Localizador GPS HINOVA HE114 | Integrado con Wialon

Características HINOVA HE114:

2G
4G/LTE

Puede ser apoyada por la petición:

Modificación del parámetro "speed"
Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de HINOVA HE114 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	HINOVA HE114
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración HINOVA HE114 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22617

En el centro de servicio Wialon se utilizan 92 unidades HINOVA HE114 — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
temp	Fuel temperature
pwr_int	Battery voltage(mV)
visible_sats	Visible satellites
content	the command response content
hdop	HDOP
gsm	GSM signal strength degree
pwr_ext	Voltage level
cell_id	Cell Tower ID
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
battery_vol	Battery Voltage
lac	Location Area Code
iccid	iccid number
mnc	Mobile Network Code
status_trig_time1	Report status: Trigger time
server_flag	It refers to the data to send (by the coding format);
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
mileage	Mileage statistics
battery	Fuel level battery value
gsm_signal_csq	GSM Signal CSQ
door	Door status
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
imei	imei number
status_reg_content	Report status: Trigger content
sequence_num	Sequence Number
imsi	imsi number
mcc	Mobile Country Code
time	Time stamp
acc	ACC Status. ACC low: 0, ACC high: 1
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
encoding	0X01: UTF-8 0x02: ASCII;
rssi	LBS Main Cell Tower, rssi
sensor_percent	Fuel level in percent
gps_time_status	GPS is Real Time or Reupload
odometer	Odometer
sats	Number of satellites
boot_reason	Boot Reason

Nombre del parámetro

Descripción

Unidades de medida

temp

Fuel temperature

pwr_int

Battery voltage(mV)

visible_sats

Visible satellites

content

the command response content

hdop

HDOP

gsm

GSM signal strength degree

pwr_ext

Voltage level

cell_id

Cell Tower ID

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

battery_vol

Battery Voltage

lac

Location Area Code

iccid

iccid number

mnc

Mobile Network Code

status_trig_time1

Report status: Trigger time

server_flag

It refers to the data to send (by the coding format);

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

mileage

Mileage statistics

battery

Fuel level battery value

gsm_signal_csq

GSM Signal CSQ

door

Door status

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

imei

imei number

status_reg_content

Report status: Trigger content

sequence_num

Sequence Number

imsi

imsi number

mcc

Mobile Country Code

time

Time stamp

acc

ACC Status. ACC low: 0, ACC high: 1

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

encoding

0X01: UTF-8
0x02: ASCII;

rssi

LBS Main Cell Tower, rssi

sensor_percent

Fuel level in percent

gps_time_status

GPS is Real Time or Reupload

odometer

Odometer

sats

Number of satellites

boot_reason

Boot Reason

Wialon: una plataforma para todas sus necesidades

HINOVA HE114

Haga crecer su negocio con nosotros

Conviértase en socio de Wialon

Busque a un proveedor local de Wialon