Traceur GPS Seeworld R12L | Intégré à Wialon

Compatible avec Wialon:

Modification du paramètre "speed"

Afin d'identifier le boîtier Seeworld R12L les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	Seeworld R12L
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Seeworld R12L pour les utiliser dans Wialon Hosting :

Port du serveur:

22538

969 unités Seeworld R12L connectées au le centre de données Wialon — Ça fait 0.04% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
voltage	voltage	V
gsm	GSM signal strength degree
term_info	The BIT description Bit7: 1: Oil cut off, 0: Oil connect Bit6: 1: GPS positioned, 0: GPS not positioned Bit5-Bit3: 111: Overspeed alarm 110: Enter GEO fence alarm 101: Displacement alarm 100: SOS alarm 011: Low power alarm 010: Power off alarm 001: Vibration alarm 000: Normal Bit2: 1: Connected outside power, 0: Not connected outside power Bit1: 1: ACC ON, 0: ACC OFF Bit0: 1: Set up defense, 0: ACC OFF
hdop	Horizontal Dilution of Precision
mileage	Mileage	km
battery_vol	Voltage level: 0-100	%
data_mode	Data reporting mode: 0x00: Regular reporting 0x01: Fixed interval reporting 0x02: Inflection point upload 0x03: ACC status change upload 0x04: After changing from motion to static state, the last positioning point is transmitted. 0x05: After the network is disconnected and reconnected, the last valid upload point before reporting 0x06: Reporting mode: Mandatory upload of GPS points for ephemeris update 0x07: Reporting mode: press the button to upload the anchor point 0x08: Reporting mode: report location information after power on 0x09: Reporting mode: not used 0x0A : Reporting mode: the device reports the last longitude and latitude after being stationary, but the time is updated 0x0B : WIFI parsing longitude and latitude upload package 0x0C : Reporting mode: LJDW (immediate positioning) command reporting 0x0D : Reporting mode: report the last longitude and latitude after the device is stationary 0x0E : Reporting mode: GPSDUP upload (scheduled upload in static state)
gps_real_up	GPS real-time retransmission: 0x00 Real-time Upload 0x01 Repass
travel_time	Total travel time accounts in seconds	sec
serial	Serial number of the meaasge
imsi	IMSI number of the SIM card
pwr_ext	Voltage of external power	V
door	door status
iccid	ICCID number
imei	imei number
hum	Humidity value (the range is 0-100).	%RH
temp	Temperature (Celsius)	C

Nom du paramètre

Description

Unités

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Cell Tower ID

voltage

gsm

GSM signal strength degree

term_info

The BIT description
Bit7:
1: Oil cut off, 0: Oil connect

Bit6:
1: GPS positioned, 0: GPS not positioned

Bit5-Bit3:

111: Overspeed alarm
110: Enter GEO fence alarm
101: Displacement alarm
100: SOS alarm
011: Low power alarm
010: Power off alarm
001: Vibration alarm
000: Normal

Bit2:
1: Connected outside power, 0: Not connected outside power

Bit1:
1: ACC ON, 0: ACC OFF

Bit0:
1: Set up defense, 0: ACC OFF

hdop

Horizontal Dilution of Precision

mileage

Mileage

battery_vol

Voltage level: 0-100

data_mode

Data reporting mode:

0x00: Regular reporting
0x01: Fixed interval reporting
0x02: Inflection point upload
0x03: ACC status change upload
0x04: After changing from motion to static state, the last positioning point is transmitted.
0x05: After the network is disconnected and reconnected, the last valid upload point before reporting
0x06: Reporting mode: Mandatory upload of GPS points for ephemeris update
0x07: Reporting mode: press the button to upload the anchor point
0x08: Reporting mode: report location information after power on
0x09: Reporting mode: not used
0x0A : Reporting mode: the device reports the last longitude and latitude after being stationary, but the time is updated
0x0B : WIFI parsing longitude and latitude upload package
0x0C : Reporting mode: LJDW (immediate positioning) command reporting
0x0D : Reporting mode: report the last longitude and latitude after the device is stationary
0x0E : Reporting mode: GPSDUP upload (scheduled upload in static state)

gps_real_up

GPS real-time retransmission:

0x00 Real-time Upload
0x01 Repass

travel_time

Total travel time accounts in seconds

sec

serial

Serial number of the meaasge

imsi

IMSI number of the SIM card

pwr_ext

Voltage of external power

door

door status

iccid

ICCID number

imei

imei number

hum

Humidity value (the range is 0-100).

%RH

temp

Temperature (Celsius)

Remplissez le formulaire pour commencer à travailler avec Wialon

Wialon : une plateforme unique pour des besoins variés

Seeworld R12L

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon