Localizador GPS de activos MettaX MA403

Características MettaX MA403:

4G/LTE
Soporta GLONASS

Soportado en Wialon:

Gestión remota vía GPRS
Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de MettaX MA403 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	MettaX MA403
ID único:	Last 10 digits of IMEI

Indique los siguientes parámetros en el programa de configuración o en la configuración MettaX MA403 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22621

En el centro de servicio Wialon se utilizan 0 unidades MettaX MA403 — es 0% de la cantidad total de dispositivos Rastreador de activos conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
param_id_#	Parameter value
event_#	Event
alarm_flag	Alarm flag (Bits1-32): Bit1: 1: Emergency alarm, trigger after triggering alarm switch Bit2: 1: Over speed alarm Bit3: 1: Driving alarm malfunction Bit4: 1: Risk warning Bit5: 1: GNSS module malfunction Bit6: 1: GNSS antenna was notconnected or cut Bit7: 1: GNSS antenna short circuited Bit8: 1: The terminal main power undervoltage Bit9: 1: The terminal main power is turned off Bit10: 1: Terminal LCD or displaymalfunction Bit11: 1: TTS module malfunction Bit12: 1: Camera malfunction Bit13: 1: Road transportcertificate IC card module malfunction Bit14: 1: Over speed warning Bit15: 1: Fatigue driving warning Bit16-Bit18: Reserve Bit19: 1: The accumulated overspeed driving time of the day Bit20: 1: Timeout parking Bit21: 1: Enter and exit the area Bit22: 1: Enter and exit the route Bit23: 1: The driving time of theroute is not enough/too long Bit24: 1: Off track alarm Bit25: 1: Vehicle VSS malfunction Bit26: 1: Abnormal fuel capacityof vehicle Bit27: 1: The vehicle is stolen(through vehicle burglar alarm) Bit28: 1: Illegal ignition of vehicle Bit29: 1: Illegal displacement ofvehicle Bit30: 1: Collision warning Bit31: 1: Rollover warning Bit32: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)
state_flag	Status (Bits 1-32): Bit1: 0: ACC off; 1: ACC on Bit2: 0: Not positioning; 1: Positioning Bit3: 0: North latitude; 1: South latitude Bit4: 0: East longitude; 1: West longitude Bit5: 0: Running status; 1: Stop running status Bit6: 0: Latitude and longitude are not encrypted by secret plug-ins; 1: Latitude and longitude are encrypted by secret plug-ins Bit7-Bit8: Reserve Bit9-Bit10: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load (It can be used for empty/heavy passenger car and empty/full load status of the truck, manual input or sensor acquisition) Bit11: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect Bit12: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect Bit13: 0: Vehicle door unlocked; 1: Vehicle door locked Bit14: 0: Door 1 close; 1: Door 1 open (front door) Bit15: 0: Door 2 close; 1: Door 2 open (middle door) Bit16: 0: Door 3 close; 1: Door 3 open (back door) Bit17: 0: Door 4 close; 1: Door 4 open (door of driver’s seat) Bit18: 0: Door 5 close; 1: Door 5 open (user-defined) Bit19: 0: No GPS positioning; 1: GPS positioning Bit20: 0: No Beidou positioning; 1: Beidou positioning Bit21: 0: No GLONASS positioning; 1: GLONASS positioning Bit22: 0: No Galileo positioning; 1: Galileo positioning Bit23-32: Reserve
odometer	Odometer
fuel_volume	Fuel volume
speed_drvng_rec	Speed driving rec
alarm_event_id	Alarm event ID
overspeed_alarm	Overspeed alarm
position_type	Position type
section_id	Section ID
route_alarm	Route alarm
direction	Direction
driving_time_alarm	Driving time alarm
driving_time	Driving time
driving_results	Driving results
veh_signal_status	Veh. signal status
user_msg	User mesage
veh_stat	Vehicle status, the same as state_flag
info_id	Additional information ID 0x64 - driving assist warning information 0x65 - driver behavior monitoring function warning information 0x70 - violent driving warning information 0x14 - Video-related alarm 0x15 - Video signal loss alarm 0x16 - Video signal blockage alarm 0x17 - Memory fault alarm 0x18 -Driving behavior alarm
alm_time	Alarm time threshold	sec
alm_thre1	Warning threshold 1 When alm_type is 0x01~0x03, this bit is warning gravity acceleration threshold in 1/100g; when alm_type is 0x04~0x07, this bit is warning speed threshold in km/h.
alm_thre2	Warning threshold 2 This bit is reserved when alm_type is 0x01~0x03; when alm_type is 0x04~0x07, this bit is warning engine speed threshold in RPM.
workstate	Workstate, 0x01: normal work 0x02: standby mode 0x03: Upgrade maintenance 0x04: Device is abnormal 0x10: Disconnect
alarm_status	Alarm status, bits(1-32) Bitwise setting: 0 means no, 1 means yes bit1: cameraabnormal bit2: Main memory exception bit3: Auxiliary memory exception bit4: Infrared fill light is abnormal bit5: abnormal speaker bit6: Abnormal battery bit7~bit10:reserved bit11: Communication module error bit12: The positioning module is abnormal bit13~bit32:reserved
alm_lvl	Warning level: 0x01: Level 1 warning 0x02: Level 2 warning
alm_id	According to the warning sequence, starting from 0 and accumulates circularly, without distinguishing warning types.
sign_stat	Sign status. 0x00: Not available 0x01: Start sign 0x02: End sign This field is only applicable to warnings or events with start and end sign types.
dev_type	Deviation type: 0x01: Left deviation 0x02: Right deviation Only valid when warning type is 0x02, fill in 0x00 when unavailable.

Nombre del parámetro

Descripción

Unidades de medida

param_id_#

Parameter value

event_#

Event

alarm_flag

Alarm flag (Bits1-32):

Bit1: 1: Emergency alarm, trigger after triggering alarm switch

Bit2: 1: Over speed alarm

Bit3: 1: Driving alarm malfunction

Bit4: 1: Risk warning

Bit5: 1: GNSS module malfunction

Bit6: 1: GNSS antenna was notconnected or cut

Bit7: 1: GNSS antenna short circuited

Bit8: 1: The terminal main power undervoltage

Bit9: 1: The terminal main power is turned off

Bit10: 1: Terminal LCD or displaymalfunction

Bit11: 1: TTS module malfunction

Bit12: 1: Camera malfunction

Bit13: 1: Road transportcertificate IC card module malfunction

Bit14: 1: Over speed warning

Bit15: 1: Fatigue driving warning

Bit16-Bit18: Reserve

Bit19: 1: The accumulated overspeed driving time of the day

Bit20: 1: Timeout parking

Bit21: 1: Enter and exit the area

Bit22: 1: Enter and exit the route

Bit23: 1: The driving time of theroute is not enough/too long

Bit24: 1: Off track alarm

Bit25: 1: Vehicle VSS malfunction

Bit26: 1: Abnormal fuel capacityof vehicle

Bit27: 1: The vehicle is stolen(through vehicle burglar alarm)

Bit28: 1: Illegal ignition of vehicle

Bit29: 1: Illegal displacement ofvehicle

Bit30: 1: Collision warning

Bit31: 1: Rollover warning

Bit32: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)

state_flag

Status (Bits 1-32):

Bit1: 0: ACC off; 1: ACC on

Bit2: 0: Not positioning; 1: Positioning

Bit3: 0: North latitude; 1: South latitude

Bit4: 0: East longitude; 1: West longitude

Bit5: 0: Running status; 1: Stop running status

Bit6: 0: Latitude and longitude are not encrypted by secret plug-ins; 1:

Latitude and longitude are encrypted by secret plug-ins

Bit7-Bit8: Reserve

Bit9-Bit10: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load

(It can be used for empty/heavy passenger car and empty/full load

status of the truck, manual input or sensor acquisition)

Bit11: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect

Bit12: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect

Bit13: 0: Vehicle door unlocked; 1: Vehicle door locked

Bit14: 0: Door 1 close; 1: Door 1 open (front door)

Bit15: 0: Door 2 close; 1: Door 2 open (middle door)

Bit16: 0: Door 3 close; 1: Door 3 open (back door)

Bit17: 0: Door 4 close; 1: Door 4 open (door of driver’s seat)

Bit18: 0: Door 5 close; 1: Door 5 open (user-defined)

Bit19: 0: No GPS positioning; 1: GPS positioning

Bit20: 0: No Beidou positioning; 1: Beidou positioning

Bit21: 0: No GLONASS positioning; 1: GLONASS positioning

Bit22: 0: No Galileo positioning; 1: Galileo positioning

Bit23-32: Reserve

odometer

Odometer

fuel_volume

Fuel volume

speed_drvng_rec

Speed driving rec

alarm_event_id

Alarm event ID

overspeed_alarm

Overspeed alarm

position_type

Position type

section_id

Section ID

route_alarm

Route alarm

direction

Direction

driving_time_alarm

Driving time alarm

driving_time

Driving time

driving_results

Driving results

veh_signal_status

Veh. signal status

user_msg

User mesage

veh_stat

Vehicle status, the same as state_flag

info_id

Additional information ID

0x64 - driving assist warning information
0x65 - driver behavior monitoring function warning information
0x70 - violent driving warning information
0x14 - Video-related alarm
0x15 - Video signal loss alarm
0x16 - Video signal blockage alarm
0x17 - Memory fault alarm
0x18 -Driving behavior alarm

alm_time

Alarm time threshold

sec

alm_thre1

Warning threshold 1

When alm_type is 0x01~0x03, this bit is warning gravity acceleration threshold in 1/100g; when alm_type is 0x04~0x07, this bit is warning speed threshold in km/h.

alm_thre2

Warning threshold 2

This bit is reserved when alm_type is 0x01~0x03; when alm_type is 0x04~0x07, this bit is warning engine speed threshold in RPM.

workstate

Workstate,

0x01: normal work

0x02: standby mode

0x03: Upgrade maintenance

0x04: Device is abnormal

0x10: Disconnect

alarm_status

Alarm status, bits(1-32)

Bitwise setting: 0 means no, 1 means yes

bit1: cameraabnormal

bit2: Main memory exception

bit3: Auxiliary memory exception

bit4: Infrared fill light is abnormal

bit5: abnormal speaker

bit6: Abnormal battery

bit7~bit10:reserved

bit11: Communication module error

bit12: The positioning module is abnormal

bit13~bit32:reserved

alm_lvl

Warning level:

0x01: Level 1 warning
0x02: Level 2 warning

alm_id

According to the warning sequence, starting from 0 and accumulates circularly, without distinguishing warning types.

sign_stat

Sign status.

0x00: Not available
0x01: Start sign
0x02: End sign

This field is only applicable to warnings or events with start and end sign types.

dev_type

Deviation type:

0x01: Left deviation
0x02: Right deviation
Only valid when warning type is 0x02, fill in 0x00 when unavailable.

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Products

Soluciones de nicho para satisfacer las tareas específicas

MettaX MA403

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Hacerse socio

Solicite Wialon en su región

Por favor, llene la solicitud para iniciar el trabajo con Wialon