Localizador GPS de activos GPS Padlock G-320

Características GPS Padlock G-320:

4G/LTE
Caja negra
BLE
E-seal

Para que el sistema de rastreo Wialon identifique los datos de GPS Padlock G-320 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	GPS Padlock G-320
ID único:	serial

Indique los siguientes parámetros en el programa de configuración o en la configuración GPS Padlock G-320 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22336

En el centro de servicio Wialon se utilizan 0 unidades GPS Padlock G-320 — es 0% de la cantidad total de dispositivos Rastreador de activos conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
alarm_flag	Alarm (bitwise parameter, 1 - active, 0 - not active): bit2 - Over Speed bit3 - Fatigue Driving bit5 - GNSS module malfunction bit6 - GNSS antenna disconnection bit7 - GNSS antenna short-circuit bit8 - Device low battery bit9 - Device power down bit20 - Over time Parking
state_flag	Status (bitwise parameter): bit1 - 0: ACC OFF; 1: ACC ON (ACC mean car engine) bit2 - 0: No Position, 1: Positioned bit3 - 0: North Latitude; 1: South Latitude bit4 - 0: East Longitude; 1: West Longitude
mileage	Mileage	km
lock_st	Lock Status: 1 - Close (Bracket in the hole) 0 - Open (Bracket out from hole)
seal_st	Seal Status: 1 - Seal 0 - Unseal
pwr_int	Battery voltage	V
tear_dw_st	Tear Down Status: 0 - Normal (lock body not be opened); 1 - Been tear down
rp_rs	Report Reason: 0 - Scheduled report 1 - Lock status changed 2 - Tear Down Status Changed 3 - Press Seal 4 - RFID Seal 5 - RFID Unseal 6 - SMS Seal 7 - SMS Unseal 8 - Low battery and sleep 9 - Invalid Card Seal A - Invalid Card Unseal B - Valid Card Seal C - Valid Card Unseal D - NFC Seal E - NFC Unseal F - Platform Seal G - Platform Unseal H - Invalid Card Close (When unseal, this card close physical lock) I - Invalid Card Open (When unseal, this card open physical lock) J - Valid Card Close (Similar with H) K - Valid Card Open L - Sub-lock (bracket) be opened in seal condition M - Sub-lock tear down (lock body be opened) in seal condition N - Sub-lock communication time out O - Sub-lock status changed P - Card Seal in illegal area Q - Card Unseal in illegal area R - Auto Unseal in designated area S - Auto seal in designated area T - Emergency password unseal
op_id	Operate ID
s_lock_stN	Sub-lock status with N number: 0 - Unbind 1 - Bind 2 - Status OFF 3 - Status ON 4 - Damaged 5 - Communicate Over Time
usr_b_id	User Business ID
cmd_name	Command name
cmd_result	Result of command
sublockN_id	Bound sub-lock
sublockN_battery	Sub-lock battery voltage	V
sublockN_status	Sub-lock status: 0 - Unseal 1 - Seal
shackleN_status	Shackle status: 0 - Bound 2 - Shackle close 3 - Shackle open 4 - Lock been tampered 5 - Communication timeout 6 - Shackle been cut

Nombre del parámetro

Descripción

Unidades de medida

alarm_flag

Alarm (bitwise parameter, 1 - active, 0 - not active):
bit2 - Over Speed
bit3 - Fatigue Driving
bit5 - GNSS module malfunction
bit6 - GNSS antenna disconnection
bit7 - GNSS antenna short-circuit
bit8 - Device low battery
bit9 - Device power down
bit20 - Over time Parking

state_flag

Status (bitwise parameter):

bit1 - 0: ACC OFF; 1: ACC ON (ACC mean car engine)

bit2 - 0: No Position, 1: Positioned

bit3 - 0: North Latitude; 1: South Latitude

bit4 - 0: East Longitude; 1: West Longitude

mileage

Mileage

lock_st

Lock Status:
1 - Close (Bracket in the hole)
0 - Open (Bracket out from hole)

seal_st

Seal Status:
1 - Seal
0 - Unseal

pwr_int

Battery voltage

tear_dw_st

Tear Down Status:
0 - Normal (lock body not be opened);
1 - Been tear down

rp_rs

Report Reason:
0 - Scheduled report
1 - Lock status changed
2 - Tear Down Status Changed
3 - Press Seal
4 - RFID Seal
5 - RFID Unseal
6 - SMS Seal
7 - SMS Unseal
8 - Low battery and sleep
9 - Invalid Card Seal
A - Invalid Card Unseal
B - Valid Card Seal
C - Valid Card Unseal
D - NFC Seal
E - NFC Unseal
F - Platform Seal
G - Platform Unseal
H - Invalid Card Close (When unseal, this card close physical lock)
I - Invalid Card Open (When unseal, this card open physical lock)
J - Valid Card Close (Similar with H)
K - Valid Card Open
L - Sub-lock (bracket) be opened in seal condition
M - Sub-lock tear down (lock body be opened) in seal condition
N - Sub-lock communication time out
O - Sub-lock status changed
P - Card Seal in illegal area
Q - Card Unseal in illegal area
R - Auto Unseal in designated area
S - Auto seal in designated area
T - Emergency password unseal