Traceur GPS Iter 120 | Intégré à Wialon

Compatible avec Wialon:

Accéléromètre
Gestion à distance via SMS
Communication via TCP
Communication via UDP

Afin d'identifier le boîtier Iter 120 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	Iter 120
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Iter 120 pour les utiliser dans Wialon Hosting :

Port du serveur:

22452

1 unités Iter 120 connectées au le centre de données Wialon — Ça fait 0% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
seq_num	Package sequence number (starts from 1 after device is rebooted, and is increased by 1 for every package)
status	A bitwise variable that indicates specific states of the device and validity of data. Bit 0: GPS status 0 = GPS is not fixed, 1 = GPS is fixed Bit 1: Is device designed for car. 0 = Device is not designed for car, 1 = Device is designed for car Bit 2: Car engine status. 0 = Off, 1 = On Bit 3: Is accelerometer supported. 0 = No accelerometer, 1 = Accelerometer is supported Bit 4: Motion-warning status. 0 = Activated, 1 = Deactivated Bit 5: Output control status. 0 = Not have output control, 1 = Output control is supported Bit 6: Output status. 0 = Off 1 = On Bit 7: External charging status. 0 = No external charging, 1 = External charging is supported Bit 8: Device charge status. 0 = Device is not charging, 1 = Device is charging Bit 9: Device activity status. 0 = Device is stationary, 1 = Device is active Bit 10: GPS module status. 0 = GPS module is not running, 1 = GPS module is running Bit 15: DIN0 level. 0 = low, 1 = high
report	Type of report: Value 1: Ignition on Value 2: Ignition off Value 3: DIN changed
warning_type	Type of warning packet: Value 1: External power cut-off Value 2: SOS (Panic) Value 5: Shift warning Value 8: GPS antenna open-circuit (only for the device with external GPS antenna) Value 9: GPS antenna short-circuit (only for the device with external GPS antenna) Value 36: External power reconnected Value 129: Under-speed warning Value 130: Over-speed warning Value 131: In-to-fence warning Value 132: Out-to-fence warning Value 135: External battery low voltage
battery	Battery voltage (in mV)
ain0	analog input port 0 value (in cV)
ain1	analog input port 1 value (in cV)
mileage	Device mileage (in m)
gsm_counter	GSM counter from last GSM command (in min)
gps_counter	GPS counter from last GPS command (in min)
hourmeter	Accumulated time (in seconds) that device identified ignition turned on
instruction_response	Text that contains result of execution of instruction
instruction_type	Type of instruction
instruction_uid	UID of instruction
ps_ver	Param-set version
ps_original_size	Param-set original size
ps_compressed_size	Param-set compressed size
ps_check_sum	Param-set checksum
offset	Param-set uploading offset
data	Param-set uploading data
mcc	Mobile country code
mnc	Mobile network code
lac	Location area code
cell_id	Cell ID with RNC
rx_level	Cell signal level
device_language	Device language Value 1: English
timezone	Device timezone
sys_ver	System version
app_ver	Application version

Nom du paramètre

Description

Unités

seq_num

Package sequence number (starts from 1 after device is rebooted, and
is increased by 1 for every package)

status

A bitwise variable that indicates specific states of the device and validity of data.

Bit 0: GPS status 0 = GPS is not fixed, 1 = GPS is fixed
Bit 1: Is device designed for car. 0 = Device is not designed for car, 1 = Device is designed for car
Bit 2: Car engine status. 0 = Off, 1 = On
Bit 3: Is accelerometer supported. 0 = No accelerometer, 1 = Accelerometer is supported
Bit 4: Motion-warning status. 0 = Activated, 1 = Deactivated
Bit 5: Output control status. 0 = Not have output control, 1 = Output control is supported
Bit 6: Output status. 0 = Off 1 = On
Bit 7: External charging status. 0 = No external charging, 1 = External charging is supported
Bit 8: Device charge status. 0 = Device is not charging, 1 = Device is charging
Bit 9: Device activity status. 0 = Device is stationary, 1 = Device is active
Bit 10: GPS module status. 0 = GPS module is not running, 1 = GPS module is running
Bit 15: DIN0 level. 0 = low, 1 = high

report

Type of report:

Value 1: Ignition on
Value 2: Ignition off
Value 3: DIN changed

warning_type

Type of warning packet:

Value 1: External power cut-off
Value 2: SOS (Panic)
Value 5: Shift warning
Value 8: GPS antenna open-circuit (only for the device with external GPS antenna)
Value 9: GPS antenna short-circuit (only for the device with external GPS antenna)
Value 36: External power reconnected
Value 129: Under-speed warning
Value 130: Over-speed warning
Value 131: In-to-fence warning
Value 132: Out-to-fence warning
Value 135: External battery low voltage

battery

Battery voltage (in mV)

ain0

analog input port 0 value (in cV)

ain1

analog input port 1 value (in cV)

mileage

Device mileage (in m)

gsm_counter

GSM counter from last GSM command (in min)

gps_counter

GPS counter from last GPS command (in min)

hourmeter

Accumulated time (in seconds) that device identified ignition turned on

instruction_response

Text that contains result of execution of instruction

instruction_type

Type of instruction

instruction_uid

UID of instruction

ps_ver

Param-set version

ps_original_size

Param-set original size

ps_compressed_size

Param-set compressed size

ps_check_sum

Param-set checksum

offset

Param-set uploading offset

data

Param-set uploading data

mcc

Mobile country code

mnc

Mobile network code

lac

Location area code

cell_id

Cell ID with RNC

rx_level

Cell signal level

device_language

Device language

Value 1: English

timezone

Device timezone

sys_ver

System version

app_ver

Application version

Remplissez le formulaire pour commencer à travailler avec Wialon

Produits

Produits de niche pour des tâches spécifiques

Iter 120

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon