gnss_num |
The number of GNSS points in current message
|
|
| fix_type |
Fix Type
|
|
| hdop |
Horizontal Dilution of Precision
|
|
| can_vin |
VIN
|
|
| can_ign_key |
Ignition Key
|
|
| can_total_distance |
Total Distance
|
|
| can_total_dist_imp |
Total Distance Impulses
|
|
| can_total_fuel |
Total Fuel Used
|
|
| can_speed |
Vehicle Speed
|
|
| can_eng_rpm |
Engine RPM
|
|
| can_eng_cool_temp |
Engine Coolant Temperature
|
|
| can_fuel_cons_l_100km |
Fuel Consumption (L/100km)
|
|
| can_fuel_cons_l_h |
Fuel Consumption (L/H)
|
|
| can_fuel_lvl_lit |
Fuel Level Liter
|
|
| can_fuel_lvl_per |
Fuel Level Percent
|
% |
| can_range |
Range
|
|
| can_acc_pedal_press |
Accelerator Pedal Pressure
|
|
| can_total_eng_hours |
Total Engine Hours
|
|
| can_total_driv_time |
Total Driving Time
|
|
| can_total_eng_idle |
Total Engine Idle Time
|
|
| can_total_idle_fuel |
Total Idle Fuel Used
|
|
| can_axle_weight_1 |
Axle Weight 1st
|
|
| can_axle_weight_2 |
Axle Weight 2nd
|
|
| can_axle_weight_3 |
Axle Weight 3rd
|
|
| can_axle_weight_4 |
Axle Weight 4th
|
|
| can_tacho_inf |
Tachograph Information
|
|
| can_detail_inf |
Detailed Information | Indicators
|
|
| can_lights |
Lights
|
|
| can_doors |
Doors
|
|
| can_total_veh_ovspd |
Total Vehicle Overspeed Time
|
|
| can_total_eng_ovspd |
Total Vehicle Engine Overspeed Time
|
|
| can_eng_cold_starts_cnt |
Engine Cold Starts Count
|
|
| can_eng_all_starts_cnt |
Engine All Starts Count
|
|
| can_eng_starts_by_ign_cnt |
Engine Starts by Ignition Count
|
|
| can_total_eng_cold_run_tm |
Total Engine Cold Running Time
|
|
| can_handbrk_applies_dur_ride_cnt |
Handbrake Applies During Ride Count
|
|
| can_ad_blue_lvl |
Ad-Blue Level
|
|
| can_retarder_usg |
Retarder Usage
|
|
| can_pwr_mode |
Power Mode
|
|
| can_tacho_overspd |
Tachograph Overspeed Signal
|
|
| can_tacho_veh_motion |
Tachograph Vehicle Motion Signal
|
|
| can_tacho_driving_dir |
Tachograph Driving Direction
|
|
| can_a_in |
Analog Input Value
|
|
| can_eng_braking_factor |
Engine Braking Factor
|
|
| can_pedal_braking_factor |
Pedal Braking Factor
|
|
| can_total_accel_kickdowns |
Total Accelerator Kick-downs
|
|
| can_total_effect_eng_spd_tm |
Total Effective Engine Speed Time
|
|
| can_total_cruise_tm |
Total Cruise Control Time
|
|
| can_total_accel_kickdown_tm |
Total Accelerator Kick-down Time
|
|
| can_total_brake_applications |
Total Brake Applications
|
|
| can_tacho_driver_card_1 |
Tachograph Driver 1 Card Number
|
|
| can_tacho_driver_card_2 |
Tachograph Driver 2 Card Number
|
|
| can_tacho_driver_name_1 |
Tachograph Driver 1 Name
|
|
| can_tacho_driver_name_2 |
Tachograph Driver 2 Name
|
|
| can_registration_num |
Registration Number
|
|
| can_rapid_brakings |
Rapid Brakings
|
|
| can_rapid_accel |
Rapid Accelerations
|
|
| can_eng_torque |
Engine Torque
|
|
| can_service_distance |
Service distance
|
|
| can_ambient_temp |
Ambient Temperature
|
|
| can_dtcN |
DTC Number
|
|
| can_dtc_flagN |
DTC Flag
|
|
| can_gas_fuel_lvl_lit |
Gaseous Fuel Level Liter
|
|
| can_gas_fuel_lvl_per |
Gaseous Fuel Level Percent
|
% |
| ecan_batt_instant_volt |
Battery Instantaneous Voltage
|
V |
| ecan_batt_charg_cycles_cnt |
Battery Charging Cycles Count
|
|
| ecan_total_enrg_recup |
Total Energy Recuperated
|
|
| ecan_bat_lvl |
Battery Level
|
|
| ecan_charg_state |
Charging State
|
|
| ecan_batt_temp |
Battery Temperature
|
℃ |
| ecan_bat_charg_curr |
Battery Charging Current
|
|
| ecan_batt_instant_pwr |
Battery Instantaneous Power
|
W |
| ecan_batt_soh |
Battery State of Health (SoH)
|
|
| ecan_total_enrg_used |
Total Energy Used
|
|
| ecan_total_enrg_used_idling |
Total Energy Used When Idling
|
|
| ecan_total_enrg_charged |
Total Energy Charged
|
|
| temp_N |
UART1 Temperature (N -channel number)
|
|
| can_car_model_id |
The car model ID of the CAN Module device. If the value is 0, it
means that no model has been obtained.
|
|
| can_car_name |
Car Name is human readable make and model of the car.
|
|
| can_sync_status |
The CAN Module synchronization status.
⚫ 1: The synchronization is successful.
⚫ 2: CAN Module is not properly connected to the CAN bus or ignition is switched off.
⚫ 3: The car is not supported by the firmware version of CAN Module or CAN-bus codes
has not been recognized.
⚫ 4: CAN Module is not responding.
|
|
| hardware_ver |
The hardware version
|
|
| firmware_ver |
The firmware version
|
|
| modem_software_ver |
The modem software version
|
|
| can_version_num |
The SW version of the CAN device
|
|
| can_serial |
The Serial Number of the CAN device
|
|
