Xexun TK103-2

In order to configure the object, you have to follow these steps by sending SMS commands to the tracker:

• "begin123456" - resets all controller's settings, password 123456 is set by default
• make a call to the controller, which should wait untill two beeps, break the call and send SMS with it's coordinates
• "apn123456 mts" - sets the required apn for gprs configuration
• "apnuser123456 mts" - sets the user for gprs configuration
• "apnpasswd123456 mts" - sets the password for gprs configuration. For new equipment versions user and password are set with one command "admin123456 mts mts"
• "GPRS123456" - we're setting GPRS mode
• "adminip123456 <IP> 20462" - sets the server's address for packages sending, <IP> replace for IP of monitoring system
• "t030s***n123456" - sets the interval of messages sending to 30 seconds. For new equipment versions this command can have the following format "fix030s***n123456"

You can also download an example of object configuration file for Xexun TK103-2 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.