Localizador GPS HeroX 100 | Integrado con Wialon

Características HeroX 100:

2G
4G/LTE
Caja negra
BLE
Odómetro incorporado

Soportado en Wialon:

Acelerómetro
Sensores ADC
Gestión remota vía GPRS
Sensores Digitales
Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de HeroX 100 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	HeroX 100
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración HeroX 100 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22708

En el centro de servicio Wialon se utilizan 97 unidades HeroX 100 — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
sf_vers	Software version of the hardware
fw_vers	Firmware version of the hardware
platform	Platform version of the hardware
hw_vers	Hardware version
acc_on	Ignition ON Upload Interval	seconds
acc_off	Ignition OFF Upload Interval	seconds
angle	Angle Upload Interval	degrees
distance	Distance upload interval	m
gps_data	Bitwise variable, in which each bit means following: Bit7=0, realtime data; Bit7=1, history data Bit6=0, LBS data; Bit6=1, GNSS data Bit5=0, GNSS is in working mode. Bit5=1, GNSS is in sleeping mode Bit4~Bit0, locked satellite count
speed_alarm	Over speed alarm setting	km\h
gsensor	Bitwise variable in which each bit means following: Bit7~Bit4, total 16 different gsensor sensitivity for move. Bit3~Bit0, show 4 managers status (set or not) Value=1, manger is set; Value=0, manager is null
heartbeat_int	Sending interval of heartbeat package	minutes
relay	Relay status, which is bitwise variable Bit7 (command type received): 0: device received the engine recover command 1: device received the engine cut command Bit6 (engine cut execution status): 0: engine cut failed because gps not fix or speed more than 20 km\h 1: engine cut ok Bit 5 & Bit4 (rly mode): 00: rlymode = 0 10: rlymode = 1 01: rlymode = 2 11: rlymode = 3~255 Bit3~Bit 0 (buld in alarm SMS language): 0: Chinese 1: English 2: French 3: Spanish 4: German 5: Portuguese 6: Arabic 7: Indonesian 8: Russain 9: Turkish
drag_alarm	Bitwise variable, each byte means following: 1.Bit15~Bit0. The range is 0~65535 2. Value(Bit15~Bit0)=0, the drag alarm is disabled 3. Once the alarm is set and enabled, when device detected the ignition status changed from ON to OFF, the alarm will automatically become effective.
1wire_device_type	Device Type indicates the type of the 1-wire device. It currently supports below 1-wire device types: 0: 1-Wire RFID Reader 1: iButton Reader 40: Temp Sensor 46: Temp & Humi Sensor
fms_speed	Vehicle speed read via FMS
fms_coolant_temp	FMS data temperature of the Coolant liquid
fms_fuel_percentage	Remaining fuel volume, percentage
fms_eng_payload	Engine load, percent
fms_accumulated_fuel_cons	Accumulated fuel volume
overspeed	Over speed alarm
rssi	Network signal strength
gsensor_sens	Gsensor status
manager_status	Manager status
other	Others: Bit7: lock SIM card; Value=1, locked; Value=0, unlocked Bit6: lock device; value=1, locked; value=0, unlocked Bit5 always =0, no specific meaning Bit4: antitheft alarm; value=1, enabled, value=0, disabled
digital_io	Digital I/O Status
ign	Ignition
digital_out	Digital Out Status
adcN	Analog Input N
alarm	Alarm Type
odometer	Odometer
battery	Build in Battery
battery_monitoring	Build in Battery bit15: always in 0, it stands for it's a rechargeable battery device bit14~bit0: When bit15=0，it stands for how long the device is in the low battery mode.
temp_int	Device Internal Temperature (℃)
rpm	Revolutions Per Minites

Nombre del parámetro

Descripción

Unidades de medida

sf_vers

Software version of the hardware

fw_vers

Firmware version of the hardware

platform

Platform version of the hardware

hw_vers

Hardware version

acc_on

Ignition ON Upload Interval

seconds

acc_off

Ignition OFF Upload Interval

seconds

angle

Angle Upload Interval

degrees

distance

Distance upload interval

gps_data

Bitwise variable, in which each bit means following:

Bit7=0, realtime data; Bit7=1, history data
Bit6=0, LBS data; Bit6=1, GNSS data
Bit5=0, GNSS is in working mode. Bit5=1, GNSS is in sleeping mode
Bit4~Bit0, locked satellite count

speed_alarm

Over speed alarm setting

km\h

gsensor

Bitwise variable in which each bit means following:

Bit7~Bit4, total 16 different gsensor sensitivity for move.
Bit3~Bit0, show 4 managers status (set or not)
Value=1, manger is set; Value=0, manager is null

heartbeat_int

Sending interval of heartbeat package

minutes

relay

Relay status, which is bitwise variable

Bit7 (command type received):
- 0: device received the engine recover command
- 1: device received the engine cut command

Bit6 (engine cut execution status):
- 0: engine cut failed because gps not fix or speed more than 20 km\h
- 1: engine cut ok
Bit 5 & Bit4 (rly mode):
- 00: rlymode = 0
- 10: rlymode = 1
- 01: rlymode = 2
- 11: rlymode = 3~255
Bit3~Bit 0 (buld in alarm SMS language):
- 0: Chinese
- 1: English
- 2: French
- 3: Spanish
- 4: German
- 5: Portuguese
- 6: Arabic
- 7: Indonesian
- 8: Russain
- 9: Turkish

drag_alarm

Bitwise variable, each byte means following:

1.Bit15~Bit0. The range is 0~65535
2. Value(Bit15~Bit0)=0, the drag alarm is disabled
3. Once the alarm is set and enabled, when device detected the ignition status changed from ON to OFF, the alarm will automatically become effective.

1wire_device_type

Device Type indicates the type of the 1-wire device. It currently supports below 1-wire device types:

0: 1-Wire RFID Reader
1: iButton Reader
40: Temp Sensor
46: Temp & Humi Sensor

fms_speed

Vehicle speed read via FMS

fms_coolant_temp

FMS data temperature of the Coolant liquid

fms_fuel_percentage

Remaining fuel volume, percentage

fms_eng_payload

Engine load, percent

fms_accumulated_fuel_cons

Accumulated fuel volume

overspeed

Over speed alarm

rssi

Network signal strength

gsensor_sens

Gsensor status

manager_status

Manager status

other

Others:

Bit7: lock SIM card; Value=1, locked; Value=0, unlocked
Bit6: lock device; value=1, locked; value=0, unlocked
Bit5 always =0, no specific meaning
Bit4: antitheft alarm; value=1, enabled, value=0, disabled

digital_io

Digital I/O Status

ign

Ignition

digital_out

Digital Out Status

adcN

Analog Input N

alarm

Alarm Type

odometer

Odometer

battery

Build in Battery

battery_monitoring

Build in Battery

bit15: always in 0, it stands for it's a rechargeable battery device
bit14~bit0: When bit15=0，it stands for how long the device is in the low battery mode.

temp_int

Device Internal Temperature (℃)

rpm

Revolutions Per Minites

Por favor, llene la solicitud para iniciar el trabajo con Wialon