Localizador GPS Water World WE930 | Integrado con Wialon

Características Water World WE930:

Soportado en Wialon:

Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de Water World WE930 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	Water World WE930
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Water World WE930 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22893

En el centro de servicio Wialon se utilizan 2 unidades Water World WE930 — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
iccid	iccid number
pwr_ext	Voltage level
status_trig_time1	Report status: Trigger time
sensor_percent	Fuel level in percent
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
imsi	imsi number
sats	Number of satellites
lac	Location Area Code
sequence_num	Sequence Number
encoding	0X01: UTF-8 0x02: ASCII;
battery	Fuel level battery value
boot_reason	Boot Reason
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
rssi	LBS Main Cell Tower, rssi
status_reg_content	Report status: Trigger content
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
gsm_signal_csq	GSM Signal CSQ
battery_vol	Battery Voltage
acc	ACC Status. ACC low: 0, ACC high: 1
temp	Fuel temperature
pwr_int	Battery voltage(mV)
time	Time stamp
imei	imei number
mnc	Mobile Network Code
gps_time_status	GPS is Real Time or Reupload
mileage	Mileage statistics
hdop	HDOP
mcc	Mobile Country Code
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
visible_sats	Visible satellites
odometer	Odometer
server_flag	It refers to the data to send (by the coding format);
gsm	GSM signal strength degree
cell_id	Cell Tower ID
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
door	Door status
content	the command response content

Nombre del parámetro

Descripción

Unidades de medida

iccid

iccid number

pwr_ext

Voltage level

status_trig_time1

Report status: Trigger time

sensor_percent

Fuel level in percent

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

imsi

imsi number

sats

Number of satellites

lac

Location Area Code

sequence_num

Sequence Number

encoding

0X01: UTF-8
0x02: ASCII;

battery

Fuel level battery value

boot_reason

Boot Reason

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

rssi

LBS Main Cell Tower, rssi

status_reg_content

Report status: Trigger content

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

gsm_signal_csq

GSM Signal CSQ

battery_vol

Battery Voltage

acc

ACC Status. ACC low: 0, ACC high: 1

temp

Fuel temperature

pwr_int

Battery voltage(mV)

time

Time stamp

imei

imei number

mnc

Mobile Network Code

gps_time_status

GPS is Real Time or Reupload

mileage

Mileage statistics

hdop

HDOP

mcc

Mobile Country Code

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

visible_sats

Visible satellites

odometer

Odometer

server_flag

It refers to the data to send (by the coding format);

gsm

GSM signal strength degree

cell_id

Cell Tower ID

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

door

Door status

content

the command response content

Wialon: una plataforma para todas sus necesidades

Water World WE930

Otros dispositivos del fabricante

Haga crecer su negocio con nosotros

Conviértase en socio de Wialon

Busque a un proveedor local de Wialon