| ibeacon_auxiliary_major# |
IBeacon auxiliary device major number |
|
| ela_sensor_#_humidity |
ELA official configuration software: humidity sensor value. Multiple sensor data can be uploaded at the same time. |
|
| x_acceleration_value |
X axis acceleration value |
|
| engine_load_percentage_at_current_speed |
Engine load percentage at the current speed |
|
| engine_fuel_filter |
Engine fuel filter sensor value |
|
| maintenance_mileage |
Mileage before maintenance |
|
| ela_sensor_#_alarm_type |
ELA official configuration software: alarm type value. Multiple sensor data can be uploaded at the same time. |
|
| current_network_format |
Current network format, possible values: 0:2G 1:3G 2:4G 3:LTE CAT-M1 4:LTE CAT-NB 255:unknow
|
|
| fms_firmware_version |
FMS Firmware version |
|
| ela_sensor_#_battery_voltage |
ELA official configuration software: battery voltage sensor value. Multiple sensor data can be uploaded at the same time. |
|
| ibeacon_auxiliary_minor# |
IBeacon auxiliary device minor number |
|
| trip_max_speed |
Max speed during a trip |
|
| escort_battery_voltage |
Battery voltage of an escort sensor |
|
| ibeacon_realtime_minor# |
Ibeacon device minor value |
|
| operation_hours |
Operation hours |
|
| phone_number |
Phone number |
|
| ela_sensor_#_alert_type |
ELA official configuration software: alert type value. Multiple sensor data can be uploaded at the same time. |
|
| ela_sensor_#_temperature |
ELA official configuration software: temperature sensor value. Multiple sensor data can be uploaded at the same time. |
|
| call_time |
Call log event: call time |
|
| rfid_number |
RFID Card number |
|
| axle_load |
Axle load |
|
| ibeacon_realtime_major# |
IBeacon device major |
|
| driver_login_status |
Status of the driver login |
|
| ibeacon_realtime_mac# |
IBeacon device MAC address |
|
| over_speeding_duration |
Duration of over speeding |
|
| total_vehicle_mileage |
Total vehicle mileage |
|
| external_voltage |
External voltage |
|
| ibeacon_auxiliary_mac# |
IBeacon auxiliary MAC address |
|
| vin |
Vehicle identification number |
|
| call_type |
Incoming call alarm type |
|
| status_information |
Status information
bit0: Overspeed status
bit1: Idle state
bit2: Fatigue driving state
bit3: Vibration state
bit4: ACC status 1 means ACC ON
bit5: GPS antenna status 1 means the antenna is cut off
bit16: Hijacking alarm 1 means hijacking alarm
bit17: Car theft alarm 1 means car theft alarm
bit18: LDR status 1 means cover opening alarm
|
|
| cruise_controll |
Cruise control mode status |
|
| photo_name |
Name of the photo which registered on the Wialon |
|
| battery_voltage |
Battery voltage |
|
| based_on_wheel_speed |
Wheel speed |
|
| temperature_serial |
Temperature sensor serial number |
|
| engine_torque |
Engine torque |
|
| remaining_fuel_volume |
Remaining fuel volume |
|
| y_acceleration_value |
Y axis acceleration value |
|
| ibeacon_realtime_uuid# |
IBeacon device UUID |
|
| driver_authorization_status |
Drive |
|
| frame_id |
Message frame ID |
|
| lls_net_number |
LLS Data Net Number
N - the LLS network address.
|
|
| lls_temperatureN |
LLS Temperature
N - the LLS network address.
|
°C |
| lls_levelN |
LLS level
N - the LLS network address.
|
|
| lls_frequency |
LLS Frequency
N - the LLS network address.
|
Hz |
| escort_fuel_d2_number |
Escort Fuel Sensor Data2 Number: 1 byte,
0 indicates an invalid number.
N - the LLS network address.
|
|
| escort_fuel_d2_fuel_level |
Escort Fuel Sensor Data2 Fuel level
N - the LLS network address.
|
|
| escort_fuel_d2_battery_voltage |
Escort Fuel Sensor Data2 Battery voltage
N - the LLS network address.
|
V |
| escort_fuel_d2_temperature |
Escort Fuel Sensor Data2 Temperature
N - the LLS network address.
|
|
| eye_sensor_realtime_mac |
Eye sensor Realtime MAC address
N - the beacon number in the queue.
|
|
| eye_sensor_rssi |
Eye sensor Realtime RSSI
N - the beacon number in the queue.
|
dBm |
| eye_sensor_temperature |
Eye sensor Realtime Temperature
N - the beacon number in the queue.
|
|
| eye_sensor_humidity |
Eye sensor Realtime Humidity
N - the beacon number in the queue.
|
|
| eye_sensor_mov_sensor_state |
Eye sensor Realtime Movement Sensor state
N - the beacon number in the queue.
|
|
| eye_sensor_mov_sensor_angle |
Eye sensor Realtime Movement sensor angle
N - the beacon number in the queue.
|
|
| eye_sensor_battery_voltage |
Eye sensor Realtime Battery Voltage
N - the beacon number in the queue.
|
mV |
| pulse_speed |
Speed line detection speed
|
km/h |
| mcu_temperature |
MCU temperature
|
°C |
| eddystone_realtime_macN |
Eddystone Realtime MAC address
N - the beacon number in the queue.
|
|
| eddystone_rssiN |
Eddystone Realtime RSSI
N - the beacon number in the queue.
|
|
| eddystone_calibrated_tx |
Eddystone Realtime Data Calibrated Tx power at 0 m
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-UID/URL/EID, otherwise is not being sent
|
|
| eddystone_namespace |
Eddystone Realtime Namespace
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-UID, otherwise is not being sent
|
|
| eddystone_instance |
Eddystone Realtime Instance ID
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-UID, otherwise is not being sent
|
|
| eddystone_rfu |
Eddystone Realtime RFU
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-UID, otherwise is not being sent
|
|
| eddystone_prefix |
Eddystone Realtime Encoded Scheme Prefix
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-URL, otherwise is not being sent
|
|
| eddystone_url |
Eddystone Realtime Encoded URL
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-URL, otherwise is not being sent
|
|
| eddystone_tlm_ver |
Eddystone Realtime TLM version
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-TML, otherwise is not being sent
|
|
| eddystone_tlm_vbatt |
Eddystone Realtime Battery voltage
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-TML, otherwise is not being sent
|
mV |
| eddystone_tlm_temp |
Eddystone Realtime Beacon temperature
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-TML, otherwise is not being sent
|
°C |
| eddystone_tlm_ad_pdu_c |
Eddystone Realtime Advertising PDU count
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-TML, otherwise is not being sent
|
|
| eddystone_tlm_on_time |
Eddystone Realtime Time since power-on or reboot
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-TML, otherwise is not being sent
|
|
| eddystone_ephemeral_id |
Eddystone Realtime Ephemeral Identifier
N - the beacon number in the queue.
Note: present only if frame type=Eddystone-EID, otherwise is not being sent
|
|
| ble_N_rssi |
BLE Relay RSSI
Where N is ID of the sensor
|
|
| ble_N_hw_ver |
BLE Relay Hardware version
Where N is ID of the sensor
|
|
| ble_N_fw_ver |
BLE Relay Firmware version
Where N is ID of the sensor
|
|
| ble_N_status |
BLE Relay activationa status
Where N is ID of the sensor
|
|
| limp_mode |
current limp mode:
bit0: 1 means speeding
bit1: 1 means speed-line disconnect
bit2: 1 means main power off
bit3: 1 means GNSS antenna disconnect
|
|
| alco_alarm |
Alcohol Breathalyzer Data Alarm level:
0 means normal,
1 means level 1,
2 means level 2….
|
|
| alco_value |
Alcohol Breathalyzer value
|
|
| alco_units |
Alcohol Breathalyzer Data Unit:
1: indicates the unit as ‰
2: indicates the unit as percentage (%)
3: indicates the unit as mg/L
4: indicates the unit as mg/100ml
|
|
| escort_N_rssi |
Escort angle sensor RSSI
Where N is the ID of the sensor
|
|
| escort_N_mode |
Escort angle sensor mode
0: Transportation
4: Vertical rotation control
5: Horizontal rotation control
6: Angle control
9: Bucket
11: Plow Where N is the ID of the sensor
|
|
| escort_N_event |
Escort angle sensor Event notification When the Sensor mode is rotation control:
0 – no rotation
1 – rotation to the left
2 – rotation to the right When the Sensor mode is angle control:
0 – the reference angle is not crossed
1 – the reference angle is crossed When the Sensor mode is bucket or plow:
0 – inactive
1 – active Where N is the ID of the sensor
|
|
| escort_N_angel |
Escort angle sensor Tile angle Where N is the ID of the sensor
|
|
| escort_N_temp |
Escort angle sensor Temperature Where N is the ID of the sensor
|
|
| escort_N_pwr_int |
Escort angle sensor Battery voltage Where N is the ID of the sensor
|
|
