| io_239 |
Ignition (0 – Ignition Off, 1 – Ignition On) |
|
| io_240 |
Movement (0 – Movement Off, 1 – Movement On) |
|
| io_80 |
Data Mode (0 – Home On Stop, 1 – Home On Moving, 2 – Roaming On Stop, 3 – Roaming On Moving, 4 – Unknown On Stop, 5 – Unknown On Moving) |
|
| io_21 |
GSM Signal (Value in range 1-5) |
|
| io_200 |
Sleep Mode (0 – No Sleep, 1 – GPS Sleep, 2 – Deep Sleep, 3 – Online Sleep, 4 – Ultra Sleep) |
|
| io_69 |
GNSS Status (0 – GNSS OFF, 1 – GNSS ON with fix, 2 – GNSS ON without fix, 3 – GNSS sleep) |
|
| io_181 |
GNSS PDOP (multiplier 0.1) |
Coefficient |
| io_182 |
GNSS HDOP (multiplier 0.1) |
Coefficient |
| io_66 |
External Voltage (multiplier 0.001) |
V |
| io_24 |
Speed (GNSS Speed) |
km/h |
| io_205 |
GSM Cell ID (GSM base station ID) |
|
| io_206 |
GSM Area Code (LAC) |
|
| io_67 |
Battery Voltage (multiplier 0.001, Voltage) |
V |
| io_68 |
Battery Current (multiplier 0.001, Current) |
A |
| io_241 |
Active GSM Operator (code) |
|
| io_199 |
Trip Odometer value |
m |
| io_16 |
Total Odometer value in meters |
|
| io_1 |
Digital Input 1 (Logic: 0/1) |
|
| io_9 |
Analog Input 1 (Voltage, multiplier 0.001) |
V |
| io_179 |
Digital Output 1 (Logic: 0/1) |
|
| io_12 |
Fuel Used GPS (multiplier 0.001) |
l |
| io_13 |
Fuel Rate GPS (multiplier 0.01, Average Fuel Use) |
l/100km |
| io_17 |
Axis X value |
mG |
| io_18 |
Axis Y value |
mG |
| io_19 |
Axis Z value |
mG |
| io_11 |
ICCID1 (SIM ICCID, MSB) |
|
| io_10 |
SD Status (0 – not present, 1 – present) |
|
| io_2 |
Digital Input 2 (Logic: 0/1) |
|
| io_3 |
Digital Input 3 (Logic: 0/1) |
|
| io_6 |
Analog Input 2 (Voltage, multiplier 0.001) |
V |
| io_180 |
Digital Output 2 (Logic 0/1) |
|
| io_72 |
Dallas Temperature 1 (degrees °C, multiplier 0.1, with special codes if sensor error) |
°C |
| io_73 |
Dallas Temperature 2 (degrees °C, multiplier 0.1, with special codes if sensor error) |
°C |
| io_74 |
Dallas Temperature 3 (degrees °C, multiplier 0.1, with special codes if sensor error) |
°C |
| io_75 |
Dallas Temperature 4 (degrees °C, multiplier 0.1, with special codes if sensor error) |
°C |
| io_76 |
Dallas Temperature ID 1 (Dallas sensor ID) |
|
| io_77 |
Dallas Temperature ID 2 (Dallas sensor ID) |
|
| io_79 |
Dallas Temperature ID 3 (Dallas sensor ID) |
|
| io_71 |
Dallas Temperature ID 4 (Dallas sensor ID) |
|
| io_78 |
iButton ID |
|
| io_207 |
RFID ID |
|
| io_201 |
LLS 1 Fuel Level |
kvants or ltr |
| io_202 |
LLS 1 Temperature (fuel temperature) |
°C |
| io_203 |
LLS 2 Fuel Level |
kvants or ltr |
| io_204 |
LLS 2 Temperature |
°C |
| io_210 |
LLS 3 Fuel Level |
kvants or ltr |
| io_211 |
LLS 3 Temperature |
°C |
| io_212 |
LLS 4 Fuel Level |
kvants or ltr |
| io_213 |
LLS 4 Temperature |
°C |
| io_214 |
LLS 5 Fuel Level |
kvants or ltr |
| io_215 |
LLS 5 Temperature |
°C |
| io_15 |
Eco Score (multiplier 0.01, average amount of events over some distance) |
|
| io_113 |
Battery Level (capacity level %) |
% |
| io_238 |
User ID (MAC address of NMEA receiver via Bluetooth) |
|
| io_237 |
Network Type (0 – 3G, 1 – GSM, 2 – 4G, 3 – LTE CAT M1, 4 – LTE CAT NB1, 99 – Unknown) |
|
| io_4 |
Pulse Counter Din1 (counts pulses, resets when records saved) |
|
| io_5 |
Pulse Counter Din2 (counts pulses, resets when records saved) |
|
| io_263 |
BT Status (0 – disabled, 1 – enabled not connected, 2 – connected BTv3 only, 3 – connected BLE only, 4 – connected BLE + BT) |
|
| io_264 |
Barcode ID |
|
| io_303 |
Instant Movement (Logic: 0/1, returns movement value) |
|
| io_327 |
UL202-02 Sensor Fuel level (multiplier 0.1) |
mm |
| io_483 |
UL202-02 Sensor Status (sensor status codes) |
|
| io_380 |
Digital Output 3 (Logic: 0/1) |
|
| io_381 |
Ground Sense (Logic: 0/1) |
|
| io_387 |
ISO6709 Coordinates (latitude, longitude and altitude in ±DDMMSS.SSSS±DDDMMSS.SSSS±AAA.AAA/ format) |
|
| io_636 |
UMTS/LTE Cell ID |
|
| io_403 |
Driver Name (from card, without delimiters) |
|
| io_404 |
Driver card license type |
|
| io_405 |
Driver Gender (0 – none, 1 – male, 2 – female) |
|
| io_406 |
Driver Card ID |
|
| io_407 |
Driver card expiration date |
|
| io_408 |
Driver Card place of issue |
|
| io_409 |
Driver Status Event (0 – Registered, 1 – Deregistered, 2 – Swapping) |
|
| io_329 |
AIN Speed |
|
| io_500 |
MSP500 vendor name |
|
| io_501 |
MSP500 vehicle number |
|
| io_502 |
MSP500 speed sensor status |
|
| io_637 |
Wake Reason (true if device was woken by RTC alarm) |
|
| io_10800 |
EYE Temperature 1 (multiplier 0.01) |
°C |
| io_10801 |
EYE Temperature 2 (multiplier 0.01) |
°C |
| io_10802 |
EYE Temperature 3 (multiplier 0.01) |
°C |
| io_10803 |
EYE Temperature 4 (multiplier 0.01) |
°C |
