Traceur GPS EG02 | Intégré à Wialon

Caractéristiques EG02:

Boîte à mémoire

Compatible avec Wialon:

Modification du paramètre "speed"

Afin d'identifier le boîtier EG02 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	EG02
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration EG02 pour les utiliser dans Wialon Hosting :

Port du serveur:

22051

3 unités EG02 connectées au le centre de données Wialon — Ça fait 0% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
sats	Number of satellites
cell_id	Cell Tower ID
pwr_int	Battery voltage(mV)
mcc	Mobile Country Code
gps_time_status	GPS is Real Time or Reupload
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
content	the command response content
battery	Fuel level battery value
hdop	HDOP
encoding	0X01: UTF-8 0x02: ASCII;
server_flag	It refers to the data to send (by the coding format);
door	Door status
imei	imei number
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
gsm_signal_csq	GSM Signal CSQ
odometer	Odometer
iccid	iccid number
pwr_ext	Voltage level
rssi	LBS Main Cell Tower, rssi
gsm	GSM signal strength degree
visible_sats	Visible satellites
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
time	Time stamp
boot_reason	Boot Reason
mileage	Mileage statistics
status_reg_content	Report status: Trigger content
acc	ACC Status. ACC low: 0, ACC high: 1
imsi	imsi number
sensor_percent	Fuel level in percent
sequence_num	Sequence Number
battery_vol	Battery Voltage
temp	Fuel temperature
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
status_trig_time1	Report status: Trigger time
mnc	Mobile Network Code
lac	Location Area Code

Nom du paramètre

Description

Unités

sats

Number of satellites

cell_id

Cell Tower ID

pwr_int

Battery voltage(mV)

mcc

Mobile Country Code

gps_time_status

GPS is Real Time or Reupload

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

content

the command response content

battery

Fuel level battery value

hdop

HDOP

encoding

0X01: UTF-8
0x02: ASCII;

server_flag

It refers to the data to send (by the coding format);

door

Door status

imei

imei number

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

gsm_signal_csq

GSM Signal CSQ

odometer

Odometer

iccid

iccid number

pwr_ext

Voltage level

rssi

LBS Main Cell Tower, rssi

gsm

GSM signal strength degree

visible_sats

Visible satellites

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

time

Time stamp

boot_reason

Boot Reason

mileage

Mileage statistics

status_reg_content

Report status: Trigger content

acc

ACC Status. ACC low: 0, ACC high: 1

imsi

imsi number

sensor_percent

Fuel level in percent

sequence_num

Sequence Number

battery_vol

Battery Voltage

temp

Fuel temperature

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

status_trig_time1

Report status: Trigger time

mnc

Mobile Network Code

lac

Location Area Code

Wialon : une plateforme unique pour des besoins variés

EG02

Plus de boîtiers GPS de ce fabricant

Développez votre activité avec nous

Devenez partenaire de Wialon

Trouvez un fournisseur Wialon à proximité