TZ-LoRa Gateway

TZ-LoRa Gateway
Manufacturer: T-Zone
Forum Discussion

Number of units

38
Online
48
Total
Features TZ-LoRa Gateway:
  • Blackbox
  • LoRaWAN
Supported in Wialon:
  • ADC sensors
  • Communication via TCP

The following data should also be added to TZ-LoRa Gateway unit properties section of Wialon GPS tracking software :

Device type: TZ-LoRa Gateway
Unique ID: imei

Specify the following parameters in configuration software or configuration TZ-LoRa Gateway for use in Wialon Hosting :

Server port: 21519

48 units of TZ-LoRa Gateway device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
gsm_status

Bitwise variable where each bit means

  • Bit 7-6 :reserved
  • Bit 5:
    • 1-TCP\UDP connected
    • 0-TCP\UDP not connected
  • Bit4:
    • 1-4G network connected
    • 0-4G network not connected
  • Bit3:
    • 1-roaming
    • 0-not roaming
  • Bit2:
    • 1-GSM network connected
    • 0-GSM network not connected
  • Bit1:
    • 1-Detected SIM card
    • 0-no SIM card
  • Bit0:
    • 1-GSM module is on
    • 0-GSM module is off

gsm

GSM Signal strength

alarm_type
  • 0xAA - Interval 4G data
  • 0x10 - Low battery alarm
  • 0x60 - Begin charge
  • 0x61 - End charge
terminal_status

Bitwise variable where each bit means

  • Bit7:
    • 1- connected to power
    • 0- not connected to power
  • Bit6:
    • 1- This packet is the last packet of this packet index
    • 0- This packet is not the last packet of this packetindex
  • Bit 5-0 :reserved

pwr_int

Internal battery voltage

V
pwr_ext

External power voltage

V
mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Unique cell identifier

sensor_num_[ID of the sensor]

The number of sensor in this packet

sensor_type_[ID of the sensor]

Sensor type

  • 0x01 - TAG07/07B/08/08L/09
  • 0x04 - TAG08B
  • 0x11 - TAG11

sensor_status_[ID of the sensor]

Bitwise variable where each bit means

  • bit7: Battery voltage status,
    • 1-low Voltage
    • 0- Voltage normal;
  • bit6: Temperature alert status
    • 1-Temperature alert
    • 0- Temperature normal;
  • bit5: Sensor button status
    • 1-Press sensor button
    • 0-Don’t press button button
  • bit4: Sensor ACK switch
    • 1-Sensor ACK enable
    • 0-Sensor ACK disabl
  • bit3: RTC time;
    • 1-Sensor RTC enable
    • 2-Sensor RTC disable;
  • bit2-0:reserved;

sensor_bat_pwr_[ID of the sensor]

Only for TAG11 sensor

Battery voltage

V
sensor_pwr_int_[ID of the sensor]

Internal power voltage of the sensor

V
sensor_current_[ID of the sensor]

Only for TAG11 sensor

Current value of the sensor

mA
sensor_switch_[ID of the sensor]

Only for TAG11 sensor

Switching status

  • 0: Connected
  • 1: Disconnected

sensor_temp_status_[ID of the sensor]

Only for TAG07/07B/08/08B/08L/09 sensor

A Bitwise variable where each bit means

  • Bit15:sensor is normal or abnormal
    • 1- abnormal
    • 0- normal
  • Bit14:temperature is positive(+) or negative(-),
    • 0-positive
    • 1-negative
  • Bit13-0: temperature value


sensor_humm_[ID of the sensor]

Only for Only for TAG07/07B/08/08B/08L/09 sensor

Humidity value from the sensor. If value = 0xFF (255 in dec), then no humidity

%
sensor_temp_[ID of the sensor]

Only for TAG07/07B/08/08B/08L/09 sensor

Temperature value from the sensor

C
sensor_rssi_[ID of the sensor]

Signal strength of the sensor

dB
sensor_tm_[ID of the sensor]

Sensor time

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone