Localizador GPS Tramigo T23 | Integrado con Wialon

Soportado en Wialon:

Sensores ADC
Sensores Digitales
Botón de alarma
Comunicación vía TCP

Para que el sistema de rastreo Wialon identifique los datos de Tramigo T23 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	Tramigo T23
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración Tramigo T23 para utilizarlos en Wialon Hosting :

Puerto del servidor:

20822

En el centro de servicio Wialon se utilizan 226 unidades Tramigo T23 — es 0.01% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
seq_num	Sequence of message
msg_id	Type of Message 0 - Basic. Contains basic location information and signal quality; 1 - TLD. Contains Tramigo Landmark information; 4 - Trip. Contains information of a completed trip; 20 - Additional information like temperature and device I/O Extended states; 22 - Zone. Contains name of a zone and state if inside/outside of zone; 40 - Analog and OneWire. Values from Analog Input and OneWire accessories of device.
report_trigger	Report trigger code
gsm	GSM signal quality	-dBm
gps_antenna	State of the GPS antenna. 0 = LNA off; 1 = Short circuit; 2 = Internal 3 = External
distance	Current odometer distance	m
pwr_int	Voltage of the internal battery	mV
battery_charging	Units: mV Status of the internal battery charger. 0 = Power disconnected; 1 = Charging; 2 = Battery full; 3 = Charging error
state_flags	Bit flags for the unit status. 0 - Charging. Bit0 is set if backup battery is being charged. 1 - Reserved 2 - Battery Low. Bit2 is set if backup battery is low. 3 - No Battery. Bit3 is set if no backup battery is installed in device; 4 - Bad Battery. Bit4 is set if bad backup battery is detected; 5 - Ignition On / Off. Bit5 is set if ignition is ON. Either I/O based or Shock Sensor; 6 - Reserved; 7 - Parked. Bit7 is set if device/vehicle is parked; 8 - Moving. Bit8 is set if device/vehicle is moving; 9 - Stopped. Bit9 is set if device/vehicle is stopped; 10 - Reserved.
mcc	Mobile Country Code of the current GSM operator
mnc	Mobile Network Code of the current GSM operator
lac	Location Area Code of the current serving GSM cell
cell_id	Cell ID of the current serving GSM cell
gsm_status	Status of the GSM network registration 0 = No Network; 1 = Home network; 2 = Searching; 3 = Registration denied; 5 = Roaming network
gsm_temp	Temperature of the GSM module	C
speed_max	Maximum speed since the previous report	km/h
speed_min	Minimum speed since the previous report	km/h
gps_signal	Units: km/h GPS signal quality 0-100	%
gsm_signal	GSM signal quality 0-100	%
tld_ref_id	IF of the closest TLD location used as reference to previously indicated full TLD information Zero if TLD location is not available
bearing_to_tld	Bearing from the current location to the reference TLD location Units: degrees, 0=north, 90=east, etc.
distance_to_tld	Distance from the current location to the reference TLD location	m
battery_level	Battery level 0-100.	%
odometer	The odometer of the current trip.	m
driver_id	OneWire device ID of currently attached Driver ID fob.
temp_#	Temp Sensor # temperature	C
analog	Voltage at the Analog Input of the device.	mV
city	Name of city.
district	Name of larger area, like town or district.
landmark	Name of landmark.
country_code	Country where the landmark resides, 2 characters.

Nombre del parámetro

Descripción

Unidades de medida

seq_num

Sequence of message

msg_id

Type of Message
0 - Basic. Contains basic location information and signal quality;
1 - TLD. Contains Tramigo Landmark information;
4 - Trip. Contains information of a completed trip;
20 - Additional information like temperature and device I/O Extended states;
22 - Zone. Contains name of a zone and state if inside/outside of zone;
40 - Analog and OneWire. Values from Analog Input and OneWire accessories of device.

report_trigger

Report trigger code

gsm

GSM signal quality

-dBm

gps_antenna

State of the GPS antenna.

0 = LNA off;
1 = Short circuit;
2 = Internal
3 = External

distance

Current odometer distance

pwr_int

Voltage of the internal battery

battery_charging

Units: mV Status of the internal battery charger.

0 = Power disconnected;
1 = Charging;
2 = Battery full;
3 = Charging error

state_flags

Bit flags for the unit status.

0 - Charging. Bit0 is set if backup battery is being charged.
1 - Reserved
2 - Battery Low. Bit2 is set if backup battery is low.
3 - No Battery. Bit3 is set if no backup battery is installed in device;
4 - Bad Battery. Bit4 is set if bad backup battery is detected;
5 - Ignition On / Off. Bit5 is set if ignition is ON. Either I/O based or Shock Sensor;
6 - Reserved;
7 - Parked. Bit7 is set if device/vehicle is parked;
8 - Moving. Bit8 is set if device/vehicle is moving;
9 - Stopped. Bit9 is set if device/vehicle is stopped;
10 - Reserved.

mcc

Mobile Country Code of the current GSM operator

mnc

Mobile Network Code of the current GSM operator

lac

Location Area Code of the current serving GSM cell

cell_id

Cell ID of the current serving GSM cell

gsm_status

Status of the GSM network registration

0 = No Network;
1 = Home network;
2 = Searching;
3 = Registration denied;
5 = Roaming network

gsm_temp

Temperature of the GSM module

speed_max

Maximum speed since the previous report

km/h

speed_min

Minimum speed since the previous report

km/h

gps_signal

Units: km/h GPS signal quality 0-100

gsm_signal

GSM signal quality 0-100

tld_ref_id

IF of the closest TLD location used as reference to previously indicated full TLD information Zero if TLD location is not available

bearing_to_tld

Bearing from the current location to the reference TLD location Units: degrees, 0=north, 90=east, etc.

distance_to_tld

Distance from the current location to the reference TLD location

battery_level

Battery level 0-100.

odometer

The odometer of the current trip.

driver_id

OneWire device ID of currently attached Driver ID fob.

temp_#

Temp Sensor # temperature

analog

Voltage at the Analog Input of the device.

city

Name of city.

district

Name of larger area, like town or district.

landmark

Name of landmark.

country_code

Country where the landmark resides, 2 characters.

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Products

Soluciones de nicho para satisfacer las tareas específicas

Tramigo T23

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Hacerse socio

Solicite Wialon en su región

Por favor, llene la solicitud para iniciar el trabajo con Wialon