Cantidad de unidades
Para que el sistema de rastreo Wialon identifique los datos de Sascar en el diálogo de configuración de la unidad, indique los siguientes datos :
| Tipo de dispositivo: | Sascar |
| ID único: | custom |
En el centro de servicio Wialon se utilizan 4 unidades Sascar — es 0% de la cantidad total de dispositivos Protocolo de repetidor conectados.
La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:
| Nombre del parámetro | Descripción | Unidades de medida |
|---|---|---|
| ign | Ignition status: |
|
| hourmeter | Current vehicle hourmeter | min |
| odometer | Current vehicle odometer | km |
| pwr_int | Battery voltage value | V |
| outputN | Status of the device installed at output N. Returns 0 (zero) if there is no device installed or the device code installed with a positive value (active device) or negative (device inactive). | |
| inputN | Status of the device installed on input N. Returns 0 (zero) if there is no device installed or the code of the device installed with a positive (active device) or negative (inactive device) value. | |
| memory | Informs the type of package: |
|
| reference_id | Reference point identification | |
| block | Informs if the vehicle is blocked or not: |
|
| gps_valid | Signal status: |
|
| uf | Federation unity | |
| city | City | |
| street | Address | |
| landmark_name | Name of the nearest landmark | |
| angle_ref | Angle with respect to reference point | |
| dist_ref | Distance in meters from the nearest reference point | |
| rpm | RPM data (Available for vehicles with multi-sensor) | |
| temperatureN | Temperature sensor data N | |
| entry_point | Informs if the vehicle entered a point on the vehicle: |
|
| exit_point | Informs if the vehicle left at a point on the vehicle: |
|
| macro_code | Macro code | |
| message_content | Message content, separated by underline | |
| message_text | Message text |
|
| keyboard_type | Identification of the keyboard type, with possible values: |
|
| jamming | Reports the occurrence of a jamming event by the equipment, where: |
|
| event_code | Code of the actuator that generated the event, whose value can be positive indicating that it was activated or negative indicating that it was deactivated. | |
| is_sat | Informs the origin of the package: 0 - GPRS 1 - SATELITAL |
|
| driver_id | Driver ID |
