Localizador GPS Linkedcore | Integrado con Wialon

Soportado en Wialon:

Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de Linkedcore en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	Linkedcore
ID único:	custom

Indique los siguientes parámetros en el programa de configuración o en la configuración Linkedcore para utilizarlos en Wialon Hosting :

Puerto del servidor:

22600

En el centro de servicio Wialon se utilizan 355 unidades Linkedcore — es 0.01% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
uart_msg_data	UART message data
alarm_flag	0,2,3,5,6,9-14,17-27,29,30: Reserved the default as 0 Bit 1: Overspeed alarm Bit 4: GNSS fault Bit 7: Device main power under voltage Bit 8: Device main power off Bit 15: Remove alarm Bit 16: Vibration alarm Bit 28: Illegal displacement of the vehicle Bit 31: Reserved
state_flag	4-30: Reserved default is 0 Bit 0: 0-ACC off 1-ACC on Bit 1: 0-GNSS position unfix 1-GNSS position fix Bit 2: 0-north latitude 1-south latitude Bit 3: 0-east longitude 1-west longitude Bit 10: 0-fuel connect 1-fuel disconnect Bit 30: 0-normal data 1-TOW data Bit 31: 0-real time data 1-buffer data
odometer	Odometer
gsm	Mobile Network Signal Strength
pwr_ext	External supply voltage in mV	mV
fw_ver	Firmware version
bt_mac_#	Bluetooth MAC, # - number of the device
bt_rssi_#	Bluetooth RSSI, # - number of the device
bt_name_#	Bluetooth name, # - number of the device
bt_volt_#	Bluetooth voltage, # - number of the device
bt_temp_#	Bluetooth temperature, # - number of the device
bt_humidity_#	Bluetooth humidity, # - number of the device
bt_accel_X_#	Bluetooth accelerometer sensor (X,Y,Z), # - number of the device
wifi_mac_#	WIFI MAC, # - number of the WIFI
wifi_rssi_#	WIFI RSSI, # - number of the WIFI
gpio_ch_#	GPIO channel, # - GPIO number
gpio_st_#	GPIO status, # - GPIO number
light_#	Sensors information: light
temp	Sensors information: temperature
humidity	Sensors information: humidity
accel_X	Sensors information: accelerometer
pwr_int	Battery voltage(mV)	mV
charge_st	Charge status(optional): 1 byte 0: invalid 1: uncharged 2: charging 3: full charging 4: abnormal
work_mode	Work mode:1 byte 0: Periodic mode 1: Trigger mode 2: Tracking mode 3: Clock mode 4: Periodic mode+Trigger mode 5: Periodic mode+Tracking mode 6: Clock mode+Trigger mode 7: Tracking mode+Trigger mode 8: Periodic mode+Trigger mode+Tracking mode
imei	IMEI
iccid	ICCID
device_type	Device type
gnss_age	GNSS position age
acc_on_dur	Duration of Acc on
hdop	HDOP
di1_cnt	DI1 counter
bt_dev_fw_ver_#	Bluetooth device firmware version, # - number of the device
air_pressure	Sensor information: air pressure

Nombre del parámetro

Descripción

Unidades de medida

uart_msg_data

UART message data

alarm_flag

0,2,3,5,6,9-14,17-27,29,30: Reserved the default as 0

Bit 1: Overspeed alarm

Bit 4: GNSS fault

Bit 7: Device main power under voltage

Bit 8: Device main power off

Bit 15: Remove alarm

Bit 16: Vibration alarm

Bit 28: Illegal displacement of the vehicle

Bit 31: Reserved

state_flag

4-30: Reserved default is 0

Bit 0: 0-ACC off 1-ACC on

Bit 1: 0-GNSS position unfix 1-GNSS position fix

Bit 2: 0-north latitude 1-south latitude

Bit 3: 0-east longitude 1-west longitude

Bit 10: 0-fuel connect 1-fuel disconnect

Bit 30: 0-normal data 1-TOW data

Bit 31: 0-real time data 1-buffer data

odometer

Odometer

gsm

Mobile Network Signal Strength

pwr_ext

External supply voltage in mV

fw_ver

Firmware version

bt_mac_#

Bluetooth MAC, # - number of the device

bt_rssi_#

Bluetooth RSSI, # - number of the device

bt_name_#

Bluetooth name, # - number of the device

bt_volt_#

Bluetooth voltage, # - number of the device

bt_temp_#

Bluetooth temperature, # - number of the device

bt_humidity_#

Bluetooth humidity, # - number of the device

bt_accel_X_#

Bluetooth accelerometer sensor (X,Y,Z), # - number of the device

wifi_mac_#

WIFI MAC, # - number of the WIFI

wifi_rssi_#

WIFI RSSI, # - number of the WIFI

gpio_ch_#

GPIO channel, # - GPIO number

gpio_st_#

GPIO status, # - GPIO number

light_#

Sensors information: light

temp

Sensors information: temperature

humidity

Sensors information: humidity

accel_X

Sensors information: accelerometer

pwr_int

Battery voltage(mV)

charge_st

Charge status(optional): 1 byte

0: invalid

1: uncharged

2: charging

3: full charging

4: abnormal

work_mode

Work mode:1 byte

0: Periodic mode

1: Trigger mode

2: Tracking mode

3: Clock mode

4: Periodic mode+Trigger mode

5: Periodic mode+Tracking mode

6: Clock mode+Trigger mode

7: Tracking mode+Trigger mode

8: Periodic mode+Trigger mode+Tracking mode

imei

IMEI

iccid

ICCID

device_type

Device type

gnss_age

GNSS position age

acc_on_dur

Duration of Acc on

hdop

HDOP

di1_cnt

DI1 counter

bt_dev_fw_ver_#

Bluetooth device firmware version, # - number of the device

air_pressure

Sensor information: air pressure

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Products

Soluciones de nicho para satisfacer las tareas específicas

Linkedcore

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Hacerse socio

Solicite Wialon en su región

Por favor, llene la solicitud para iniciar el trabajo con Wialon