OBD трекер Concox JM-VG02U | Интегрирован с Wialon

Особенности Concox JM-VG02U:

Наличие черного ящика
Поддержка ГЛОНАСС

Поддержано в Wialon:

Изменение параметра "speed"

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Concox JM-VG02U в диалоге настроек объекта, укажите следующие данные :

Тип устройства:	Concox JM-VG02U
Уникальный ID:	imei

Укажите следующие параметры в конфигурационной программе или в конфигурации Concox JM-VG02U для использования его в Wialon Hosting :

Порт сервера:

22009

Всего в серверном центре Wialon используется 68 объектов Concox JM-VG02U — это составляет 0.08% от общего количества устройств в категории «OBD трекеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
encoding	0X01: UTF-8 0x02: ASCII;
rssi	LBS Main Cell Tower, rssi
mnc	Mobile Network Code
status_reg_content	Report status: Trigger content
gsm	GSM signal strength degree
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
temp	Fuel temperature
battery_vol	Battery Voltage
content	the command response content
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
mileage	Mileage statistics
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
battery	Fuel level battery value
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
pwr_int	Battery voltage(mV)
gps_time_status	GPS is Real Time or Reupload
iccid	iccid number
sensor_percent	Fuel level in percent
imei	imei number
mcc	Mobile Country Code
cell_id	Cell Tower ID
visible_sats	Visible satellites
door	Door status
sequence_num	Sequence Number
gsm_signal_csq	GSM Signal CSQ
pwr_ext	Voltage level
acc	ACC Status. ACC low: 0, ACC high: 1
hdop	HDOP
time	Time stamp
odometer	Odometer
status_trig_time1	Report status: Trigger time
lac	Location Area Code
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
boot_reason	Boot Reason
imsi	imsi number
sats	Number of satellites
server_flag	It refers to the data to send (by the coding format);

Имя параметра

Описание

Единицы измерения

encoding

0X01: UTF-8
0x02: ASCII;

rssi

LBS Main Cell Tower, rssi

mnc

Mobile Network Code

status_reg_content

Report status: Trigger content

gsm

GSM signal strength degree

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

temp

Fuel temperature

battery_vol

Battery Voltage

content

the command response content

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

mileage

Mileage statistics

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

battery

Fuel level battery value

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

pwr_int

Battery voltage(mV)

gps_time_status

GPS is Real Time or Reupload

iccid

iccid number

sensor_percent

Fuel level in percent

imei

imei number

mcc

Mobile Country Code

cell_id

Cell Tower ID

visible_sats

Visible satellites

door

Door status

sequence_num

Sequence Number

gsm_signal_csq

GSM Signal CSQ

pwr_ext

Voltage level

acc

ACC Status. ACC low: 0, ACC high: 1

hdop

HDOP

time

Time stamp

odometer

Odometer

status_trig_time1

Report status: Trigger time

lac

Location Area Code

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

boot_reason

Boot Reason

imsi

imsi number

sats

Number of satellites

server_flag

It refers to the data to send (by the coding format);

Wialon: комплексная платформа для разнообразных задач

Concox JM-VG02U

Другие устройства производителя

Развивайте бизнес вместе с нами

Станьте партнером Wialon

Выберите поставщика Wialon