DecoyX 100

MCU model

MCU firmware version

Modem version

Modem app version

Hardware version

Data and GNSS status (Bits 1-8)

1. Bit8=0, realtime data; Bit8=1, history data

2. Bit7=0, LBS data; Bit7=1, GNSS data

3. Bit6=0, GNSS is in working mode. Bit6=1,GNSS is in sleeping mode

4. Bit5-Bit1, locked satellite count

Alarm code

Acceleration Value

Acceleration Value

Acceleration Value

Build in Battery Voltage (%)

Device Internal Temperature (℃)

Front Light Sensor Voltage

Solar Panel Voltage

Odometer (Meter)

Status (Bits 1-16)

1. Bit16= 1, USB cable connected(with power), Bit16 =0, USB cable disconnected(without power)

2. Bit15~Bit12 show 4 manager phone number set or not. (1=set, 0=not)

4. Bit 11~Bit5, Network signal strength. Range: 0~100

5. Bit4=1, solar panel is charging the battery, Bit4=0, solar panel doesn't charge the battery

6. Bit3=1, ignition on (moving), Bit3=0, ignition off (standstill)

7. Bit2=1 (Xtra Yes), Bit2=0 (Xtra No)

8. Bit1=0, normal timer reporting (TLP1-LF, TLP1-SF & TLP1-P), Bit1=1, smartpower timer reporting (TLP1-LF, TLP1-SF & TLP1-P)

Igniton ON Upload Interval(Second)

Ignition OFF or Accdet=0 Upload Interval (Second)

Angle Upload Interval (Degree)

Distance Upload Interval (Meter)

Heartbeat (Minute)

Current Setting Status Informaiton(1) (Bits 1-8)

1. Bit8: lock SIM card setting status, Bit8=1, locked, Bit8=0, unlocked

2. Bit7: lock device setting status, Bit7=1, locked, Bit7=0, unlocked

3. Bit6: AGPS Ephemeris data download setting status, Bit6=1, enable download, Bit6=0, disable download

4. Bit5:G-sensor setting status, Bit5=1 enable, Bit5=0, disable

5. Bit4: front sensor setting status, Bit4=1, enable, Bit4=0, disable

7. Bit2: open case alarm setting status,Bit2=1, enable, Bit2=0, disable

8.Bit1: device internal temperature reading and uploading setting status, Bit1=1, enable, Bit1=0, disable

Network Operators Name

Band Name

SIM Card IMSI

Mobile Network Code

Mobile Country Code

Cell Tower ID

Network signal strength. Range: 0~100

Internal Battery Voltage

Charging status (Bits 1-16)

Bit16=1, non-rechargeable battery; Bit16=0, rechargeable battery

Bits 1-15: when Bit16=0, how long the tracker is not charging; when Bit16=1, count of position and alarm messages sent at low battery voltage

Lock status code

0x00 - locked, 0x01 - rope cut

0x11-0x17 - NFC, 0x21-0x27 - network, 0x31-0x37 - BLE app, 0x41-0x47 - SMS, 0x51-0x57 - USB lock and unlock results

WiFi SSID

WiFi MAC address

WiFi MAC address of the device

WiFi access point MAC address, # - access point number

WiFi access point RSSI, # - access point number