VL101G

VL101G
Forum de discussion

Nombre des unités

0
En ligne
1
Nombre total
Caractéristiques VL101G:
  • 3G
  • 4G/LTE
  • Boîte à mémoire
  • Compatibilité avec GLONASS
  • Wi-Fi positioning
Compatible avec Wialon:
  • Accéléromètre
  • Capteurs analogiques (ADC)
  • Gestion à distance via GPRS
  • LBS
  • Gestion à distance via SMS
  • Communication via TCP

Afin d'identifier le boîtier VL101G les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS: VL101G
ID unique: imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration VL101G pour les utiliser dans Wialon Hosting :

Port du serveur: 22695

1 unités VL101G connectées au le centre de données Wialon — Ça fait 0% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre Description Unités
pwr_ext Voltage level V
gsm GSM Signal Strength
imei imei number
imsi imsi number
iccid iccid number
time Time stamp
sats Number of satellites
visible_sats Visible satellites
sat#_signal_strength Satellites signal strength, where # - number
mcc LBS Main Cell Tower, mcc
mnc LBS Main Cell Tower, mnc
lac LBS Main Cell Tower, lac
cell_id LBS Main Cell Tower, cell_id
rssi LBS Main Cell Tower, rssi
lac# LBS Auxiliary Cell Tower, lac, where # - number
cell_id# LBS Auxiliary Cell Tower, cell_idm, where # - number
rssi# LBS Auxiliary Cell Tower, rssi, where # - number
gsm_signal_csq GSM Signal CSQ
battery_vol Battery Voltage
hdop HDOP
sequence_num Sequence Number
inputs Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
boot_reason

Boot Reason


mileage Mileage statistics
real_time_mode# Real time current mode, where # - number
static_parameter_mode# Static mode parameter, where # - number
is_geofence_rectangular# Circular o rectangular, 0 is circular, 1 is rectangular, where # - id
is_geofence_exit# Enter or Exit geofence, 1 is enter, 2 is exit, where # - id
status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

status_trig_time1 Report status: Trigger time
status_reg_content Report status: Trigger content
gps_time_status GPS is Real Time or Reupload
alm1 Alarm Bit 1
alm2 Alarm Bit 2
alm3 Alarm Bit 3
sta1 Status Bit 1
dyd Fuel/Electricity Cutoff Status
sos_num# SOS number, where # - number
center_num Centre number
fence GeoFence
door Door status
cit Content of Terminal Information (heartbeat msg)
alarm

0x00: Normal

0x01: SOS alert

0x02: Power cut alert

0x03: Vibrating alert

0x04: Entered fence alert

0x05: Left fence alert

0x06: Speed alert

0x09: Tow/theft alert

0x0A: Entered GPS blind spot alert

0x0B: Left GPS blind spot alert

0x0C: Powered on alert

0x0D: GPS first fix alert

0x0E: Low external battery alert

0x0F: External battery low voltage protection alert

0x10: SIM changed alert

0x11: Powered off alert

0x12: Airplane mode on following external battery low voltage protection

0x13: Tamper alert

0x14: Door alert

0x15: Powered off due to low battery

0x16: Sound-control alert

0x17: Rogue base station detected alert

0x18: Cover removed alert

0x19: Low internal battery alert

0x20: Entered deep sleep mode alert

0x21: Reserved

0x22: Reserved

0x23: Fall alert

0x29: Harsh acceleration

0x2A: Sharp left cornering alert

0x2B: Sharp right cornering alert

0x2C: Collision alert

0x30: Harsh braking

0x32: Device unplugged alert

0x53:Oil Steal alarm

0x71:Refuel notice

0x77:ADC1 High voltage alarm

0x78:ADC1 Low voltage alarm

0xC5 Engine is already turned on

0xC6 Engine is already turned off

0xC7 Driver has been driving extendedly

0xC8 Extended driving of driver is already known

0XE6 INPUT1 is activated

0XE7 INPUT1 is deactivated

0XE8 INPUT2 is activated

0XE9 INPUT2 is deactivated

0xFF: ACC OFF

0xFE: ACC ON

ubi_event_flg
  • 1: The end of the event
  • 0: The event start packet and the Mid-packet
ubi_on[UBI SERIAL NUMBER]
  • 1: Harsh acceleration. An event which triggered with a time longer than BS_Acce_Time, and a constant vertical acceleration speed higher than BS_Acce_Deta
  • 2: Harsh brake. Accelerated speed of y-axis is less than BS_Dece_Deta
  • 3: Harsh lane. switching The absolute value of the accelerated speed of x-axis is greater than BS_Lane_Deta and the orientation changes of the satellite positioning is less than BS_Lane_Angle
  • 4: Sharp turn. The absolute value of the accelerated speed of X-axis is greater than BS_Turn_Deta and the orientation changes of the satellite positioning exceeds BS_Turn_Angle
  • 5: Collision. The absolute value of the vehicle's acceleration is greater than BS_Coll_Deta and the vehicle's attitude angle change does not exceed BS_Coll_Angle
  • 6: Vehicle stability. An event which triggered within a time longer than BS_Stab_Time, and a constant change of the navigation angle with the angle speed absolute value higher than BS_Stab_Rate.
  • 7: Rollover. The pitch or roll angle changes by more than BS_Roll_Angle
  • 8: Abnormal attitude. The maximum variable of pitch angle and roll angle is greater than SAtt_Min_Deta and less than SAtt_Max_Deta
ubi_kind[UBI SERIAL NUMBER]
  • 0: None
  • 1: UBI Event
  • 2: UBI Alarm
ubi_a[UBI SERIAL NUMBER]

Context depends from the ubi_on[UBI SERIAL NUMBER] parameter

UBI_ON UBI_A
1 Harsh acceleration BS_Acce_Deta
2 Harsh brake BS_Dece_Deta
3 Harsh lane BS_Lane_Deta
4 Sharp turn BS_Turn_Deta
5 Collision BS_Coll_Deta
6 Vehicle stability BS_Stab_Rate
7 Rollover BS_Roll_Angle
8 Abnormal attitude SAtt_Min_Deta

ubi_b[UBI SERIAL NUMBER]

Context depends from the ubi_on[UBI SERIAL NUMBER] parameter

UBI_ON UBI_B
1 Harsh acceleration BS_Acce_Time
2 Harsh brake none
3 Harsh lane BS_Lane_Angle
4 Sharp turn BS_Turn_Angle
5 Collision BS_Coll_Angle
6 Vehicle stability BS_Stab_Time
7 Rollover none
8 Abnormal attitude SAtt_Max_Deta

acc_x_d[UBI SERIAL NUMBER]

Accelerated speed of x-axis

m/s^2
acc_y_d[UBI SERIAL NUMBER]

Accelerated speed of y-axis

m/s^2
gyr_z_d[UBI SERIAL NUMBER]

Angular velocity of z-axis

degree/s
pitch_ang[UBI SERIAL NUMBER]

Vehicle pitch angle

degree
roll_ang[UBI SERIAL NUMBER]

Vehicle roll angle

degree
yaw_ang[UBI SERIAL NUMBER]

Vehicle orientation change angle

degree
car_spd[UBI SERIAL NUMBER]

Vehicle speed

m/s
ins_flg[UBI SERIAL NUMBER]

INS activated flag

INS_Flag Physical significance

  • Ins_Flag=0: to be initialized. Disable UBI
  • Ins_Flag=1: INS activation step 1. Enable UBI
  • Ins_Flag=2: INS activation step 2. Enable UBI
  • Ins_Flag=3: INS activation step 3. Enable UBI
  • Ins_Flag=4: INS activation completed. Enable UBI

ubi_num[UBI SERIAL NUMBER]

UBI Serial number. Has range in 0-30

ubi_vld[UBI SERIAL NUMBER]

UBI Valid flag

1: Valid

0: Invalid

acc_t_d[UBI SERIAL NUMBER]

Vehicle horizontal acceleration change rate

m/s
coll_t_h[UBI SERIAL NUMBER]

Direction of the collision. Will be registrated only if the module version = 1

degree

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Remplissez le formulaire pour commencer à travailler avec Wialon

Étape 1
Étape 2
Étape 3
Prénom*
Nom*
Entreprise*
Email*
Téléphone