GPS трекер Concox JM-VL03 | Интегрирован с Wialon

Особенности Concox JM-VL03:

Наличие черного ящика

Поддержано в Wialon:

Изменение параметра "speed"

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Concox JM-VL03 в диалоге настроек объекта, укажите следующие данные :

Тип устройства:	Concox JM-VL03
Уникальный ID:	imei

Укажите следующие параметры в конфигурационной программе или в конфигурации Concox JM-VL03 для использования его в Wialon Hosting :

Порт сервера:

22087

Всего в серверном центре Wialon используется 14865 объектов Concox JM-VL03 — это составляет 0.63% от общего количества устройств в категории «Автомобильные контролеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
pwr_ext	Voltage level	V
gsm	GSM Signal Strength
imei	imei number
imsi	imsi number
iccid	iccid number
time	Time stamp
sats	Number of satellites
visible_sats	Visible satellites
sat#_signal_strength	Satellites signal strength, where # - number
mcc	LBS Main Cell Tower, mcc
mnc	LBS Main Cell Tower, mnc
lac	LBS Main Cell Tower, lac
cell_id	LBS Main Cell Tower, cell_id
rssi	LBS Main Cell Tower, rssi
lac#	LBS Auxiliary Cell Tower, lac, where # - number
cell_id#	LBS Auxiliary Cell Tower, cell_idm, where # - number
rssi#	LBS Auxiliary Cell Tower, rssi, where # - number
gsm_signal_csq	GSM Signal CSQ
battery_vol	Battery Voltage
hdop	HDOP
sequence_num	Sequence Number
inputs	Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
boot_reason	Boot Reason
mileage	Mileage statistics
real_time_mode#	Real time current mode, where # - number
static_parameter_mode#	Static mode parameter, where # - number
is_geofence_rectangular#	Circular o rectangular, 0 is circular, 1 is rectangular, where # - id
is_geofence_exit#	Enter or Exit geofence, 1 is enter, 2 is exit, where # - id
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
status_trig_time1	Report status: Trigger time
status_reg_content	Report status: Trigger content
gps_time_status	GPS is Real Time or Reupload
alm1	Alarm Bit 1
alm2	Alarm Bit 2
alm3	Alarm Bit 3
sta1	Status Bit 1
dyd	Fuel/Electricity Cutoff Status
sos_num#	SOS number, where # - number
center_num	Centre number
fence	GeoFence
door	Door status
cit	Content of Terminal Information (heartbeat msg)
alarm	0x00: Normal 0x01: SOS alert 0x02: Power cut alert 0x03: Vibrating alert 0x04: Entered fence alert 0x05: Left fence alert 0x06: Speed alert 0x09: Tow/theft alert 0x0A: Entered GPS blind spot alert 0x0B: Left GPS blind spot alert 0x0C: Powered on alert 0x0D: GPS first fix alert 0x0E: Low external battery alert 0x0F: External battery low voltage protection alert 0x10: SIM changed alert 0x11: Powered off alert 0x12: Airplane mode on following external battery low voltage protection 0x13: Tamper alert 0x14: Door alert 0x15: Powered off due to low battery 0x16: Sound-control alert 0x17: Rogue base station detected alert 0x18: Cover removed alert 0x19: Low internal battery alert 0x20: Entered deep sleep mode alert 0x23: Fall alert 0x29: Harsh acceleration 0x2A: Sharp left cornering alert 0x2B: Sharp right cornering alert 0x2C: Collision alert 0x30: Harsh braking 0x32: Device unplugged alert
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition

Имя параметра

Описание

Единицы измерения

pwr_ext

Voltage level

gsm

GSM Signal Strength

imei

imei number

imsi

imsi number

iccid

iccid number

time

Time stamp

sats

Number of satellites

visible_sats

Visible satellites

sat#_signal_strength

Satellites signal strength, where # - number

mcc

LBS Main Cell Tower, mcc

mnc

LBS Main Cell Tower, mnc

lac

LBS Main Cell Tower, lac

cell_id

LBS Main Cell Tower, cell_id

rssi

LBS Main Cell Tower, rssi

lac#

LBS Auxiliary Cell Tower, lac, where # - number

cell_id#

LBS Auxiliary Cell Tower, cell_idm, where # - number

rssi#

LBS Auxiliary Cell Tower, rssi, where # - number

gsm_signal_csq

GSM Signal CSQ

battery_vol

Battery Voltage

hdop

HDOP

sequence_num

Sequence Number

inputs

Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

boot_reason

Boot Reason

mileage

Mileage statistics

real_time_mode#

Real time current mode, where # - number

static_parameter_mode#

Static mode parameter, where # - number

is_geofence_rectangular#

Circular o rectangular, 0 is circular, 1 is rectangular, where # - id

is_geofence_exit#

Enter or Exit geofence, 1 is enter, 2 is exit, where # - id

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

status_trig_time1

Report status: Trigger time

status_reg_content

Report status: Trigger content

gps_time_status

GPS is Real Time or Reupload

alm1

Alarm Bit 1

alm2

Alarm Bit 2

alm3

Alarm Bit 3

sta1

Status Bit 1

dyd

Fuel/Electricity Cutoff Status

sos_num#

SOS number, where # - number

center_num

Centre number

fence

GeoFence

door

Door status

cit

Content of Terminal Information (heartbeat msg)

alarm

0x00: Normal

0x01: SOS alert

0x02: Power cut alert

0x03: Vibrating alert

0x04: Entered fence alert

0x05: Left fence alert

0x06: Speed alert

0x09: Tow/theft alert

0x0A: Entered GPS blind spot alert

0x0B: Left GPS blind spot alert

0x0C: Powered on alert

0x0D: GPS first fix alert

0x0E: Low external battery alert

0x0F: External battery low voltage protection alert

0x10: SIM changed alert

0x11: Powered off alert

0x12: Airplane mode on following external battery low voltage protection

0x13: Tamper alert

0x14: Door alert

0x15: Powered off due to low battery

0x16: Sound-control alert

0x17: Rogue base station detected alert

0x18: Cover removed alert

0x19: Low internal battery alert

0x20: Entered deep sleep mode alert

0x23: Fall alert

0x29: Harsh acceleration

0x2A: Sharp left cornering alert

0x2B: Sharp right cornering alert

0x2C: Collision alert

0x30: Harsh braking

0x32: Device unplugged alert

voltage

Voltage degree 0-6:

0: Lowest power and power off

1: No enough power to dial a call or send messages.

2: Low power and alarm

3: Lower power but can work normally

3~6: Work in good condition

Заполните заявку для начала работы с Wialon

Продукты

Нишевые продукты для решения точечных задач

Concox JM-VL03

Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Станьте партнером

Закажите Wialon в вашем регионе

Заполните заявку для начала работы с Wialon