Localizador GPS Pengsent FM06E | Integrado con Wialon

Características Pengsent FM06E:

4G/LTE
Llamadas de voz

Soportado en Wialon:

Gestión remota vía GPRS
Gestión remota vía SMS
Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de Pengsent FM06E en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	Pengsent FM06E
ID único:	custom

Indique los siguientes parámetros en el programa de configuración o en la configuración Pengsent FM06E para utilizarlos en Wialon Hosting :

Puerto del servidor:

22589

En el centro de servicio Wialon se utilizan 4 unidades Pengsent FM06E — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
battery_vol	Battery Voltage
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
mnc	Mobile Network Code
gps_time_status	GPS is Real Time or Reupload
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
status_trig_time1	Report status: Trigger time
pwr_int	Battery voltage(mV)
gsm_signal_csq	GSM Signal CSQ
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
battery	Fuel level battery value
temp	Fuel temperature
pwr_ext	Voltage level
cell_id	Cell Tower ID
imsi	imsi number
visible_sats	Visible satellites
time	Time stamp
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
mileage	Mileage statistics
mcc	Mobile Country Code
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
boot_reason	Boot Reason
sats	Number of satellites
lac	Location Area Code
server_flag	It refers to the data to send (by the coding format);
hdop	HDOP
acc	ACC Status. ACC low: 0, ACC high: 1
iccid	iccid number
status_reg_content	Report status: Trigger content
door	Door status
rssi	LBS Main Cell Tower, rssi
sequence_num	Sequence Number
sensor_percent	Fuel level in percent
encoding	0X01: UTF-8 0x02: ASCII;
imei	imei number
content	the command response content
odometer	Odometer
gsm	GSM signal strength degree

Nombre del parámetro

Descripción

Unidades de medida

battery_vol

Battery Voltage

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

mnc

Mobile Network Code

gps_time_status

GPS is Real Time or Reupload

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

status_trig_time1

Report status: Trigger time

pwr_int

Battery voltage(mV)

gsm_signal_csq

GSM Signal CSQ

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

battery

Fuel level battery value

temp

Fuel temperature

pwr_ext

Voltage level

cell_id

Cell Tower ID

imsi

imsi number

visible_sats

Visible satellites

time

Time stamp

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

mileage

Mileage statistics

mcc

Mobile Country Code

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

boot_reason

Boot Reason

sats

Number of satellites

lac

Location Area Code

server_flag

It refers to the data to send (by the coding format);

hdop

HDOP

acc

ACC Status. ACC low: 0, ACC high: 1

iccid

iccid number

status_reg_content

Report status: Trigger content

door

Door status

rssi

LBS Main Cell Tower, rssi

sequence_num

Sequence Number

sensor_percent

Fuel level in percent

encoding

0X01: UTF-8
0x02: ASCII;

imei

imei number

content

the command response content

odometer

Odometer

gsm

GSM signal strength degree

Wialon: una plataforma para todas sus necesidades

Pengsent FM06E

Otros dispositivos del fabricante

Haga crecer su negocio con nosotros

Conviértase en socio de Wialon

Busque a un proveedor local de Wialon