Localizador GPS TZ-LoRa Gateway | Integrado con Wialon

Características TZ-LoRa Gateway:

Caja negra
LoRaWAN

Soportado en Wialon:

Sensores ADC
Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de TZ-LoRa Gateway en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	TZ-LoRa Gateway
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración TZ-LoRa Gateway para utilizarlos en Wialon Hosting :

Puerto del servidor:

21519

En el centro de servicio Wialon se utilizan 69 unidades TZ-LoRa Gateway — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
gsm_status	Bitwise variable where each bit means Bit 7-6 :reserved Bit 5: 1-TCP\UDP connected 0-TCP\UDP not connected Bit4: 1-4G network connected 0-4G network not connected Bit3: 1-roaming 0-not roaming Bit2: 1-GSM network connected 0-GSM network not connected Bit1: 1-Detected SIM card 0-no SIM card Bit0: 1-GSM module is on 0-GSM module is off
gsm	GSM Signal strength
alarm_type	0xAA - Interval 4G data 0x10 - Low battery alarm 0x60 - Begin charge 0x61 - End charge
terminal_status	Bitwise variable where each bit means Bit7: 1- connected to power 0- not connected to power Bit6: 1- This packet is the last packet of this packet index 0- This packet is not the last packet of this packetindex Bit 5-0 :reserved
pwr_int	Internal battery voltage	V
pwr_ext	External power voltage	V
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Unique cell identifier
sensor_num_[ID of the sensor]	The number of sensor in this packet
sensor_type_[ID of the sensor]	Sensor type 0x01 - TAG07/07B/08/08L/09 0x04 - TAG08B 0x11 - TAG11
sensor_status_[ID of the sensor]	Bitwise variable where each bit means bit7: Battery voltage status, 1-low Voltage 0- Voltage normal; bit6: Temperature alert status 1-Temperature alert 0- Temperature normal; bit5: Sensor button status 1-Press sensor button 0-Don’t press button button bit4: Sensor ACK switch 1-Sensor ACK enable 0-Sensor ACK disabl bit3: RTC time; 1-Sensor RTC enable 2-Sensor RTC disable; bit2-0:reserved;
sensor_bat_pwr_[ID of the sensor]	Only for TAG11 sensor Battery voltage	V
sensor_pwr_int_[ID of the sensor]	Internal power voltage of the sensor	V
sensor_current_[ID of the sensor]	Only for TAG11 sensor Current value of the sensor	mA
sensor_switch_[ID of the sensor]	Only for TAG11 sensor Switching status 0: Connected 1: Disconnected
sensor_temp_status_[ID of the sensor]	Only for TAG07/07B/08/08B/08L/09 sensor A Bitwise variable where each bit means Bit15:sensor is normal or abnormal 1- abnormal 0- normal Bit14:temperature is positive(+) or negative(-), 0-positive 1-negative Bit13-0: temperature value
sensor_humm_[ID of the sensor]	Only for Only for TAG07/07B/08/08B/08L/09 sensor Humidity value from the sensor. If value = 0xFF (255 in dec), then no humidity	%
sensor_temp_[ID of the sensor]	Only for TAG07/07B/08/08B/08L/09 sensor Temperature value from the sensor	C
sensor_rssi_[ID of the sensor]	Signal strength of the sensor	dB
sensor_tm_[ID of the sensor]	Sensor time

Nombre del parámetro

Descripción

Unidades de medida

gsm_status

Bitwise variable where each bit means

Bit 7-6 :reserved
Bit 5:
- 1-TCP\UDP connected
- 0-TCP\UDP not connected
Bit4:
- 1-4G network connected
- 0-4G network not connected
Bit3:
- 1-roaming
- 0-not roaming
Bit2:
- 1-GSM network connected
- 0-GSM network not connected
Bit1:
- 1-Detected SIM card
- 0-no SIM card
Bit0:
- 1-GSM module is on
- 0-GSM module is off

gsm

GSM Signal strength

alarm_type

0xAA - Interval 4G data
0x10 - Low battery alarm
0x60 - Begin charge
0x61 - End charge

terminal_status

Bitwise variable where each bit means

Bit7:
- 1- connected to power
- 0- not connected to power
Bit6:
- 1- This packet is the last packet of this packet index
- 0- This packet is not the last packet of this packetindex
Bit 5-0 :reserved

pwr_int

Internal battery voltage

pwr_ext

External power voltage

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Unique cell identifier

sensor_num_[ID of the sensor]

The number of sensor in this packet

sensor_type_[ID of the sensor]

Sensor type

0x01 - TAG07/07B/08/08L/09
0x04 - TAG08B
0x11 - TAG11

sensor_status_[ID of the sensor]

Bitwise variable where each bit means

bit7: Battery voltage status,
- 1-low Voltage
- 0- Voltage normal;
bit6: Temperature alert status
- 1-Temperature alert
- 0- Temperature normal;
bit5: Sensor button status
- 1-Press sensor button
- 0-Don’t press button button
bit4: Sensor ACK switch
- 1-Sensor ACK enable
- 0-Sensor ACK disabl
bit3: RTC time;
- 1-Sensor RTC enable
- 2-Sensor RTC disable;
bit2-0:reserved;

sensor_bat_pwr_[ID of the sensor]

Only for TAG11 sensor

Battery voltage

sensor_pwr_int_[ID of the sensor]

Internal power voltage of the sensor

sensor_current_[ID of the sensor]

Only for TAG11 sensor

Current value of the sensor

sensor_switch_[ID of the sensor]

Only for TAG11 sensor

Switching status

0: Connected
1: Disconnected

sensor_temp_status_[ID of the sensor]

Only for TAG07/07B/08/08B/08L/09 sensor

A Bitwise variable where each bit means

Bit15:sensor is normal or abnormal
- 1- abnormal
- 0- normal
Bit14:temperature is positive(+) or negative(-),
- 0-positive
- 1-negative
Bit13-0: temperature value

sensor_humm_[ID of the sensor]

Only for Only for TAG07/07B/08/08B/08L/09 sensor

Humidity value from the sensor. If value = 0xFF (255 in dec), then no humidity

sensor_temp_[ID of the sensor]

Only for TAG07/07B/08/08B/08L/09 sensor

Temperature value from the sensor

sensor_rssi_[ID of the sensor]

Signal strength of the sensor

sensor_tm_[ID of the sensor]

Sensor time

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Products

Soluciones de nicho para satisfacer las tareas específicas

TZ-LoRa Gateway

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Hacerse socio

Solicite Wialon en su región

Por favor, llene la solicitud para iniciar el trabajo con Wialon