Localizador GPS Skywonder H9 | Integrado con Wialon

Características Skywonder H9:

2G
4G/LTE
Caja negra

Soportado en Wialon:

Gestión remota vía GPRS
Gestión remota vía SMS
Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de Skywonder H9 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	Skywonder H9
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Skywonder H9 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22858

En el centro de servicio Wialon se utilizan 1 unidades Skywonder H9 — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
time	Time stamp
acc	ACC Status. ACC low: 0, ACC high: 1
mnc	Mobile Network Code
server_flag	It refers to the data to send (by the coding format);
gps_time_status	GPS is Real Time or Reupload
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
battery	Fuel level battery value
door	Door status
battery_vol	Battery Voltage
lac	Location Area Code
visible_sats	Visible satellites
boot_reason	Boot Reason
sats	Number of satellites
temp	Fuel temperature
encoding	0X01: UTF-8 0x02: ASCII;
imei	imei number
iccid	iccid number
content	the command response content
gsm_signal_csq	GSM Signal CSQ
sensor_percent	Fuel level in percent
pwr_ext	Voltage level
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
status_trig_time1	Report status: Trigger time
mcc	Mobile Country Code
cell_id	Cell Tower ID
odometer	Odometer
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
imsi	imsi number
pwr_int	Battery voltage(mV)
gsm	GSM signal strength degree
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
hdop	HDOP
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
rssi	LBS Main Cell Tower, rssi
sequence_num	Sequence Number
status_reg_content	Report status: Trigger content
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
mileage	Mileage statistics

Nombre del parámetro

Descripción

Unidades de medida

time

Time stamp

acc

ACC Status. ACC low: 0, ACC high: 1

mnc

Mobile Network Code

server_flag

It refers to the data to send (by the coding format);

gps_time_status

GPS is Real Time or Reupload

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

battery

Fuel level battery value

door

Door status

battery_vol

Battery Voltage

lac

Location Area Code

visible_sats

Visible satellites

boot_reason

Boot Reason

sats

Number of satellites

temp

Fuel temperature

encoding

0X01: UTF-8
0x02: ASCII;

imei

imei number

iccid

iccid number

content

the command response content

gsm_signal_csq

GSM Signal CSQ

sensor_percent

Fuel level in percent

pwr_ext

Voltage level

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

status_trig_time1

Report status: Trigger time

mcc

Mobile Country Code

cell_id

Cell Tower ID

odometer

Odometer

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

imsi

imsi number

pwr_int

Battery voltage(mV)

gsm

GSM signal strength degree

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

hdop

HDOP

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

rssi

LBS Main Cell Tower, rssi

sequence_num

Sequence Number

status_reg_content

Report status: Trigger content

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

mileage

Mileage statistics

Wialon: una plataforma para todas sus necesidades

Skywonder H9

Otros dispositivos del fabricante

Haga crecer su negocio con nosotros

Conviértase en socio de Wialon

Busque a un proveedor local de Wialon