eurosens_fls_detector_value# |
Detector value |
|
eurosens_dds_temp# |
Temperature |
|
rfid_number |
RFID Card number |
|
status_information |
Common status information |
|
eurosens_dds_status# |
status:
0x00: Sensor locked |
|
driver_authorization_status |
Drive |
|
trip_max_speed |
Max speed during a trip |
|
eurosens_fls_detector_fuel_volume# |
Fuel volume (0.01L / bit) |
|
eurosens_dds_battery# |
Battery charge (1% / bit) |
|
ibeacon_realtime_uuid# |
IBeacon device UUID |
|
call_type |
Incoming call alarm type |
|
engine_load_percentage_at_current_speed |
Engine load percentage at the current speed |
|
ela_sensor_#_humidity |
ELA official configuration software: humidity sensor value. Multiple sensor data can be uploaded at the same time. |
|
escort_battery_voltage |
Battery voltage of an escort sensor |
|
alco_value |
Alcohol Breathalyzer value
|
|
engine_fuel_filter |
Engine fuel filter sensor value |
|
eurosens_fls_temp# |
Temperature |
|
ibeacon_realtime_minor# |
Ibeacon device minor value |
|
ela_sensor_#_alarm_type |
ELA official configuration software: alarm type value. Multiple sensor data can be uploaded at the same time. |
|
phone_number |
Phone number |
|
ibeacon_realtime_major# |
IBeacon device major |
|
y_acceleration_value |
Y axis acceleration value |
|
alco_alarm |
Alcohol Breathalyzer Data Alarm level: 0 means normal, 1 means level 1, 2 means level 2….
|
|
ibeacon_auxiliary_major# |
IBeacon auxiliary device major number |
|
call_time |
Call log event: call time |
|
over_speeding_duration |
Duration of over speeding |
|
x_acceleration_value |
X axis acceleration value |
|
vin |
Vehicle identification number |
|
ibeacon_auxiliary_minor# |
IBeacon auxiliary device minor number |
|
photo_name |
Name of the photo which registered on the Wialon |
|
based_on_wheel_speed |
Wheel speed |
|
driver_login_status |
Status of the driver login |
|
eurosens_fls_status# |
Status: 0x00: Sensor locked 0x01: Calibration error “empty” 0x02: Calibration error “full” 0x03: Broken electrode
|
|
battery_voltage |
Battery voltage |
|
maintenance_mileage |
Mileage before maintenance |
|
current_network_format |
Current network format, possible values: 0:2G 1:3G 2:4G 3:LTE CAT-M1 4:LTE CAT-NB 255:unknow
|
|
temperature_serial |
Temperature sensor serial number |
|
ela_sensor_#_alert_type |
ELA official configuration software: alert type value. Multiple sensor data can be uploaded at the same time. |
|
operation_hours |
Operation hours |
|
remaining_fuel_volume |
Remaining fuel volume |
|
pulse_speed |
Speed line detection speed
|
|
limp_mode |
current limp mode: bit0: 1 means speeding bit1: 1 means speed-line disconnect bit2: 1 means main power off bit3: 1 means GNSS antenna disconnect
|
|
fms_firmware_version |
FMS Firmware version |
|
mcu_temperature |
MCU temperature
|
|
ela_sensor_#_temperature |
ELA official configuration software: temperature sensor value. Multiple sensor data can be uploaded at the same time. |
|
ibeacon_realtime_mac# |
IBeacon device MAC address |
|
total_vehicle_mileage |
Total vehicle mileage |
|
alco_units |
Alcohol Breathalyzer Data Unit:
1: indicates the unit as ‰ 2: indicates the unit as percentage (%) 3: indicates the unit as mg/L 4: indicates the unit as mg/100ml
|
|
eurosens_dds_axle_load# |
Axle load |
|
external_voltage |
External voltage |
|
ela_sensor_#_battery_voltage |
ELA official configuration software: battery voltage sensor value. Multiple sensor data can be uploaded at the same time. |
|
cruise_controll |
Cruise control mode status |
|
engine_torque |
Engine torque |
|
ibeacon_auxiliary_mac# |
IBeacon auxiliary MAC address |
|
axle_load |
Axle load |
|
frame_id |
Message frame ID |
|
eurosens_dds_weight# |
weight (1kg / bit) |
|
eurosens_fls_detector_fuel_percent# |
% of fuel from a full tank (0.01% / bit) |
|