| gps_quality |
Possible values:
0: GPS data are reliable and effective
1: data are not necessarily reliable, this situation usually occurs when the
number of tracking satellites is insufficient
2: device has no GPS module.
|
|
| net |
Registered network type:
0: wired network
1: wifi network
2: 3G/4G network
|
|
| cid |
Customer identifier |
|
| spi_s_s |
Ground speed |
|
| ioN_name |
The name of IO sensor.
N - IO number
|
|
| spi_s_g3s |
Signal strength of the 3G network. Range: 0-5.
0: no signal or no connection
5: The best signal
|
|
| en |
Real-time position monitoring status:
0 - disabled
1 - enabled
|
|
| push |
Channel number alarm:
Bit mask, BIT0-BIT31 indicates channel 1-channel 32, 1 indicates that the channel's alarm needs to push, otherwise no push)
Other alarms: 0 - don't push, 1 - push
(Alarm Info)
|
|
| acc_z |
Acceleration along z-axis
(Alarm Info, Acceleration Alarm)
|
|
| devclass |
Device class:
0: DVR
1: IPC
2: NVR
3: MIPC
4: MDVR
|
|
| mode |
Link mode:
0: direct mode
1: transmit mode
|
|
| carnum |
Device plate number |
|
| channelmask |
Channel alarm 32 bit mask. Each bit indicates corresponding channel alarm state: 0 - alarm off, 1 - alarm on.
(Alarm Info)
|
|
| spi_s_td |
Device temperature |
|
| ioN_u |
IO usage (N - IO number):
0 - no usage
1 - emergency alarm
2 - call
3 - neutral
4 - air conditioning
5 - pressure table
6 - over height
7 - green cover
8 - front door
9 - front door open
11 - middle door 1
12 - middle door 1 open
13 - middle door 1 off
14 - back door 1
15 - back door 1 open
16 - back door 1 off
17 - low beam light
18 - high beam light
19 - right turn
20 - left turn
21 - brake
22 - security commitment
|
|
| cname |
Customer name |
|
| spi_s_sinfo_o |
Storage media type:
0: Internal (default)
1: External
|
|
| devname |
Device name |
|
| channel |
Channel 32 bit mask. Each bit indicates corresponding channel state: 0 - invalid, 1 - valid.
(Alarm Info)
|
|
| spi_s_stc |
Total number of the storage device |
|
| eid |
Wifi's essid |
|
| alarmcount |
The number of times the same alarm was sent.
(Alarm Info)
|
|
| autono |
Device number |
|
| spi_s_g4 |
4G status:
0: module does not exist
1: No SIM card
2: No module and No SIM card
3: module exists and SIM card exists
|
|
| uno |
Driver number |
|
| spi_s_sinfo_ls |
Free capacity |
|
| autocar |
Vehicle number |
|
| spi_s_sinfo_s |
Storage device status:
0: normal
1: malfunction
|
|
| spi_s_tm |
Total mileage |
km |
| spi_s_ws |
Signal strength of WIFI network. Range: 0-5.
0: no signal or no connection
5: the best signal
|
|
| ign |
Ignition:
0 - ignition off
1 - ignition on
|
|
| alarminfo_l |
Language:
0: Simplified Chinese
1: English
2: Korean
3: the Italian language
4: German
5: Thai
6: Turkey
7: Portugal
8: Spain
9: Romania
10: Greece
11: French
12: Russian
13: Dutch
14: Hebrew
15: Chinese Traditional
(Alarm Info)
|
|
| spi_s_sinfo_t |
Storage media type:
0: HDD
1: USB
2: SD card
|
|
| spi_m |
Indicates that the active message
contains GPS or state; bit reprensent.
Valid when bit is 1;
Bit0: GPS;
Bit1: Device status
BIT2: oil volume
|
|
| pro |
Current protocol version number
|
|
| sno |
1 ~ 255. Custom alarms are numbered by the device to distinguish between multiple custom alarms. The number must not be repeated.
(Alarm Info)
|
|
| spi_s_alarm |
Alarm status |
|
| name |
current stop name
(Passenger Flow Count)
|
|
| ioN_nser |
IO abbreviation.
N - IO number
|
|
| spi_s_g3 |
3G Status:
0: module does not exist
1: No SIM card
2: No module and No SIM card
3: module exists and SIM card exists
|
|
| mon_mode |
Real-time location monitoring methods:
1 - by distance interval
2 - by time interval
3 - by distance and time intervals
|
|
| num |
Upload frequency ranging from 0 to 65535.
Upload automatically stops after reaching the count.
0 or when the field is empty there is no limit to the number of times.
|
|
| downp |
The number of people get off the vehicle
(Passenger Flow Count)
|
|
| datsrc |
Alarm Source: CANINFO(OBD); 6-AXIS;TIREPRESS; TRUCKLOAD;
(Alarm Info)
|
|
| spi_real |
If it does not exist, means real-time
upload:
0: means real-time upload;
1: means replenishment
|
|
| acc_direction |
Acceleration direction:
0: X direction;
1: Y direction;
2: Z direction;
3: collision
4: rollover;
5: bumps
6: rapid acceleration
7: rapid deceleration
8:G4
9:G5
10:harsh left turn
11:harsh right turn
(Alarm Info, Acceleration Alarm)
|
|
| cs |
clear sensor: to set passager counting to 0
0:No
1:Yes
(Passenger Flow Count)
|
0,1 |
| lch_N |
Channel number alarm:
N is channel number for which alarm is valid. Parameter is a bit mask. Every bit from 0 to 31 is set to 1 if corresponding channel is bounded to this alarm
(Alarm Info)
|
|
| sep |
Distance interval.
Automatic vehicle location reporting cycle distance, ranging from 5 to 65535.
10 m units. Such as '50' represent each with 500 meters to take the initiative to report a location information.
|
10 meters |
| time_close |
time when door got closed
(Passenger Flow Count)
|
|
| uname |
Driver name |
|
| acc_y |
Acceleration along y-axis
(Alarm Info, Acceleration Alarm)
|
|
| acc_x |
Acceleration along x-axis
(Alarm Info, Acceleration Alarm)
|
|
| run |
The number of restarts
(Alarm Info)
|
|
| spi_s_su |
Speed unit:
0: KM/H
1: MI/H
|
|
| ioN_s |
IO status (N - IO number):
0 - low level
1 - high level
2 - open circuit
3 - Short circuit
|
|
| cmdtype |
0: Release alarm
1: start the alarm
2: Pre alarm
(Alarm Info)
|
|
| maxsp |
Speed Alarm: highest speed value
(Alarm Info)
|
|
| lineno |
Line number |
|
| tm |
Time Interval.
Automatic vehicle location reporting time period, ranging from 5 to 65535. In seconds. Such as '300' for every 300 seconds to take the initiative to report a location information.
|
second |
| spi_s_4gs |
Signal strength of the 4G network. Range: 0-5.
0: no signal or no connection
5: The best signal
|
|
| spi_s_w |
WIFI status:
0: module does not exist
1: module exists
|
|
| errordescription |
Memory abnormity descriptor
(Alarm Info)
|
|
| spi_s_tc |
Temperature indoors
|
|
| pulses |
Number of pulses |
|
| atype |
Speed alarm category.
0: Standard low speed alarm
1: Standard high speed alarm
2: overspeed Pre alarm
3: real-time high-speed alarm
4: emergency deceleration alarm
5: speed recovery normal alarm
6: parking
7: threshold alarm
8: start alarm (speed from 0 to non-0)
(Alarm Info)
|
|
| errorcode |
1-32, Memory abnormity serial number
(Alarm Info)
|
|
| spi_s_v |
Voltage |
V |
| acc_v |
G4 or G5 Acceleration value
(Alarm Info, Acceleration Alarm)
|
|
| upp |
The number of people get on the vehicle
(Passenger Flow Count)
|
|
| spi_s_sinfo_ts |
Total capacity |
|
| minsp |
Speed Alarm: lowest speed value
(Alarm Info)
|
|
| v |
Voltage alarm: current voltage
(Alarm Info)
|
|
| st |
when alarmtype = 56 (DSM alarm): Sub-alarm type
0 Fatigue driving
1 No driver
2 Phone call alarm
3 Smoking
4 Distraction
5 LDW
6 FCW
7 Speed sign violation - not implemented
8 *reserved*
9 Following too close
10 Yawning
11 Pedestrian collision warning
12 Aisle overcrowding
13 Passengers on board outside the station
14 The full line change lanes
15 Watching and playing mobile phone
16 Seat belts not fastened
17 Driver certification failure
18 Blind spot detection (right side)
19 Forward collision warning (Virtual bumper)
20 Two Hands break away from the wheel
21 One hand break away from the wheel
22 Glasses blocking
23 Blind spot detection (left side)
24 Passengers interfere with the driver's drivering
(Alarm Info, DSM alarm)
|
|
| spi_s_sw |
Key ignition status:
0: Disable
1: Enable
|
|
| time_open |
Door opening time
(Passenger Flow Count)
|
|
| ser |
Abbreviation for alarm,1-32
(Alarm Info)
|
|
| alarmuid |
Indicates whether this alarm is the first alarm or the same alarm repeated.
(Alarm Info)
|
|
| storagetype |
0 - hard drive
1-U disk
2-SD card
(Alarm Info)
|
|
| alarmtype |
Alarm type:
0: Video loss alarm
1: Camera covered alarm
2: Motion detection alarm
3: storage abnormal alarm
4: User-defined alarm
5: sentries inspection alarm
6: Violation detection alarm
7: Emergency alarm
8: Speed alarm
9: Low voltage alarm
16: Internal use
17: get in/out of fence alarm
18: acc alarm
19: The peripherals are dropped
20: stop announcement
21: GPS Antenna
22: day and night switch
23: prohibit driving
32: serial alarm
33: Fatigue alarm
34: time-out parking alarm
35: gesture alarm
36: green driving alarm event
37: illegal ignition alarm
38: illegal shutdown alarm
39: Custom External Input Alarm
40: thinking LKJ
41: TAX3 item alarm
42: oil alarm
43: bus lane occupation alarm
44: forgotten alarm
45: special customer fault alarm
46: temperature abnormal alarm
47: temperature change abnormal alarm
48: smoke alarm
49: gbox alarm
50: license plate recognition alarm
51: speed alarm
52: wireless signal abnormal alarm
53: Arming alarm
54: phone-call alarm
55: GPS fault alarm
56: DSM alarm
57: fire box alarm
96: face comparison alarm
124: G-sensor abnormal alarm
|
|
| triggertype |
Trigger type:
0: Manual
1: automatic
(Alarm Info)
|
|
| alarminfo |
Alarm name
(Alarm Info)
|
|
| csp |
Speed Alarm: current speed value
(Alarm Info)
|
|
| storageindex |
1-32 (logical number of memory)
(Alarm Info)
|
|
