EPCOM XMR404HD

EPCOM XMR404HD
Fabricante: EPCOM
Discusión en el foro

Cantidad de unidades

395
En línea
1180
Total
Características EPCOM XMR404HD:
  • Caja negra
Soportado en Wialon:
  • Conexión con cámara
  • Guardado de vídeos de eventos
  • Gestión remota vía GPRS
  • Sensores Digitales
  • Transmisión en directo
  • Guardado manual de vídeos
  • Reproducción de grabaciones
  • Botón de alarma
  • Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de EPCOM XMR404HD en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: EPCOM XMR404HD
ID único: serial

Indique los siguientes parámetros en el programa de configuración o en la configuración EPCOM XMR404HD para utilizarlos en Wialon Hosting :

Puerto del servidor: 21629

En el centro de servicio Wialon se utilizan 1180 unidades EPCOM XMR404HD — es 3.85% de la cantidad total de dispositivos Video monitoring conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
autocar Vehicle number
autono Device number
carnum Device plate number
cid Customer identifier
cname Customer name
devclass

Device class:
0: DVR
1: IPC
2: NVR
3: MIPC
4: MDVR

devname Device name
eid Wifi's essid
gps_quality

Possible values:
0: GPS data are reliable and effective
1: data are not necessarily reliable, this situation usually occurs when the
number of tracking satellites is insufficient
2: device has no GPS module.

lineno Line number
mode

Link mode:
0: direct mode
1: transmit mode

net

Registered network type:
0: wired network
1: wifi network
2: 3G/4G network

pro

Current protocol version number

uname Driver name
uno Driver number
spi_s_alarm Alarm status
spi_s_g3

3G Status:
0: module does not exist
1: No SIM card
2: No module and No SIM card
3: module exists and SIM card exists

spi_s_g3s

Signal strength of the 3G network. Range: 0-5.
0: no signal or no connection
5: The best signal

spi_s_g4

4G status:
0: module does not exist
1: No SIM card
2: No module and No SIM card
3: module exists and SIM card exists

spi_s_4gs

Signal strength of the 4G network. Range: 0-5.
0: no signal or no connection
5: The best signal

spi_s_s Ground speed
spi_s_stc Total number of the storage device
spi_s_su

Speed unit:
0: KM/H
1: MI/H

spi_s_sw

Key ignition status:
0: Disable
1: Enable

spi_s_tc

Temperature indoors

spi_s_td Device temperature
spi_s_tm Total mileage km
spi_s_v Voltage V
spi_s_w

WIFI status:
0: module does not exist
1: module exists

spi_s_ws

Signal strength of WIFI network. Range: 0-5.
0: no signal or no connection
5: the best signal

spi_s_sinfo_ls Free capacity
spi_s_sinfo_o

Storage media type:
0: Internal (default)
1: External

spi_s_sinfo_s

Storage device status:
0: normal
1: malfunction

spi_s_sinfo_t

Storage media type:
0: HDD
1: USB
2: SD card

spi_s_sinfo_ts Total capacity
spi_m

Indicates that the active message
contains GPS or state; bit reprensent.
Valid when bit is 1;
Bit0: GPS;
Bit1: Device status
BIT2: oil volume

spi_real

If it does not exist, means real-time
upload:
0: means real-time upload;
1: means replenishment

ign

Ignition:
0 - ignition off
1 - ignition on

pulses Number of pulses
ioN_name

The name of IO sensor.
N - IO number

ioN_nser

IO abbreviation.
N - IO number

ioN_s

IO status (N - IO number):
0 - low level
1 - high level
2 - open circuit
3 - Short circuit

ioN_u

IO usage (N - IO number):
0 - no usage
1 - emergency alarm
2 - call
3 - neutral
4 - air conditioning
5 - pressure table
6 - over height
7 - green cover
8 - front door
9 - front door open
11 - middle door 1
12 - middle door 1 open
13 - middle door 1 off
14 - back door 1
15 - back door 1 open
16 - back door 1 off
17 - low beam light
18 - high beam light
19 - right turn
20 - left turn
21 - brake
22 - security commitment

en

Real-time position monitoring status:
0 - disabled
1 - enabled

mon_mode

Real-time location monitoring methods:
1 - by distance interval
2 - by time interval
3 - by distance and time intervals

num

Upload frequency ranging from 0 to 65535.
Upload automatically stops after reaching the count.
0 or when the field is empty there is no limit to the number of times.

sep

Distance interval.
Automatic vehicle location reporting cycle distance, ranging from 5 to 65535.
10 m units. Such as '50' represent each with 500 meters to take the initiative to report a location information.

10 meters
tm

Time Interval.
Automatic vehicle location reporting time period, ranging from 5 to 65535. In seconds. Such as '300' for every 300 seconds to take the initiative to report a location information.

second
cs

clear sensor: to set passager counting to 0
0:No
1:Yes

(Passenger Flow Count)

0,1
upp

The number of people get on the vehicle

(Passenger Flow Count)

downp

The number of people get off the vehicle

(Passenger Flow Count)

name

current stop name

(Passenger Flow Count)

time_open

Door opening time

(Passenger Flow Count)

time_close

time when door got closed

(Passenger Flow Count)

alarmcount

The number of times the same alarm was sent.

(Alarm Info)

alarminfo

Alarm name

(Alarm Info)

alarmuid

Indicates whether this alarm is the first alarm or the same alarm repeated.

(Alarm Info)

channel

Channel 32 bit mask. Each bit indicates corresponding channel state: 0 - invalid, 1 - valid.

(Alarm Info)

channelmask

Channel alarm 32 bit mask. Each bit indicates corresponding channel alarm state: 0 - alarm off, 1 - alarm on.

(Alarm Info)

cmdtype

0: Release alarm
1: start the alarm
2: Pre alarm

(Alarm Info)

alarminfo_l

Language:
0: Simplified Chinese
1: English
2: Korean
3: the Italian language
4: German
5: Thai
6: Turkey
7: Portugal
8: Spain
9: Romania
10: Greece
11: French
12: Russian
13: Dutch
14: Hebrew
15: Chinese Traditional

(Alarm Info)

alarmtype

Alarm type:

0: Video loss alarm
1: Camera covered alarm
2: Motion detection alarm 
3: storage abnormal alarm 
4: User-defined alarm
5:sentries inspection alarm 
6:Violation detection alarm 
7:Emergency alarm
8: Speed alarm 
9: Low voltage alarm
16 Internal use 
17 get in/out of fence alarm 
18 acc alarm 
19 The peripherals are
dropped 
20 stop announcement
21 GPS Antenna
22 day and night switch
23 prohibit driving
32 serial alarm
33 Fatigue alarm
34 time-out parking alarm 
35 gesture alarm
36 green driving alarm event 
37 illegal ignition alarm
38 illegal shutdown alarm
39 Custom External Input Alarm 
40 thinking LKJ 
41 TAX3 item alarm 
42 oil alarm 
43 bus lane occupation alarm
44 forgotten alarm 
45 special customer fault alarm 
46 temperature abnormal alarm
47 temperature change abnormal alarm
48 smoke alarm
49 gbox alarm 
50 license plate recognition alarm
51speed alarm
52 wireless signal abnormal alarm
53 Arming alarm
54 phone-call alarm
55 GPS fault alarm
56 DSM alarm 
57 fire box alarm

run

The number of restarts

(Alarm Info)

ser

Abbreviation for alarm,1-32

(Alarm Info)

sno

1 ~ 255. Custom alarms are numbered by the device to distinguish between multiple custom alarms. The number must not be repeated.

(Alarm Info)

triggertype

Trigger type:
0: Manual
1: automatic

(Alarm Info)

lch_N

Channel number alarm:
N is channel number for which alarm is valid. Parameter is a bit mask. Every bit from 0 to 31 is set to 1 if corresponding channel is bounded to this alarm

(Alarm Info)

push

Channel number alarm:
Bit mask, BIT0-BIT31 indicates channel 1-channel 32, 1 indicates that the channel's alarm needs to push, otherwise no push)
Other alarms: 0 - don't push, 1 - push

(Alarm Info)

storagetype

0 - hard drive
1-U disk
2-SD card

(Alarm Info)

storageindex

1-32 (logical number of memory)

(Alarm Info)

errorcode

1-32, Memory abnormity serial number

(Alarm Info)

errordescription

Memory abnormity descriptor

(Alarm Info)

atype

Speed alarm category.
0: Standard low speed alarm
1: Standard high speed alarm
2: overspeed Pre alarm
3: real-time high-speed alarm
4: emergency deceleration alarm
5: speed recovery normal alarm
6: parking
7: threshold alarm
8: start alarm (speed from 0 to non-0)

(Alarm Info)

csp

Speed Alarm: current speed value

(Alarm Info)

minsp

Speed Alarm: lowest speed value

(Alarm Info)

maxsp

Speed Alarm: highest speed value

(Alarm Info)

v

Voltage alarm: current voltage

(Alarm Info)

datsrc

Alarm Source: CANINFO(OBD); 6-AXIS;TIREPRESS; TRUCKLOAD;

(Alarm Info)

acc_direction

Acceleration direction:
0: X direction;
1: Y direction;
2: Z direction;
3: collision
4: rollover;
5: bumps
6: rapid acceleration
7: rapid deceleration
8:G4
9:G5
10:harsh left turn
11:harsh right turn
(Alarm Info, Acceleration Alarm)

st

when alarmtype = 56 (DSM alarm):
Sub-alarm type

  1. Fatigue driving
  2. No driver
  3. Phone call alarm
  4. Smoking
  5. Distraction
  6. LDW
  7. FCW
  8. Speed sign violation - not implemented.
  9. *reserved*
  10. Following too close.
  11. Yawning
  12. Pedestrian collision warning
  13. Aisle overcrowding
  14. Passengers on board outside the station
  15. The full line change lanes
  16. Watching and playing mobile phone
  17. Seat belts not fastened
  18. Driver certification failure
  19. Blind spot detection (right side)
  20. Forward collision warning (Virtual bumper)
  21. Two Hands break away from the wheel
  22. One hand break away from the wheel
  23. Glasses blocking
  24. Blind spot detection (left side)
  25. Passengers interfere with the driver's drivering
(Alarm Info, DSM alarm)

acc_x

Acceleration along x-axis

(Alarm Info, Acceleration Alarm)

acc_y

Acceleration along y-axis

(Alarm Info, Acceleration Alarm)

acc_z

Acceleration along z-axis

(Alarm Info, Acceleration Alarm)

acc_v

G4 or G5 Acceleration value

(Alarm Info, Acceleration Alarm)

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre de pila*
Apellido*
Compañía*
Email*
Teléfono