Fuel flow meter Eurosens Delta

Vendor of Fuel flow meter Eurosens Delta is Mechatronics.

Eurosens Delta fuel flow sensors are designed to measure fuel consumption of diesel engines or other consumers in the range from 1 to 500 liters per hour without fuel system modification. Delta flowmeters have a wide range of modifications, (100, 250, 500liters per hour), can have built-in display and different output interfaces.

Eurosens Delta fuel consumption meters are made of hard aluminum alloy of increased hardness with antifriction coating. Temperature sensors are integrated in both measuring chambers. It allows to take into account the difference in fuel temperatures before and after the engine and ensure high measurement accuracy even at idle. It is possible to switch the sensor to the mode of summing the flows of the cameras, which will increase its maximum measured flow rate up to 1000 liters/hour.

Eurosens Delta flowmeters have a warranty period of 3 years without limiting the fuel volume, are certified according to UNECE Regulation No. 10 (E-mark).

Benefits:

• High quality manufacturing of measuring chambers
• Modern measuring circuit based on several Hall sensors that provide immunity to the external magnetic field
• Special built-in automotive connector
• Flow direction detection
• Smart filtering of fuel pulsation excludes check valves and minimizes hydraulic resistance
• Easy maintenance without shipment to a service center

Specifications:

• Connecting thread M14x1, 5
• Max pressure 2.5 MPa
• Power voltage, V 10 – 50
• Reverse polarity protection Yes
• Accuracy ±1%
• Temperature range,°C -40 – +85
• Maximum flow rate in l/h 500
• Output interface pulses, RS232, RS485, K-Line, CAN
• Protection class IP 67