Traceur GPS Rastrear Evolution | Intégré à Wialon

Caractéristiques Rastrear Evolution:

Boîte à mémoire
Compatibilité avec GLONASS

Compatible avec Wialon:

Accéléromètre
Données remontées du CANbus
Gestion à distance via GPRS
Identification du conducteur
Capteurs numériques
Communication via TCP

Afin d'identifier le boîtier Rastrear Evolution les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	Rastrear Evolution
ID unique:	serial

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Rastrear Evolution pour les utiliser dans Wialon Hosting :

Port du serveur:

21505

1 unités Rastrear Evolution connectées au le centre de données Wialon — Ça fait 0% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
event	Event which trigger the message: 01 - Ignition On 02 - Panic button On 03 - Auxiliary input 4 On 04 - Auxiliary input 1 On (engine speed digital input) 05 - Anti-theft button On 06 - GPS antenna section On 07 - Battery low voltage On 08 - Temperature limit exceded On 09 - Anti-theft violation On 10 - Parking mode activation On 11 - Positioning requested by Backoffice 12 - Sleep Mode 13 - Position violation On 14 - Tracking 15 - Tracking at sleep 16 - Auxiliary input 2 On (vehicle speed digital input) 17 - Accelerometer event 18 - Auxiliary input 3 On 19 - Weakened GSM signal On 20 - Low backup battery On 21 - Backup battery fault On 22 - End of useful life for backup battery On 23 - Factory configuration reset. 24 - Short circuit at outputs 26 - Maximum speed limit trespassing On 27 - Course Change 28 - Number of GPS satellite drops to zero 29 - Gateway event 37 - Modem Critical Condition 38 - Ignition OFF 39 - Jamming Detection 40 - SMS Reception 41 - Fence event ON 42 - Vehicle over speed On (from sensor inputs) 43 - Engine over speed On (from sensor inputs) 44 - Free Wheel On (from sensor inputs) 45 - Vehicle over speed On (from CAN) 46 - Engine over speed On (from CAN) 47 - Free Wheel On (from CAN) 48 - Over Temperature On (from CAN) 49 - Panic button OFF 50 - Anti-theft button OFF 51 - Harsh Acceleration 1 52 - Idle Engine ON 1 53 - Alternator Failure ON 1 54 - Tilt ON 1 55 - Rain detection ON 1 56 - Driver ID login 1 57 - VDR Communication Link ON 58 - VDR Driver list changed 59 - Valid PIN received 60 - Displayed Message Status 61 - BVDR Status Change 62 - Invalid login attempt 63 - Workshop Login 64 - Pairing/Authentication failure limit 128 - Fence table erased due to error in check sum 131 - Auxiliary input 4 Off 1 132 - Auxiliary input 1 Off (engine speed digital input) 134 - GPS antenna section Off 135 - Battery low voltage Off 136 - Temperature limit exceded Off 137 - Anti-theft violation Off 141 - Position violation Off 144 - Auxiliary input 2 Off (vehicle speed digital input) 1 146 - Auxiliary input 3 Off 147 - Weakened GSM signal Off 148 - Low backup battery Off 149 - Backup battery fault Off 154 - Maximum speed limit trespassing Off 169 - Fence Event OFF 170 - Vehicle over speed Off (from sensor inputs) 171 - Engine over speed Off (from sensor inputs) 172 - Free Wheel Off (from sensor inputs) 173 - Vehicle over speed Off (from CAN) 174 - Engine over speed Off (from CAN) 175 - Free Wheel Off (from CAN) 176 - Overtemperature Off (from CAN) 179 - Harsh Braking 180 - Idle Engine Off 181 - Alternator Failure OFF 182 - Tilt OFF 183 - Rain Detection OFF 184 - Driver Id logout 185 - VDR Communication Link OFF 187 - Invalid PIN received 188 - Printed Message status 189 - BVDR Data Loss 191 - Workshop logout
gsm	GPRS Signal Quality
gps_tm	GPS Timestamp
valid	GPS digital status: 0 - invalid 1 - valid
dop	GPS DOP
inN	Input status witn N number: 1-16 numbers - Default Input status 17-32 numbers - Extended Input Status 1
ex_inputs	Bitwise parameter. Extended Input Status 2
outN	Output status with N number
pwr_ext	Main Battery voltage
pwr_int	Backup Battery voltage	V
temp_int	Temperature	°C
bc_l_status	Backoffice link status: 1 - link active 0 - Backoffice not available
odometer	Odometer (from GPS)	km
accel_x	X accelerometer data	G
accel_y	Y accelerometer data	G
accel_z	Z accelerometer data	G
accel_res	Resultant acceleration	G
v_speed	Vehicle Speed (from sensor)	km/h
engine_rpm	Engine speed (from sensor)	rpm
can_status	CAN Status. Bitwise parameter: Bit 0 = 0 – inactive Bit 0 = 1 – active
can_speed	Vehicle speed (from CAN)	km/h
can_odometer	Odometer (from CAN)	km
can_eng_rpm	Engine speed (from CAN)	rpm
can_temp	Temperature (from CAN)	°C
can_fuel_consumpt	Fuel consumption (from CAN)	l
can_trans_gear	Transmission Gear (from CAN)
avg_speed	Average speed (from GPS)	km/h
engine_run_time	Engine running Time meter	sec
fence_group_a	Electronic Fence Group A ID: ID of the current active fence (0 = no fence)
fence_group_b	Electronic Fence Group B ID: ID of the current active fence (0 = no fence)
fence_route	Electronic Fence Route ID: ID of the current active route (0 = no route)
odometer_sn	Odometer (from Sensor input)	km
avl_driver	Driver’s identification
tm_event_d	Same timestamp event discriminator
bdvr_status	BVDR Status
bdvr_sn	BVDR Serial Number
modem_imei	Serial number of modem
sim_num	SIM card number of modem
err_code	Command error code: 1 - Preamble error 2 - Message size inconsistent 3 - Serial number different 4 - Input code inconsistent 5 - Output code inconsistent 6 - Parameters table inconsistent 7 - Command disabled 8 - Invalid sequential 9 - Application block contents invalid 10 - Type of test invalid 11 - Date/time invalid 12 - Invalid Checksum 13 - Unexpected command 14 - Low main power during update process 15 - Flash Memory error 16 - Electronic Fence data area full 17 - Electronic Fence operation error 19 - Command rejected 20 - Command error 21 - Command was queued
cmd_ack	Command acknowledge: 1 - successfully

Nom du paramètre

Description

Unités

event

Event which trigger the message:
01 - Ignition On
02 - Panic button On
03 - Auxiliary input 4 On
04 - Auxiliary input 1 On (engine speed digital input)
05 - Anti-theft button On
06 - GPS antenna section On
07 - Battery low voltage On
08 - Temperature limit exceded On
09 - Anti-theft violation On
10 - Parking mode activation On
11 - Positioning requested by Backoffice
12 - Sleep Mode
13 - Position violation On
14 - Tracking
15 - Tracking at sleep
16 - Auxiliary input 2 On (vehicle speed digital input)
17 - Accelerometer event
18 - Auxiliary input 3 On
19 - Weakened GSM signal On
20 - Low backup battery On
21 - Backup battery fault On
22 - End of useful life for backup battery On
23 - Factory configuration reset.
24 - Short circuit at outputs
26 - Maximum speed limit trespassing On
27 - Course Change
28 - Number of GPS satellite drops to zero
29 - Gateway event
37 - Modem Critical Condition
38 - Ignition OFF
39 - Jamming Detection
40 - SMS Reception
41 - Fence event ON
42 - Vehicle over speed On (from sensor inputs)
43 - Engine over speed On (from sensor inputs)
44 - Free Wheel On (from sensor inputs)
45 - Vehicle over speed On (from CAN)
46 - Engine over speed On (from CAN)
47 - Free Wheel On (from CAN)
48 - Over Temperature On (from CAN)
49 - Panic button OFF
50 - Anti-theft button OFF
51 - Harsh Acceleration 1
52 - Idle Engine ON 1
53 - Alternator Failure ON 1
54 - Tilt ON 1
55 - Rain detection ON 1
56 - Driver ID login 1
57 - VDR Communication Link ON
58 - VDR Driver list changed
59 - Valid PIN received
60 - Displayed Message Status
61 - BVDR Status Change
62 - Invalid login attempt
63 - Workshop Login
64 - Pairing/Authentication failure limit
128 - Fence table erased due to error in check sum
131 - Auxiliary input 4 Off 1
132 - Auxiliary input 1 Off (engine speed digital input)
134 - GPS antenna section Off
135 - Battery low voltage Off
136 - Temperature limit exceded Off
137 - Anti-theft violation Off
141 - Position violation Off
144 - Auxiliary input 2 Off (vehicle speed digital input) 1
146 - Auxiliary input 3 Off
147 - Weakened GSM signal Off
148 - Low backup battery Off
149 - Backup battery fault Off
154 - Maximum speed limit trespassing Off
169 - Fence Event OFF
170 - Vehicle over speed Off (from sensor inputs)
171 - Engine over speed Off (from sensor inputs)
172 - Free Wheel Off (from sensor inputs)
173 - Vehicle over speed Off (from CAN)
174 - Engine over speed Off (from CAN)
175 - Free Wheel Off (from CAN)
176 - Overtemperature Off (from CAN)
179 - Harsh Braking
180 - Idle Engine Off
181 - Alternator Failure OFF
182 - Tilt OFF
183 - Rain Detection OFF
184 - Driver Id logout
185 - VDR Communication Link OFF
187 - Invalid PIN received
188 - Printed Message status
189 - BVDR Data Loss
191 - Workshop logout

gsm

GPRS Signal Quality

gps_tm

GPS Timestamp

valid

GPS digital status:
0 - invalid
1 - valid

dop

GPS DOP

inN

Input status witn N number:
1-16 numbers - Default Input status
17-32 numbers - Extended Input Status 1

ex_inputs

Bitwise parameter. Extended Input Status 2

outN

Output status with N number

pwr_ext

Main Battery voltage

pwr_int

Backup Battery voltage

temp_int

Temperature

°C

bc_l_status

Backoffice link status:
1 - link active
0 - Backoffice not available

odometer

Odometer (from GPS)

accel_x

X accelerometer data

accel_y

Y accelerometer data

accel_z

Z accelerometer data

accel_res

Resultant acceleration

v_speed

Vehicle Speed (from sensor)

km/h

engine_rpm

Engine speed (from sensor)

rpm

can_status

CAN Status. Bitwise parameter:
Bit 0 = 0 – inactive
Bit 0 = 1 – active

can_speed

Vehicle speed (from CAN)

km/h

can_odometer

Odometer (from CAN)

can_eng_rpm

Engine speed (from CAN)

rpm

can_temp

Temperature (from CAN)

°C

can_fuel_consumpt

Fuel consumption (from CAN)

can_trans_gear

Transmission Gear (from CAN)

avg_speed

Average speed (from GPS)

km/h

engine_run_time

Engine running Time meter

sec

fence_group_a

Electronic Fence Group A ID:
ID of the current active fence (0 = no fence)

fence_group_b

Electronic Fence Group B ID:
ID of the current active fence (0 = no fence)

fence_route

Electronic Fence Route ID:
ID of the current active route (0 = no route)

odometer_sn

Odometer (from Sensor input)

avl_driver

Driver’s identification

tm_event_d

Same timestamp event discriminator

bdvr_status

BVDR Status

bdvr_sn

BVDR Serial Number

modem_imei

Serial number of modem

sim_num

SIM card number of modem

err_code

Command error code:
1 - Preamble error
2 - Message size inconsistent
3 - Serial number different
4 - Input code inconsistent
5 - Output code inconsistent
6 - Parameters table inconsistent
7 - Command disabled
8 - Invalid sequential
9 - Application block contents invalid
10 - Type of test invalid
11 - Date/time invalid
12 - Invalid Checksum
13 - Unexpected command
14 - Low main power during update process
15 - Flash Memory error
16 - Electronic Fence data area full
17 - Electronic Fence operation error
19 - Command rejected
20 - Command error
21 - Command was queued

cmd_ack

Command acknowledge:
1 - successfully

Remplissez le formulaire pour commencer à travailler avec Wialon

Produits

Produits de niche pour des tâches spécifiques

Rastrear Evolution

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon