| autocar |
Vehicle number |
|
| autono |
Device number |
|
| carnum |
Device plate number |
|
| cid |
Customer identifier |
|
| cname |
Customer name |
|
| devclass |
Device class:
0: DVR
1: IPC
2: NVR
3: MIPC
4: MDVR
|
|
| devname |
Device name |
|
| eid |
Wifi's essid |
|
| gps_quality |
Possible values:
0: GPS data are reliable and effective
1: data are not necessarily reliable, this situation usually occurs when the
number of tracking satellites is insufficient
2: device has no GPS module.
|
|
| lineno |
Line number |
|
| mode |
Link mode:
0: direct mode
1: transmit mode
|
|
| net |
Registered network type:
0: wired network
1: wifi network
2: 3G/4G network
|
|
| pro |
Current protocol version number
|
|
| uname |
Driver name |
|
| uno |
Driver number |
|
| spi_s_alarm |
Alarm status |
|
| spi_s_g3 |
3G Status:
0: module does not exist
1: No SIM card
2: No module and No SIM card
3: module exists and SIM card exists
|
|
| spi_s_g3s |
Signal strength of the 3G network. Range: 0-5.
0: no signal or no connection
5: The best signal
|
|
| spi_s_g4 |
4G status:
0: module does not exist
1: No SIM card
2: No module and No SIM card
3: module exists and SIM card exists
|
|
| spi_s_4gs |
Signal strength of the 4G network. Range: 0-5.
0: no signal or no connection
5: The best signal
|
|
| spi_s_s |
Ground speed |
|
| spi_s_stc |
Total number of the storage device |
|
| spi_s_su |
Speed unit:
0: KM/H
1: MI/H
|
|
| spi_s_sw |
Key ignition status:
0: Disable
1: Enable
|
|
| spi_s_tc |
Temperature indoors
|
|
| spi_s_td |
Device temperature |
|
| spi_s_tm |
Total mileage |
km |
| spi_s_v |
Voltage |
V |
| spi_s_w |
WIFI status:
0: module does not exist
1: module exists
|
|
| spi_s_ws |
Signal strength of WIFI network. Range: 0-5.
0: no signal or no connection
5: the best signal
|
|
| spi_s_sinfo_ls |
Free capacity |
|
| spi_s_sinfo_o |
Storage media type:
0: Internal (default)
1: External
|
|
| spi_s_sinfo_s |
Storage device status:
0: normal
1: malfunction
|
|
| spi_s_sinfo_t |
Storage media type:
0: HDD
1: USB
2: SD card
|
|
| spi_s_sinfo_ts |
Total capacity |
|
| spi_m |
Indicates that the active message
contains GPS or state; bit reprensent.
Valid when bit is 1;
Bit0: GPS;
Bit1: Device status
BIT2: oil volume
|
|
| spi_real |
If it does not exist, means real-time
upload:
0: means real-time upload;
1: means replenishment
|
|
| ign |
Ignition:
0 - ignition off
1 - ignition on
|
|
| pulses |
Number of pulses |
|
| ioN_name |
The name of IO sensor.
N - IO number
|
|
| ioN_nser |
IO abbreviation.
N - IO number
|
|
| ioN_s |
IO status (N - IO number):
0 - low level
1 - high level
2 - open circuit
3 - Short circuit
|
|
| ioN_u |
IO usage (N - IO number):
0 - no usage
1 - emergency alarm
2 - call
3 - neutral
4 - air conditioning
5 - pressure table
6 - over height
7 - green cover
8 - front door
9 - front door open
11 - middle door 1
12 - middle door 1 open
13 - middle door 1 off
14 - back door 1
15 - back door 1 open
16 - back door 1 off
17 - low beam light
18 - high beam light
19 - right turn
20 - left turn
21 - brake
22 - security commitment
|
|
| en |
Real-time position monitoring status:
0 - disabled
1 - enabled
|
|
| mon_mode |
Real-time location monitoring methods:
1 - by distance interval
2 - by time interval
3 - by distance and time intervals
|
|
| num |
Upload frequency ranging from 0 to 65535.
Upload automatically stops after reaching the count.
0 or when the field is empty there is no limit to the number of times.
|
|
| sep |
Distance interval.
Automatic vehicle location reporting cycle distance, ranging from 5 to 65535.
10 m units. Such as '50' represent each with 500 meters to take the initiative to report a location information.
|
10 meters |
| tm |
Time Interval.
Automatic vehicle location reporting time period, ranging from 5 to 65535. In seconds. Such as '300' for every 300 seconds to take the initiative to report a location information.
|
second |
| cs |
clear sensor: to set passager counting to 0
0:No
1:Yes
(Passenger Flow Count)
|
0,1 |
| upp |
The number of people get on the vehicle
(Passenger Flow Count)
|
|
| downp |
The number of people get off the vehicle
(Passenger Flow Count)
|
|
| name |
current stop name
(Passenger Flow Count)
|
|
| time_open |
Door opening time
(Passenger Flow Count)
|
|
| time_close |
time when door got closed
(Passenger Flow Count)
|
|
| alarmcount |
The number of times the same alarm was sent.
(Alarm Info)
|
|
| alarminfo |
Alarm name
(Alarm Info)
|
|
| alarmuid |
Indicates whether this alarm is the first alarm or the same alarm repeated.
(Alarm Info)
|
|
| channel |
Channel 32 bit mask. Each bit indicates corresponding channel state: 0 - invalid, 1 - valid.
(Alarm Info)
|
|
| channelmask |
Channel alarm 32 bit mask. Each bit indicates corresponding channel alarm state: 0 - alarm off, 1 - alarm on.
(Alarm Info)
|
|
| cmdtype |
0: Release alarm
1: start the alarm
2: Pre alarm
(Alarm Info)
|
|
| alarminfo_l |
Language:
0: Simplified Chinese
1: English
2: Korean
3: the Italian language
4: German
5: Thai
6: Turkey
7: Portugal
8: Spain
9: Romania
10: Greece
11: French
12: Russian
13: Dutch
14: Hebrew
15: Chinese Traditional
(Alarm Info)
|
|
| alarmtype |
Alarm type:
0: Video loss alarm
1: Camera covered alarm
2: Motion detection alarm
3: storage abnormal alarm
4: User-defined alarm
5:sentries inspection alarm
6:Violation detection alarm
7:Emergency alarm
8: Speed alarm
9: Low voltage alarm
16 Internal use
17 get in/out of fence alarm
18 acc alarm
19 The peripherals are
dropped
20 stop announcement
21 GPS Antenna
22 day and night switch
23 prohibit driving
32 serial alarm
33 Fatigue alarm
34 time-out parking alarm
35 gesture alarm
36 green driving alarm event
37 illegal ignition alarm
38 illegal shutdown alarm
39 Custom External Input Alarm
40 thinking LKJ
41 TAX3 item alarm
42 oil alarm
43 bus lane occupation alarm
44 forgotten alarm
45 special customer fault alarm
46 temperature abnormal alarm
47 temperature change abnormal alarm
48 smoke alarm
49 gbox alarm
50 license plate recognition alarm
51speed alarm
52 wireless signal abnormal alarm
53 Arming alarm
54 phone-call alarm
55 GPS fault alarm
56 DSM alarm
57 fire box alarm
|
|
| run |
The number of restarts
(Alarm Info)
|
|
| ser |
Abbreviation for alarm,1-32
(Alarm Info)
|
|
| sno |
1 ~ 255. Custom alarms are numbered by the device to distinguish between multiple custom alarms. The number must not be repeated.
(Alarm Info)
|
|
| triggertype |
Trigger type:
0: Manual
1: automatic
(Alarm Info)
|
|
| lch_N |
Channel number alarm:
N is channel number for which alarm is valid. Parameter is a bit mask. Every bit from 0 to 31 is set to 1 if corresponding channel is bounded to this alarm
(Alarm Info)
|
|
| push |
Channel number alarm:
Bit mask, BIT0-BIT31 indicates channel 1-channel 32, 1 indicates that the channel's alarm needs to push, otherwise no push)
Other alarms: 0 - don't push, 1 - push
(Alarm Info)
|
|
| storagetype |
0 - hard drive
1-U disk
2-SD card
(Alarm Info)
|
|
| storageindex |
1-32 (logical number of memory)
(Alarm Info)
|
|
| errorcode |
1-32, Memory abnormity serial number
(Alarm Info)
|
|
| errordescription |
Memory abnormity descriptor
(Alarm Info)
|
|
| atype |
Speed alarm category.
0: Standard low speed alarm
1: Standard high speed alarm
2: overspeed Pre alarm
3: real-time high-speed alarm
4: emergency deceleration alarm
5: speed recovery normal alarm
6: parking
7: threshold alarm
8: start alarm (speed from 0 to non-0)
(Alarm Info)
|
|
| csp |
Speed Alarm: current speed value
(Alarm Info)
|
|
| minsp |
Speed Alarm: lowest speed value
(Alarm Info)
|
|
| maxsp |
Speed Alarm: highest speed value
(Alarm Info)
|
|
| v |
Voltage alarm: current voltage
(Alarm Info)
|
|
| datsrc |
Alarm Source: CANINFO(OBD); 6-AXIS;TIREPRESS; TRUCKLOAD;
(Alarm Info)
|
|
| acc_direction |
Acceleration direction:
0: X direction;
1: Y direction;
2: Z direction;
3: collision
4: rollover;
5: bumps
6: rapid acceleration
7: rapid deceleration
8:G4
9:G5
10:harsh left turn
11:harsh right turn
(Alarm Info, Acceleration Alarm)
|
|
| st |
when alarmtype = 56 (DSM alarm):
Sub-alarm type
- Fatigue driving
- No driver
- Phone call alarm
- Smoking
- Distraction
- LDW
- FCW
- Speed sign violation -
not implemented.
- *reserved*
- Following too close.
- Yawning
- Pedestrian collision
warning
-
Aisle overcrowding
-
Passengers on board outside the station
-
The full line change lanes
-
Watching and playing mobile phone
-
Seat belts not fastened
-
Driver certification failure
-
Blind spot detection (right side)
-
Forward collision warning (Virtual bumper)
-
Two Hands break away from the wheel
-
One hand break away from the wheel
-
Glasses blocking
-
Blind spot detection (left side)
-
Passengers interfere with the driver's drivering
(Alarm Info, DSM alarm)
|
|
| acc_x |
Acceleration along x-axis
(Alarm Info, Acceleration Alarm)
|
|
| acc_y |
Acceleration along y-axis
(Alarm Info, Acceleration Alarm)
|
|
| acc_z |
Acceleration along z-axis
(Alarm Info, Acceleration Alarm)
|
|
| acc_v |
G4 or G5 Acceleration value
(Alarm Info, Acceleration Alarm)
|
|
| accaz |
Six-axis angle data, when the three axes are valid, fill in 0, z direction
|
|
| accay |
Six-axis angle data, when the three axes are valid, fill in 0, y direction
|
|
| accax |
Six-axis angle data, when the three axes are valid, fill in 0, x direction
|
|
| accz |
Three/ Six-axis data acceleration, z direction
|
|
| accy |
Three/ Six-axis data acceleration, y direction
|
|
| accx |
Three/ Six-axis acceleration data, x direction
|
|
| iolevel |
IO Trigger mode within IO level mode, bit value 0 indicates low level trigger, 1 indicates high level trigger
|
|
| iomode |
The IO trigger mode is represented by bits. A bit value of 0 indicates level triggering and a 1 indicates pulse trigger
|
|
| iostate |
Io enable is expressed in bits. A bit value of 0 means close, 1 means open
|
|
| accstate |
acc key status, 0 means closed, 1 means open
|
|
| ioenable |
Io enable is expressed in bits. A bit value of 0 means close, 1 means open
|
|
| obd_engine_temp |
Engine temperature
|
°C |
| obd_water_temp |
Water temperature
|
°C |
| obd_short_fuel |
The amount of oil
|
L |
| obd_total_fuel |
The total fuel consumption
|
L |
| obd_engine_rpm |
Engine speed
|
RPM |
| obd_short_mileage |
Mileage
|
KM |
| obd_total_mileage |
Total mileage
|
KM |
| obd_speed |
Vehicle speed
|
KM/H |
