Localizador GPS iTR 270 | Integrado con Wialon

Características iTR 270:

Soportado en Wialon:

Gestión remota vía GPRS
Indentificación del conductor
Sensores Digitales
Gestión remota vía SMS
Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de iTR 270 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	iTR 270
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración iTR 270 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22697

En el centro de servicio Wialon se utilizan 1 unidades iTR 270 — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
vehicle_status	Alarm code Status Bit 32: Panic button. (1=SOS, 0= without SOS) Bit 31: ACC IN1 (1= ignition ON, 0= ignition OFF) Bit 30: Over speed (1= over speed, 0= without over speed) Bit 29: External power (1= with supply power, 0= without supply power) Bit 28: GEO fence(out) (1=out alarm, 0= none out alarm) Bit 27: GEO fence(in) (1= GEO in alarm, 0= without in alarm) Bit 26: GPS antenna drop (1= GPS antenna drop alarm, 0= GPS antenna is ok) Bit 25: GPS module error (1= module error, 0= GPS module is ok) Bit 24: Output1 (1= digital output1 in high level, 0= digital output1 in low level) Bit 23: Output2 (1= digital output2 in high level, 0= digital output2 in low level) Bit 22: Output3 (1= digital output3 in high level, 0= digital output3 in low level) Bit 21: IN2 (digital input 2) (1= digital intput2 has been triggered, 0= digital input2 without triggering) Bit 20: IN4 (digital input 4) (1= digital intput4 has been triggered, 0= digital input4 without triggering) Bit 19: Shocking (1= shocking alarm, 0= without shocking). Status will show ‘1’ if it’s in shocking even shock alarm has been disabled. Bit 18: Idle (1= Idle speed alarm, 0= without idle speed) Bit 17: Inner battery in low level (1= inner battery voltage is low, 0= inner battery voltage is ok) Bit 16: Unauthorized Driving (1= Unauthorized driving, 0 = without unauthorized driving) Bit 15: GPS status (1= GPS fixed, 0= No GPS fixed) Bit 14: Inner batter in charging (1= battery charge, 0= batter not charging)
charge_indicator	Charge indicator: A=1: charging, A=0:Non-charging;
pwr_int	Battery voltage.	V
pwr_ext	External power source.	V
adc 1	Collected voltage. One analog sensor.	V
lac	Location area code.
cell_id	Cell ID
hdop	Horizontal dilution of precision
mileage	Mileage between last pcs GPRS message and current data.	m
rpm	RPM	r/min
login_tm	login time
ibutton	ID of the ibutton card
total_mileage	mileage	m
freq	Frequency
temp	Temperature

Nombre del parámetro

Descripción

Unidades de medida

vehicle_status

Alarm code Status

Bit 32: Panic button. (1=SOS, 0= without SOS)

Bit 31: ACC IN1 (1= ignition ON, 0= ignition OFF)

Bit 30: Over speed (1= over speed, 0= without over speed)

Bit 29: External power (1= with supply power, 0= without supply power)

Bit 28: GEO fence(out) (1=out alarm, 0= none out alarm)

Bit 27: GEO fence(in) (1= GEO in alarm, 0= without in alarm)

Bit 26: GPS antenna drop (1= GPS antenna drop alarm, 0= GPS antenna is ok)

Bit 25: GPS module error (1= module error, 0= GPS module is ok)

Bit 24: Output1 (1= digital output1 in high level, 0= digital output1 in low level)

Bit 23: Output2 (1= digital output2 in high level, 0= digital output2 in low level)

Bit 22: Output3 (1= digital output3 in high level, 0= digital output3 in low level)

Bit 21: IN2 (digital input 2) (1= digital intput2 has been triggered, 0= digital input2 without triggering)

Bit 20: IN4 (digital input 4) (1= digital intput4 has been triggered, 0= digital input4 without triggering)

Bit 19: Shocking (1= shocking alarm, 0= without shocking). Status will show ‘1’ if it’s in shocking even shock alarm has been disabled.

Bit 18: Idle (1= Idle speed alarm, 0= without idle speed)

Bit 17: Inner battery in low level (1= inner battery voltage is low, 0= inner battery voltage is ok)

Bit 16: Unauthorized Driving (1= Unauthorized driving, 0 = without unauthorized driving)

Bit 15: GPS status (1= GPS fixed, 0= No GPS fixed)

Bit 14: Inner batter in charging (1= battery charge, 0= batter not charging)

charge_indicator

Charge indicator: A=1: charging, A=0:Non-charging;

pwr_int

Battery voltage.

pwr_ext

External power source.

adc 1

Collected voltage. One analog sensor.

lac

Location area code.

cell_id

Cell ID

hdop

Horizontal dilution of precision

mileage

Mileage between last pcs GPRS message and current data.

rpm

RPM

r/min

login_tm

ibutton

ID of the ibutton card

total_mileage

mileage

freq

Frequency

temp

Temperature

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Products

Soluciones de nicho para satisfacer las tareas específicas

iTR 270

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Hacerse socio

Solicite Wialon en su región

Por favor, llene la solicitud para iniciar el trabajo con Wialon