DATECS

Fabricant: DATECS

Forum de discussion

Nombre des unités

En ligne

133

Nombre total

Information
Paramètres

Afin d'identifier le boîtier DATECS les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	DATECS
ID unique:	serial

133 unités DATECS connectées au le centre de données Wialon — Ça fait 0.01% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre

Description

Unités

ib_serial

iButton serial number (16 hex symbols)

ib_alarm_control_mask

iButton alarm control mask. Define frequency for RTC alarm.
15 - Alarm once per second;
14 - Alarm when seconds match (once per minute);
12 - Alarm when minutes and seconds match (once every hour);
8 - Alarm when hours, minutes, and seconds match (once every day);
0 - Alarm when day, hours, minutes, and seconds match (once every week).
(from iButton register page.)

ib_alarm_time

time for RTC alarm. RTC alarm will happen every second/minute/day/week (according to ib_alarm_control_mask)
(from iButton register page.)

HH:MM:SS

ib_temp_alarm_treshold_low

Low temperature threshold, the device generates alarm when this temperature is reached.
(from iButton register page.)

ib_temp_alarm_treshold_high

High temperature threshold, the device generates alarm when this temperature is reached.
(from iButton register page.)

ib_sample_rate

how many seconds the temperature samplings are apart from each other during a mission
(from iButton register page.)

seconds

ib_control

Bit 7: Enable Oscillator (EOSC)
Bit 6: Memory Clear Enable (EMCLR)
Bit 4: Enable Mission (EM)
Bit 3: Rollover Enable/Disable (RO)
Bit 2: Temperature Low Alarm Search (TLS)
Bit 1: Temperature High Alarm Search (THS)
Bit 0: Timer Alarm Search (TAS)
(from iButton register page.)

bit flag

ib_rollover

3rd bit of ib_control. Rollover Enable/Disable.
(from iButton register page.)

0,1

ib_mission_start_delay

how many minutes the device waits before starting the logging process
(from iButton register page.)

minutes

ib_status

Status Register.
Bit 7: Temperature Core Busy (TCB)
Bit 6: Memory Cleared (MEMCLR)
Bit 5: Mission in Progress (MIP)
BIT 4: Sample in Progress (SIP)
Bit 2: Temperature Low Flag (TLF)
Bit 1: Temperature High Flag (THF)
Bit 0: Timer Alarm Flag (TAF)
(from iButton register page.)

bit flag

ib_temp

iButton temperature measurement
(from iButton register page.)

ib_mission_start

Time when the mission starts (unix timestamp format).
(from iButton register page.)

ib_mission_samples_counter

how many temperature measurements have taken place during the current mission in progress
(from iButton register page.)

ib_device_samples_counter

how many temperature measurements have taken place since the device was assembled at the factory
(from iButton register page.)

ib_alarm_duration

Alarm duration.
(from Alarm Timestamps page.)

minutes

ib_is_alarm_high

0 : high alarm temperature;
1 : low alarm temperature.
(from Alarm Timestamps page.)

0,1

ib_hist_XXXX

Temperature histogram value.
XXXX is histogram binary address, from 0800 to 087C.
0800 corresponds to -38.5 and lower temperature
0802 corresponds to -38.0 .. -36.5
0804 corresponds to -36.0 .. -34.5
...
087A corresponds to +82.0 .. +83.5
087C corresponds to +84.0 and higher

(from Alarm Timestamps page.)

mileage

Mileage

hdop

HDOP

sat_mode

Sattelite Mode indicator
0 – no fix
1 – Autonomous GNSS Fix
2 – Differential GNSS Fix
3 – Estimated/Dead Reckoning Fix

sat_fix

FS indicator:
0 – invalid
1 – Fix not available
2 – 2D Fix
3 – 3D Fix

is_fixnow

FixNOW indicator:
0 – Continuous mode;
1 – FixNOW mode

is_pedestrian

Pedestrian/Automotive mode indicator:
0 – Automotive;
1 – Pedestrian

ign

Ignition

0,1

fake_ign

“Fake Ignition” flag. If the device detects movement for at least 15 seconds or detects a point farther than MaxGuardDist, it raises this flag. If there is no movement for more than 15 seconds the device clears this flag.

0,1

is_antenna_short_circuit

Antenna short circuit:
0 – antenna OK;
1 – antenna short circuit

0,1

pwr_int

ADC reading for the battery voltage.

log_trigger

Flash write trigger

core_flag

Device status flags and boot up flags (appear only once at device start up).

bit								Meaning
7	6	5	4	3	2	1	0	Meaning
							x	Device reset due to power up occurred.
						x		Device reset due to watchdog reset.
					x			Real Time Clock reset
				x				RAM reset
			x					Flash reset
		x						Firmware update
	x							SD/MMC card present
x								SD/MMC card error

gpo_flag

State of the digital outputs:

bit								Meaning
7	6	5	4	3	2	1	0	Meaning
							x	Ignition
						x		Power supply source; 0 – Internal battery; 1 – External power source
					x			Reserved
				x				Reserved
			x					GPO0 state; 0 – off; 1 – on
		x						GPO0 fault; 0 – no fault; 1 – fault (short circuit)
	x							GPO1 state; 0 – off; 1 – on
x								GPO1 fault; 0 – no fault; 1 – fault (short circuit)

gsm_activity

Current GSM activity:

bit								Meaning
7	6	5	4	3	2	1	0	Meaning
							x	GSM network registration; 0 – not registered; 1 – registered
						x		GPRS attach attempt
					x			Registration within the GPRS network; 0 – not registered; 1 – registered
				x				Call received
			x					Attempt to connect to the ISP using GSM data (CSD)
		x						Attempt to connect to the ISP via GPRS
	x							Attempt to upload a file to the FTP server
x								Attempt to download a file from the FTP server

gsm_resp

Indicates that some of the following messages is received from the GSM:
0 – OK (no error)
1 – ERROR
3 – NO CARRIER
4 – CONNECT
7 – BUSY
8 – NO ANSWER
9 - SHUTDOWN

gsm_cme_err

CME error messages:
1025 - Ok_Info_DataBegin
1028 - Ok_Info_WaitingForData
3074 - Ok_Info_SocketClosed
3077 - Ok_Info_Ppp
3086 - Ok_Info_GprsActivation

driving_reason

bit
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
										x	x	x	x	x	x	Driving reason: 0 – Work trip 1 – Private trip
									x							0 – Default driving reason 1- Reason selected by user
								x								N/A
							x									Driving reason info received from DIM-5000
x	x	x	x	x	x	x										N/A

mifare_state

bit
15	14	13	12	11	10	9	8	7	6	5	4	3	2	1	0
															x	0 – Card unlog/not logged 1 – Card log to the system
	x	x	x	x	x	x	x	x	x	x	x	x	x	x		N/A
x																0 – MiFare card info never received from DIM-5000 1 – there is MiFare card status message from DIM-5000

mifare_id

MiFare card number

f02_GG_NN

Parameter from configuration frame,
GG - Parameter Group,
NN - Parameter Number

sf02_GG_NN

Status byte for parameters in reply frames.

bit								Value	Meaning
7	6	5	4	3	2	1	0	Value	Meaning
-	0	0	0	0	0	0	0	0	No Error
	0	0	0	0	0	0	1	1	Unsupported parameter group number
	0	0	0	0	0	1	0	2	Unsupported parameter number
	0	0	0	0	0	1	1	3	Value out of range / try to set a read-only parameter
	0	0	0	0	1	0	0	4	Value not set, i.e. the data field value is meaningless
	0	0	0	0	1	0	1	5	Unfinished command is present in the frame
	0	0	0	0	1	1	0	6	An error occurred while writing the settings into the flash (Command reply frame).
	0	0	0	0	1	1	1	7	Command forbidden in *.dcc file or SMS.
	0	0	0	1	0	0	0	8	Device busy (i.e. try to get SD card data start index, while device is reading or writing data).
	0	0	0	1	0	0	1	9	Error accessing a module (i.e. try to get SD card data start index, but there’s no SD card or SD card is damaged)
	0	0	0	1	0	1	0	10	This error is returned by Start Firmware Download command. The device cannot process the command, because another call is being processed at the moment.
	0	0	0	1	0	1	1	11	This error is returned by Start Firmware Download command. The command is sent via SMS, but the sender phone number is not authorized to perform firmware download.
x									This indicates that the last parameter sequence in the frame is unfinished. i.e. the device expected more data, but the frame had ended.

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Rejoignez notre association mondiale d’experts en télématique. Aidez vos clients à transformer leurs entreprises avec des solutions IdO connectées et l’analytique avancée.

Demandez Wialon dans votre région

Obtenez une solution télématique de nos partenaires fiables et ameliorez les opérations de votre flotte, réduisez les coûts de maintenance et gérez votre consommation de carburant.

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1

Étape 2

Étape 3

Prénom*

Nom*

Entreprise*

Email*

Téléphone

J'accepte que mes données personnelles soient traitées
Politique de confidentialité

‹ › ×

Produits

Produits de niche pour des tâches spécifiques

DATECS

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon