GPS трекер Ruptela FM Pro3 | Интегрирован с Wialon

Особенности Ruptela FM Pro3:

Наличие черного ящика
Поддержка ГЛОНАСС
Отправка данных на несколько серверов
Встроенный одометр

Поддержано в Wialon:

Аналоговые датчики
Данные с CAN-шины
Поддержка Garmin
Управляющие команды по GPRS
Идентификация водителя
Цифровые датчики
Управляющие команды по SMS
Изменение параметра "speed"
Связь через TCP
Связь через UDP

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Ruptela FM Pro3 в диалоге настроек объекта, укажите следующие данные :

Тип устройства:	Ruptela FM Pro3
Уникальный ID:	imei

Укажите следующие параметры в конфигурационной программе или в конфигурации Ruptela FM Pro3 для использования его в Wialon Hosting :

Порт сервера:

20380

Всего в серверном центре Wialon используется 1333 объектов Ruptela FM Pro3 — это составляет 0.06% от общего количества устройств в категории «Автомобильные контролеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
avl_driver	IButton value
axle_N_weight	Axle N weight
bat_alertN	Tire N sensor battery alert. 0 - no warning, 1 - warning
battery	Battery Voltage
battery_current	Battery Current
can_acc_pedal	CANBUS AccPedal position
can_amb_air_temp	CANBUS ambient air temperature
can_axle_loc	CANBUS Axle location
can_axle_weight	CANBUS Axle1 weight
can_breaks	CANBUS BreakS
can_clutchs	CANBUS ClutchS
can_coolant_temp	CANBUS coolant temperature
can_cruisecs	CANBUS CruiseCS
can_diagnostic	CANBUS diagnostics supported
can_distance	CANBUS Distance
can_driver1_card	CANBUS driver 1 card
can_driver1_state	CANBUS driver 2 state
can_driver1_time	CANBUS driver 1 time
can_driver2_card	CANBUS driver 2 card
can_driver2_time	CANBUS driver 2 time
can_eng_hours	CANBUS Engine Hours
can_eng_plcs	CANBUS Engine PLCS
can_first_driver_id1	CANBUS First Driver Id 1
can_first_driver_id2	CANBUS First Driver Id 2
can_fms	CANBUS FMS software
can_fuel_economy	CANBUS fuel economy
can_fuel_rate	CANBUS fuel rate
can_fuel_used	CANBUS Fuel used
can_handle_inf	CANBUS handling information
can_hfrc	CANBUS HRFC
can_horas	CANBUS horas
can_over_speed	CANBUS over speed
can_pto	CANBUS PTO
can_ptostate	CANBUS PTOstate
can_request	CANBUS request supported
can_rpm	CANBUS RPM
can_second_driver_id1	CANBUS Second Driver Id 1
can_second_driver_id2	CANBUS Second Driver Id 2
can_service_dist	CANBUS service distance
can_sys_event	CANBUS system event
can_techograph	CANBUS tachograph
can_tech_org_speed	CANBUS tachograph vehicle speed
can_tech_perf	CANBUS tachograph performance
can_temp_refr	CANBUS refrigerator temperature
can_tire_loc	CANBUS Tire location
can_veh_id	CANBUS Vehicle Full Id
can_veh_id1	CANBUS Vehicle Id 1
can_veh_id2	CANBUS Vehicle Id 2
can_veh_id3	CANBUS Vehicle Id 3
can_veh_motion	CANBUS vehicle motion
can_wbspeed	CANBUS WBSpeed
com_loss_alertN	Sensor loss of communication alert. 0 - no warning, 1 - loss of communication
course_record	Course record
current_profile	Current Profile
ddd	Smart card data
distance_record	Distance record
driver_act	Driver activity
driver_status_changed	Shows if driver status has changed
driver_status	Driver status
eng_rpm_max	Engine RPM max
eng_rpm_min	Engine RPM min
eng_temp	Engine temperature
eng_temp_max	Engine temperature max
eng_temp_min	Engine temperature min
fuel_lvl	Fuel level	%
gsm_operator	GSM Operator
gsm_signal	GSM Signal Strength
harsh_braking	Harsh braking
hdop	HDOP
ID	IButton value
io_1_24	Tacho_ddd_available
io_1_25	Security_info
io_2_18	Fuel counter 1
io_2_19	Fuel counter 2
io_2_20	Fuel counter 3
io_2_21	Fuel counter 4
io_4_31	External PDFD panel info
io_caused	IO Data ID which caused record
io_N_M	Number M parameter of N bytes
last_driver_status	Last driver status
leak_alertN	Tire N leakage alert. 0 - no warning, 1 - leakage detected
modem_temp	Modem temperature
movement_sens	Movement Sensor
msg_received	Garmin text message has been received
msg_status_received	Garmin status message has been received
odometer	Virtual Odometer
pcb_temp	PCB Temperature
power	Power Supply Voltage
pr_thN	Tire N Pressure Threshold Detection. Indicates the pressure state of tire N. States: 0 - extreme over pressure, 1 - over pressure, 2 - no warning pressure, 3 - under pressure, 4 - extreme under pressure, 5 - not defined, 6 - error indicator, 7 - not available
rcu_statusN	Tire N RCU status. 0 - no warning, 1 - loss of RF reception function, 2 - loss of RS485 network communication, 4 - loss of CAN network communication
return can_direction	CANBUS direction indicator
s_modeN	Tire N sensor mode
speed_max	Max speed
speed_min	Min speed
tco_distance	TCO Dsitance
tco_driver1_card	TCO first driver card
tco_driver1_id	TCO first Driver Full ID
tco_driver1_id1	TCO first Driver ID 1
tco_driver1_id2	TCO first Driver ID 2
tco_driver1_state	TCO first driver state
tco_driver2_card	TCO second driver card
tco_driver2_id	TCO second Driver Full ID
tco_driver2_id1	TCO second Driver ID 1
tco_driver2_id2	TCO second Driver ID 2
tco_driver2_state	TCO second driver state
tco_reg_num1	TCO registration number 1
tco_reg_num2	TCO registration number 2
tco_rpm	TCO RPM
tco_trip	TCO trip
tco_veh_id	TCO Vehicle Full ID
tco_veh_id1	TCO Vehicle ID 1
tco_veh_id2	TCO Vehicle ID 2
tco_veh_id3	TCO Vehicle ID 3
tco_veh_speed	TCO vehicle speed
temp_sens_0	Temperature Sensor 0
temp_sens_1	Temperature Sensor 1
temp_sens_2	Temperature Sensor 2
temp_sens_id0	Temp sensor ID 0
temp_sens_id1	Temp sensor ID 1
temp_sens_id2	Temp sensor ID 2
time_record	Time record
tire_locN	Tire N location. The low order 4 bits represent a position number, counting left to right when facing in the direction of normal vehicle travel (forward). The high order 4 bits (MSB) represent a position number, counting front to back on the vehicle
tire_pressureN	Tire N pressure	kPa
tire_tempN	Tire N temperature	°C
t_thN	Tire N Temperature Threshold Detection. Indicates the temperature state of tire N. States: 0 - over temperature, 1 - no warning temperature, 2 - under temperature, 3 - not available / error indicator / not defined
vehicle_dist	Vehicle distance
accelerometer_x	X-axis acceleration
accelerometer_y	Y-axis acceleration
accelerometer_z	Z-axis acceleration
engine_on	ECO engine on timer (IO 139)	s

В поле "Уникальный ID" нужно ввести IMEI без начального 0.

Можно подключить устройство Garmin для общения с водителем.
Версия прошивки Garmin должна быть 5.40 или выше.
Версия прошивки Ruptela FM Pro3 должна быть 03.00.01 или выше.

Пример настроек объекта в системе Wialon использующего Ruptela FM Pro3. При создании объекта выберите "Импорт из файла", далее этот файл и все секции для загрузки. Создастся уже настроенный объект с несколькими датчиками. Не забудьте указать уникальный Id Вашего устройства.