Localizador GPS AR Series | Integrado con Wialon

Soportado en Wialon:

Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de AR Series en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	AR Series
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración AR Series para utilizarlos en Wialon Hosting :

Puerto del servidor:

21126

En el centro de servicio Wialon se utilizan 1019 unidades AR Series — es 0.04% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
hdop	An indication of the quality of the received signal
rssi	Relative indication of the RF signal strength seen by the device
main_pwr	Indicates the voltage of the power source	10 mV
backup_pwr	Indicates the voltage of a secondary power source	10 mV
gpio_status	GPIO Status
gpio_dir	GPIO Direction
odometer	Odometer	km
baseband_ver	Indicates the software release version of the baseband subsystem.
app_ver	Indicates the current release of the application running on a given device.
assembly	Board assembly
rev	Indicates the revision of the assembly
io_ver	Indicates the software release version of the I/O processor
change_bit	Is set if the original configuration has been altered with one or more user commands
conf_num	Indicates the version of the configuration installed on the device
event	1 - Power-Up (Power up report) 2 - Heart Beat (Periodic report) 3 - BuB Heart Beat (Periodic report when running from backup battery) 4 - BuB On (Switched to backup battery (main power loss)) 5 - BuB Off (Switched back from BuB to main power) 6 - Power Drop (External power dropped below +XPWL threshold) 7 - Power Restore (External power raised above +XPWL threshold) 12 - Relay High (RLY state changed from 0 → 1) 13 - Relay Low (RLY state changed from 1 → 0) 14 - Ignition High (Ignition state changed from low → high) 15 - Ignition Low (Ignition state changed from high → low) 16 - GPS Locked (Valid GPS) 17 - GPS Unlocked (Invalid GPS) 18 - IP Changed (Local IP address changed) 19 - Speeding Start (Speed raised above specified threshold) 20 - Speeding Stop (Speed dropped below specified threshold) 22 - Drive Trip - Start (Trip Started) 23 - Drive Trip - End (Trip Ended) 24 - Moving (Recurring event while in “trip” and moving) 25 - Stopped (Recurring event while stopped) 26 - Heading Change (Changed heading by a specified degree while in “trip”) 27 - Drive Distance (Recurring event passing specified distance while in “trip”) 28 - Tow Alert (Vehicle moving with ignition off) 30 - Idling Alert (Vehicle is Idle) 31 - Now Report (Response to Report Now command) 32 - Periodic Reset (Scheduled “reset” took place) 33 - Trip Odometer (Virtual Trip Odometer reached specified threshold) 34 - Maintenance (Maintenance Periodic Report) 37 - GP1 High (GP1 state changed from 0 → 1) 38 - GP1 Low (GP1 state changed from 1 → 0) 39 - GP2 High (GP2 state changed from 0 → 1) 40 - GP2 Low (GP2 state changed from 1 → 0) 41 - GP3 High (GP3 state changed from 0 → 1) 42 - GP3 Low (GP3 state changed from 1 → 0) 43 - GP4 High (GP4 state changed from 0 → 1) 44 - GP4 Low (GP4 state changed from 1 → 0) 64 - Power Save (External power dropped below +XPWS threshold) 65 - Power Normal (External power raised above +XPWS threshold) 96-111 - Geo-Fence Enter (Second digit of event indicates geo-fence number) 112-127 - Geo-Fence Exit (Second digit of event indicates geo-fence number)

All device models 2G, 3G, CDMA are supported.

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Products

Soluciones de nicho para satisfacer las tareas específicas

AR Series

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Hacerse socio

Solicite Wialon en su región

Por favor, llene la solicitud para iniciar el trabajo con Wialon