GPS tracker Seeworld R12L | Integrated with Wialon

Supported in Wialon:

Modificação do parâmetro "velocidade"

The following data should also be added to Seeworld R12L unit properties section of Wialon GPS tracking software :

Device type:	Seeworld R12L
ID único:	imei

Specify the following parameters in configuration software or configuration Seeworld R12L for use in Wialon Hosting :

Porta do servidor:

22538

971 units of Seeworld R12L device type are connected to Wialon Data Center. This represents 0.04% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
voltage	voltage	V
gsm	GSM signal strength degree
term_info	The BIT description Bit7: 1: Oil cut off, 0: Oil connect Bit6: 1: GPS positioned, 0: GPS not positioned Bit5-Bit3: 111: Overspeed alarm 110: Enter GEO fence alarm 101: Displacement alarm 100: SOS alarm 011: Low power alarm 010: Power off alarm 001: Vibration alarm 000: Normal Bit2: 1: Connected outside power, 0: Not connected outside power Bit1: 1: ACC ON, 0: ACC OFF Bit0: 1: Set up defense, 0: ACC OFF
hdop	Horizontal Dilution of Precision
mileage	Mileage	km
battery_vol	Voltage level: 0-100	%
data_mode	Data reporting mode: 0x00: Regular reporting 0x01: Fixed interval reporting 0x02: Inflection point upload 0x03: ACC status change upload 0x04: After changing from motion to static state, the last positioning point is transmitted. 0x05: After the network is disconnected and reconnected, the last valid upload point before reporting 0x06: Reporting mode: Mandatory upload of GPS points for ephemeris update 0x07: Reporting mode: press the button to upload the anchor point 0x08: Reporting mode: report location information after power on 0x09: Reporting mode: not used 0x0A : Reporting mode: the device reports the last longitude and latitude after being stationary, but the time is updated 0x0B : WIFI parsing longitude and latitude upload package 0x0C : Reporting mode: LJDW (immediate positioning) command reporting 0x0D : Reporting mode: report the last longitude and latitude after the device is stationary 0x0E : Reporting mode: GPSDUP upload (scheduled upload in static state)
gps_real_up	GPS real-time retransmission: 0x00 Real-time Upload 0x01 Repass
travel_time	Total travel time accounts in seconds	sec
serial	Serial number of the meaasge
imsi	IMSI number of the SIM card
pwr_ext	Voltage of external power	V
door	door status
iccid	ICCID number
imei	imei number
hum	Humidity value (the range is 0-100).	%RH
temp	Temperature (Celsius)	C

Parameter name

Description

Units

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Cell Tower ID

voltage

gsm

GSM signal strength degree

term_info

The BIT description
Bit7:
1: Oil cut off, 0: Oil connect

Bit6:
1: GPS positioned, 0: GPS not positioned

Bit5-Bit3:

111: Overspeed alarm
110: Enter GEO fence alarm
101: Displacement alarm
100: SOS alarm
011: Low power alarm
010: Power off alarm
001: Vibration alarm
000: Normal

Bit2:
1: Connected outside power, 0: Not connected outside power

Bit1:
1: ACC ON, 0: ACC OFF

Bit0:
1: Set up defense, 0: ACC OFF

hdop

Horizontal Dilution of Precision

mileage

Mileage

battery_vol

Voltage level: 0-100

data_mode

Data reporting mode:

0x00: Regular reporting
0x01: Fixed interval reporting
0x02: Inflection point upload
0x03: ACC status change upload
0x04: After changing from motion to static state, the last positioning point is transmitted.
0x05: After the network is disconnected and reconnected, the last valid upload point before reporting
0x06: Reporting mode: Mandatory upload of GPS points for ephemeris update
0x07: Reporting mode: press the button to upload the anchor point
0x08: Reporting mode: report location information after power on
0x09: Reporting mode: not used
0x0A : Reporting mode: the device reports the last longitude and latitude after being stationary, but the time is updated
0x0B : WIFI parsing longitude and latitude upload package
0x0C : Reporting mode: LJDW (immediate positioning) command reporting
0x0D : Reporting mode: report the last longitude and latitude after the device is stationary
0x0E : Reporting mode: GPSDUP upload (scheduled upload in static state)

gps_real_up

GPS real-time retransmission:

0x00 Real-time Upload
0x01 Repass

travel_time

Total travel time accounts in seconds

sec

serial

Serial number of the meaasge

imsi

IMSI number of the SIM card

pwr_ext

Voltage of external power

door

door status

iccid

ICCID number

imei

imei number

hum

Humidity value (the range is 0-100).

%RH

temp

Temperature (Celsius)

Preencha um formulário de solicitação para começar

Wialon: a plataforma única para necessidades diversas

Seeworld R12L

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Seja um parceiro

Solicite o Wialon na sua região

Preencha um formulário de solicitação para começar