KnightX 100

KnightX 100
Forum de discussion

Nombre des unités

16
En ligne
226
Nombre total
Caractéristiques KnightX 100:
  • 4G/LTE
  • Boîte à mémoire
  • Wi-Fi positioning
Compatible avec Wialon:
  • Communication via TCP
  • Communication via UDP

Afin d'identifier le boîtier KnightX 100 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS: KnightX 100
ID unique: imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration KnightX 100 pour les utiliser dans Wialon Hosting :

Port du serveur: 22502

226 unités KnightX 100 connectées au le centre de données Wialon — Ça fait 0.12% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
ble_#_light_box

Ble light sign bit (# - ble sensor id)

1- light on,

0 - light off

ble_#_light

Ble, Value of light intensity, (# - ble sensor id)

ble_data_code

Ble data code

1 - The BLE tire pressure sensor data code

2 - The BLE SOS data code

3 - The BLE driver identification data code

4 - The BLE Temperature and humidity sensor data code

5 - The BLE door sensor data code

6 - The BLE RELAY data code

7 - The BLE Fuel Level Sensor data code

10 - The FH Analog sensor data code

11 - The MiTag Temperature and humidity sensor data code

12 - The ELA sensor pass-through data code

tps_#_pwr_int

Ble tps battery voltage, # -ble sensor id

tps_#_air_pres

Ble tps air pressure, # - ble sensor id

tps_#_air_temp

Ble tps air temperature, # -ble sensor id

tps_#_status

Ble tps status, # - ble sensor id

ble_tag_id

Ble tag id

ble_#_battery

Ble tag battery voltage, # - ble tag id

ble_#_sos_type

Ble sos data type, # -ble tag id

ble_#_gnss_status

Ble tag gnss status, #- ble tag id

ble_#_driver_ident_type

Ble driver identification type, # - ble tag id

ble_sens_id

Ble sensor id

ble_#_pwr

Ble battery voltage, # - ble sensor id

V
ble_#_pwr_p

Ble battery percantage, # - ble sensor id

ble_#_temp

Ble temperature, # - ble sensor id

ble_#_hmdt

Ble humidity, # - ble sensor id

ble_#_rssi

Ble rssi, # - ble sensor id

dBm
mcu_model

MCU model

mcu_fw_ver

MCU firmware version

modem_ver

Modem version

modem_app

Modem app version

hw_ver

Hardware version

gnss_status

Data and GNSS status (Bits 1-8)

1. Bit8=0, realtime data; Bit8=1, history data

2. Bit7=0, LBS data; Bit7=1, GNSS data

3. Bit6=0, GNSS is in working mode. Bit6=1,GNSS is in sleeping mode

4. Bit5-Bit1, locked satellite count

alarm

Alarm code

acc_z

Acceleration Value

g
acc_y

Acceleration Value

g
acc_x

Acceleration Value

g
battery_percent

Build in Battery Voltage (%)

temp

Device Internal Temperature (℃)

front_light

Front Light Sensor Voltage

V
solar_voltage

Solar Panel Voltage

V
odom

Odometer (Meter)

status

Status (Bits 1-16)

1. Bit16= 1, USB cable connected(with power), Bit16 =0, USB cable disconnected(without power)

2. Bit15~Bit12 show 4 manager phone number set or not. (1=set, 0=not)

4. Bit 11~Bit5, Network signal strength. Range: 0~100

5. Bit4=1, solar panel is charging the battery, Bit4=0, solar panel doesn't charge the battery

6. Bit3=1, ignition on (moving), Bit3=0, ignition off (standstill)

7. Bit2=1 (Xtra Yes), Bit2=0 (Xtra No)

8. Bit1=0, normal timer reporting (TLP1-LF, TLP1-SF & TLP1-P), Bit1=1, smartpower timer reporting (TLP1-LF, TLP1-SF & TLP1-P)

acc_on

Igniton ON Upload Interval(Second)

acc_off

Ignition OFF or Accdet=0 Upload Interval (Second)

angle

Angle Upload Interval (Degree)

distance

Distance Upload Interval (Meter)

heart

Heartbeat (Minute)

settings_status

Current Setting Status Informaiton(1) (Bits 1-8)

1. Bit8: lock SIM card setting status, Bit8=1, locked, Bit8=0, unlocked

2. Bit7: lock device setting status, Bit7=1, locked, Bit7=0, unlocked

3. Bit6: AGPS Ephemeris data download setting status, Bit6=1, enable download, Bit6=0, disable download

4. Bit5:G-sensor setting status, Bit5=1 enable, Bit5=0, disable

5. Bit4: front sensor setting status, Bit4=1, enable, Bit4=0, disable

7. Bit2: open case alarm setting status,Bit2=1, enable, Bit2=0, disable

8.Bit1: device internal temperature reading and uploading setting status, Bit1=1, enable, Bit1=0, disable

network_operator

Network Operators Name

access_name Access Technology Name
band_name

Band Name

imsi

SIM Card IMSI

iccid ICCID
ign

ACC status, 0 - ACC ON, 1 - ACC OFF

mnc

Mobile Network Code

mcc

Mobile Country Code

lac Location Area Code
cell_id

Cell Tower ID

network_signal

Network signal strength. Range: 0~100

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1
Étape 2
Étape 3
Prénom*
Nom*
Entreprise*
Email*
Téléphone