Suntech ST600-UP

Suntech ST600-UP
Discontinuados

Cantidad de unidades

0
En línea
1
Total
Características Suntech ST600-UP:
  • 3G
  • Caja negra
Soportado en Wialon:
  • Gestión remota vía GPRS
  • Comunicación vía TCP
  • Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de Suntech ST600-UP en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: Suntech ST600-UP
ID único: serial

Indique los siguientes parámetros en el programa de configuración o en la configuración Suntech ST600-UP para utilizarlos en Wialon Hosting :

Puerto del servidor: 21387

En el centro de servicio Wialon se utilizan 1 unidades Suntech ST600-UP — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
cell_id GSM cell tower ID used for cell-based location assistance
model Device model code reported by the terminal
alert_id Alert type identifier reported in ALT messages
msg_type Message type: 1 = live/real-time message, 0 = stored/buffered message
alert_mod Alert modifier/sub-code providing extra context for the alert_id
fix GPS fix status: indicates whether the device has a valid satellite fix
card_num_hex RFID card number in hexadecimal representation
iccid ICCID of the SIM card installed in the device
alert_data Additional alert payload data (numeric or text, depending on alert type)
rep_type Report type code (e.g. STT, ALT, UEX, TPR, etc.) identifying the kind of message sent by the device
mode Device operating mode (e.g. parking / driving / motion state)
ver Firmware version of the device
rx_lvl GSM signal reception level dBm
stt_rpt_type Sub-type of the STT (status) report, refining the event that triggered the report
lac GSM Location Area Code
card_num RFID card number read by the device
mcc GSM Mobile Country Code
ble_mac MAC address of a paired/detected Bluetooth Low Energy (BLE) device (UBL report)
mnc GSM Mobile Network Code
mask Bitmask indicating which optional fields are present in the report
rs232_data Raw transparent data received over the device's RS232 port (UEX report)
msg_num Sequential message number assigned by the device
card_type Type of RFID card presented to the reader (e.g. driver ID card)
tm_sns_2 Temperature reading from external wired temperature sensor #2 (TPR report) °C
tm_sns_1 Temperature reading from external wired temperature sensor #1 (TPR report) °C
tm_sns_4 Temperature reading from external wired temperature sensor #4 (TPR report) °C
tm_sns_3 Temperature reading from external wired temperature sensor #3 (TPR report) °C

Otros dispositivos del fabricante

Haga crecer su negocio con nosotros