PioneerX 101

Software version of the hardware

Firmware version of the hardware

Platform version of the hardware

Hardware version

Ignition ON Upload Interval

Ignition OFF Upload Interval

Angle Upload Interval

Distance upload interval

Bitwise variable, in which each bit means following:

1. Bit7=0, realtime data; Bit7=1, history data
2. Bit6=0, LBS data; Bit6=1, GNSS data
3. Bit5=0, GNSS is in working mode. Bit5=1, GNSS is in sleeping mode
4. Bit4~Bit0, locked satellite count

Over speed alarm setting

Bitwise variable in which each bit means following:

1. Bit7~Bit4, total 16 different gsensor sensitivity for move.
2. Bit3~Bit0, show 4 managers status (set or not)
3. Value=1, manger is set; Value=0, manager is null

Sending interval of heartbeat package

Relay status, which is bitwise variable

• Bit7 (command type received):
  • 0: device received the engine recover command
  • 1: device received the engine cut command

• Bit6 (engine cut execution status):
  • 0: engine cut failed because gps not fix or speed more than 20 km\h
  • 1: engine cut ok
• Bit 5 & Bit4 (rly mode):
  • 00: rlymode = 0
  • 10: rlymode = 1
  • 01: rlymode = 2
  • 11: rlymode = 3~255
• Bit3~Bit 0 (buld in alarm SMS language):
  • 0: Chinese
  • 1: English
  • 2: French
  • 3: Spanish
  • 4: German
  • 5: Portuguese
  • 6: Arabic
  • 7: Indonesian
  • 8: Russain
  • 9: Turkish
    

Bitwise variable, each byte means following:

1.Bit15~Bit0. The range is 0~65535
2. Value(Bit15~Bit0)=0, the drag alarm is disabled
3. Once the alarm is set and enabled, when device detected the ignition status changed from ON to OFF, the alarm will automatically become effective.