Topflytech SolarGuardX 100

MCU model

Version Information

(Modem APP)

Hardware Version

Bits 1-8

1. Bit8=0, realtime data; Bit8=1, history data

2. Bit7=0, LBS data; Bit7=1, GNSS data

3. Bit6=0, GNSS is in working mode. Bit6=1,GNSS is in sleeping mode

4. Bit5~Bit1, locked satellite count

Alarm Code

Acceleration Value

Acceleration Value

Acceleration Value

Build in Battery Voltage

Device Internal Temperature

Front Light Sensor Voltage

Internal Battery Voltage

Solar Panel Voltage

Odometer

Status Bits 1-16

1. Bit16= 1, USB cable connected(with power) Bit16 =0, USB cable disconnected(without power)

2. Bit15~Bit12 show 4 manager phone number set or not. (1=set, 0=not)

4. Bit 11~Bit5, Network signal strength. Range: 0~100

5. Bit4=1, solar panel is charging the battery Bit4=0, solar panel doesn't charge the battery

6. Bit3=1, ignition on (moving) Bit3=0, ignition off (standstill)

7. Bit2=1 (Xtra Yes) Bit2=0 (Xtra No)

8. Bit1=0, normal timer reporting (TLP1-LF, TLP1-SF & TLP1-P) Bit1=1, smartpower timer reporting (TLP1-LF, TLP1-SF & TLP1-P)

Network Signal Strength

Igniton ON Upload Interval(Second)

Ignition OFF or Accdet=0 UploadInterval (Second)

Angle Upload Interval

Distance Upload Interval

Heartbeat

Current Setting Status Informaiton(1) Bits 1-8

1. Bit8: lock SIM card setting status Bit8=1, locked Bit8=0, unlocked

2. Bit7: lock device setting status Bit7=1, locked Bit7=0, unlocked

3. Bit6: AGPS Ephemeris data download setting status Bit6=1, enable download Bit6=0, disable download

4. Bit5:G-sensor setting status Bit5=1 enable Bit5=0, disable

5. Bit4: front sensor setting status Bit4=1, enable Bit4=0, disable

6. Bit3: Device remove alarm setting status Bit3=1 enable Bit3=0, disable

7. Bit2: open case alarm setting status Bit2=1, enable Bit2=0, disable

8.Bit1: device internal temperature reading and uploading setting status Bit1=1, enable Bit1=0, disable

Network Operators Name

Access Technology Name

Band Name

SIM Card IMSI

ICCID

ACC Status

1. 0x00 means ACC OFF

2. 0x01 means ACC ON

Tire Presure Sensor Battery Voltage

Tire Pressure

Tire Air Temperature

Tire Sensor ID

Tire Pressure Data Status

BLE Tag Battery Voltage

BLE SOS Data Type

1. *=0, SOS alarm

2. *=1, Low battery alarm (lower than 2.4V)

BLE Data and GNSS Status Bits 1-8

1. Bit8=0, realtime data; Bit8=1, history data

2. Bit7=0, LBS data; Bit7=1, GNSS data;

3. Bit6=0, GNSS is in working mode. Bit6=1, GNSS is in sleeping mode

4. Bit5~Bit1, locked satellite count

BLE Driver Identification Data Type

BLE Temperature and Humidity Sensor ID

Sensor Battery voltage

Sensor Battery percentage

Temperature

Humidity

RSSI

Door Status

Relay Status

Humidity

Light Lux

Accel-X

Accel-Y

Accel-Z

Status Bits 1-8

Bit1 = 1, Door Opened

Bit2 = 1, Panic

Bit3 = 1, Impact

Lock Status

Error: device lock or unlock mechanical failure;

Cleared: error status is cleared;

Failed: doesn't meet lock or unlock status;

Time out - after unlock done, if more than 60 seconds doesn't plug out rope, device will automatically lock;

0x00，Lock, lock status；

0x01，Rope cut；

0x03，Lock error, unlock status；

0x04，NFC wakes up device to connect network;

0x05，Unlock error, lock status;

0x06，Unlock error cleared,unlock status;

0x07，Lock error cleared,lock status;

0x08，Lock error cleared,unlock status;

0x11，NFC unlock successfully, unlock status;

0x12，NFC unlock successfully and plug out rope time out, lock status;

0x13，NFC unlock failed, out of built-in Geofence,lock status;

0x14，NFC unlock error, lock status;

0x15，NFC unlock successfully, wait for time out, unlock status;

0x16，Rope cut, NFC unlock error, rope cut and NFC unlock error;

0x21，Network unlock successfully, unlock status;

0x22，Network unlock successfully and plug out rope time out, lock status;

0x23，Network unlock failed, out of built-in Geofence,lock status;

0x24，Network unlock error, lock status;

0x25，Network unlock successfully, wait for time out, unlock status;

0x26，Rope cut, network unlock error, rope cut and network unlock error;;

0x31，BLE unlock successfully, unlock status;

0x32，BLE unlock successfully and plug out rope time out, lock status;

0x33，BLE unlock failed, out of built-in Geofence,lock status;

0x34，BLE unlock error, lock status;

0x35，BLE unlock successfully, wait for time out, unlock status;

0x36，Rope cut, BLE unlock error, rope cut and BLE unlock error;

0x41，SMS unlock successfully, unlock status;

0x42，SMS unlock successfully and plug out rope time out, lock status;

0x43，SMS unlock failed, out of built-in Geofence,lock status;

0x44，SMS unlock error, lock status;

0x45，SMS unlock successfully, wait for time out, unlock status;

0x46，Rope cut, SMS unlock error, rope cut and SMS unlock error；;

0x51，USB unlock successfully unlock status;

0x52，USB unlock successfullyl and plug out rope time out, lock status;

0x53，USB unlock failed, out of built-in Geofence,lock status;

0x54，USB unlock error, lock status;

0x55，USB unlock successfully, wait for time out, unlock status;

0x56，Rope cut, USB unlock error, rope cut and USB unlock error;

NFC card (Hex format )ID or BLE APP unlock's smart phone's BLE MAC (Hex format) or SMS unlock's sender SIM card number(BCD (Binary-Coded Decimal‎)format)