Localizador GPS de activos DecoyX 100

Características DecoyX 100:

4G/LTE
Caja negra
Posicionamiento Wi-Fi

Soportado en Wialon:

Gestión remota vía GPRS
LBS
Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de DecoyX 100 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	DecoyX 100
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración DecoyX 100 para utilizarlos en Wialon Hosting :

Puerto del servidor:

23013

En el centro de servicio Wialon se utilizan 0 unidades DecoyX 100 — es 0% de la cantidad total de dispositivos Rastreador de activos conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
mcu_model	MCU model
mcu_fw_ver	MCU firmware version
modem_ver	Modem version
modem_app	Modem app version
hw_ver	Hardware version
gnss_status	Data and GNSS status (Bits 1-8) 1. Bit8=0, realtime data; Bit8=1, history data 2. Bit7=0, LBS data; Bit7=1, GNSS data 3. Bit6=0, GNSS is in working mode. Bit6=1,GNSS is in sleeping mode 4. Bit5-Bit1, locked satellite count
alarm	Alarm code
acc_z	Acceleration Value	g
acc_y	Acceleration Value	g
acc_x	Acceleration Value	g
battery_percent	Build in Battery Voltage (%)
temp	Device Internal Temperature (℃)
front_light	Front Light Sensor Voltage	V
solar_voltage	Solar Panel Voltage	V
odom	Odometer (Meter)
status	Status (Bits 1-16) 1. Bit16= 1, USB cable connected(with power), Bit16 =0, USB cable disconnected(without power) 2. Bit15~Bit12 show 4 manager phone number set or not. (1=set, 0=not) 4. Bit 11~Bit5, Network signal strength. Range: 0~100 5. Bit4=1, solar panel is charging the battery, Bit4=0, solar panel doesn't charge the battery 6. Bit3=1, ignition on (moving), Bit3=0, ignition off (standstill) 7. Bit2=1 (Xtra Yes), Bit2=0 (Xtra No) 8. Bit1=0, normal timer reporting (TLP1-LF, TLP1-SF & TLP1-P), Bit1=1, smartpower timer reporting (TLP1-LF, TLP1-SF & TLP1-P)
acc_on	Igniton ON Upload Interval(Second)
acc_off	Ignition OFF or Accdet=0 Upload Interval (Second)
angle	Angle Upload Interval (Degree)
distance	Distance Upload Interval (Meter)
heart	Heartbeat (Minute)
settings_status	Current Setting Status Informaiton(1) (Bits 1-8) 1. Bit8: lock SIM card setting status, Bit8=1, locked, Bit8=0, unlocked 2. Bit7: lock device setting status, Bit7=1, locked, Bit7=0, unlocked 3. Bit6: AGPS Ephemeris data download setting status, Bit6=1, enable download, Bit6=0, disable download 4. Bit5:G-sensor setting status, Bit5=1 enable, Bit5=0, disable 5. Bit4: front sensor setting status, Bit4=1, enable, Bit4=0, disable 7. Bit2: open case alarm setting status,Bit2=1, enable, Bit2=0, disable 8.Bit1: device internal temperature reading and uploading setting status, Bit1=1, enable, Bit1=0, disable
network_operator	Network Operators Name
access_name	Access Technology Name
band_name	Band Name
imsi	SIM Card IMSI
iccid	ICCID
mnc	Mobile Network Code
mcc	Mobile Country Code
lac	Location Area Code
cell_id	Cell Tower ID
network_signal	Network signal strength. Range: 0~100
pwr_int	Internal Battery Voltage	V
charge_st	Charging status (Bits 1-16) Bit16=1, non-rechargeable battery; Bit16=0, rechargeable battery Bits 1-15: when Bit16=0, how long the tracker is not charging; when Bit16=1, count of position and alarm messages sent at low battery voltage
lock_st	Lock status code 0x00 - locked, 0x01 - rope cut 0x11-0x17 - NFC, 0x21-0x27 - network, 0x31-0x37 - BLE app, 0x41-0x47 - SMS, 0x51-0x57 - USB lock and unlock results
ssid	WiFi SSID
mac	WiFi MAC address
device_wifi_mac	WiFi MAC address of the device
wifi_mac_#	WiFi access point MAC address, # - access point number
wifi_rssi_#	WiFi access point RSSI, # - access point number	dBm

Nombre del parámetro

Descripción

Unidades de medida

mcu_model

MCU model

mcu_fw_ver

MCU firmware version

modem_ver

Modem version

modem_app

Modem app version

hw_ver

Hardware version

gnss_status

Data and GNSS status (Bits 1-8)

1. Bit8=0, realtime data; Bit8=1, history data

2. Bit7=0, LBS data; Bit7=1, GNSS data

3. Bit6=0, GNSS is in working mode. Bit6=1,GNSS is in sleeping mode

4. Bit5-Bit1, locked satellite count

alarm

Alarm code

acc_z

Acceleration Value

acc_y

Acceleration Value

acc_x

Acceleration Value

battery_percent

Build in Battery Voltage (%)

temp

Device Internal Temperature (℃)

front_light

Front Light Sensor Voltage

solar_voltage

Solar Panel Voltage

odom

Odometer (Meter)

status

Status (Bits 1-16)

1. Bit16= 1, USB cable connected(with power), Bit16 =0, USB cable disconnected(without power)

2. Bit15~Bit12 show 4 manager phone number set or not. (1=set, 0=not)

4. Bit 11~Bit5, Network signal strength. Range: 0~100

5. Bit4=1, solar panel is charging the battery, Bit4=0, solar panel doesn't charge the battery

6. Bit3=1, ignition on (moving), Bit3=0, ignition off (standstill)

7. Bit2=1 (Xtra Yes), Bit2=0 (Xtra No)

8. Bit1=0, normal timer reporting (TLP1-LF, TLP1-SF & TLP1-P), Bit1=1, smartpower timer reporting (TLP1-LF, TLP1-SF & TLP1-P)

acc_on

Igniton ON Upload Interval(Second)

acc_off

Ignition OFF or Accdet=0 Upload Interval (Second)

angle

Angle Upload Interval (Degree)

distance

Distance Upload Interval (Meter)

heart

Heartbeat (Minute)

settings_status

Current Setting Status Informaiton(1) (Bits 1-8)

1. Bit8: lock SIM card setting status, Bit8=1, locked, Bit8=0, unlocked

2. Bit7: lock device setting status, Bit7=1, locked, Bit7=0, unlocked

3. Bit6: AGPS Ephemeris data download setting status, Bit6=1, enable download, Bit6=0, disable download

4. Bit5:G-sensor setting status, Bit5=1 enable, Bit5=0, disable

5. Bit4: front sensor setting status, Bit4=1, enable, Bit4=0, disable

7. Bit2: open case alarm setting status,Bit2=1, enable, Bit2=0, disable

8.Bit1: device internal temperature reading and uploading setting status, Bit1=1, enable, Bit1=0, disable

network_operator

Network Operators Name

access_name

Access Technology Name

band_name

Band Name

imsi

SIM Card IMSI

iccid

ICCID

mnc

Mobile Network Code

mcc

Mobile Country Code

lac

Location Area Code

cell_id

Cell Tower ID

network_signal

Network signal strength. Range: 0~100

pwr_int

Internal Battery Voltage

charge_st

Charging status (Bits 1-16)

Bit16=1, non-rechargeable battery; Bit16=0, rechargeable battery

Bits 1-15: when Bit16=0, how long the tracker is not charging; when Bit16=1, count of position and alarm messages sent at low battery voltage

lock_st

Lock status code

0x00 - locked, 0x01 - rope cut

0x11-0x17 - NFC, 0x21-0x27 - network, 0x31-0x37 - BLE app, 0x41-0x47 - SMS, 0x51-0x57 - USB lock and unlock results

ssid

WiFi SSID

mac

WiFi MAC address

device_wifi_mac

WiFi MAC address of the device

wifi_mac_#

WiFi access point MAC address, # - access point number

wifi_rssi_#

WiFi access point RSSI, # - access point number

dBm

Wialon: una plataforma para todas sus necesidades

DecoyX 100

Otros dispositivos del fabricante

Haga crecer su negocio con nosotros

Conviértase en socio de Wialon

Busque a un proveedor local de Wialon