Número de unidades
The following data should also be added to Xexun TK103-2 unit properties section of Wialon GPS tracking software :
| Device type: | Xexun TK103-2 |
| ID único: | imei |
Specify the following parameters in configuration software or configuration Xexun TK103-2 for use in Wialon Hosting :
| Porta do servidor: | 20462 |
356 units of Xexun TK103-2 device type are connected to Wialon Data Center. This represents 0.02% of all AVL Hardware connected.
Below chart represents the dynamic of connections in the last 30 days:
| Parameter name | Description | Units |
|---|---|---|
| ac_alarm | Acceleration alarm | |
| acc_alarm | Acceleration alarm | |
| battery | Battery charge level | % |
| door_alarm | Door alarm | |
| door | Door alarm | |
| event | Event that initiated the message | |
| fortify | Fortification alarm | |
| fuel_level | Fuel level | % |
| help_me | SOS button pressed | |
| ign | Ignition on/off | |
| ignition | Ignition on/off | |
| low_battery | Low battery alarm | |
| move_alarm | Movement alarm | |
| over_speed | Over speed alarm | |
| param_1 | Additional param 1 value | |
| param_2 | Additional param 2 value | |
| power_fail | External power failure | |
| pwr_int | Internal battery voltage | Volt |
| rfid | RFID | |
| shake | Shake alarm | |
| temp | Temperature | °C |
| trigger | Trigger alarm |
In order to configure the object, you have to follow these steps by sending SMS commands to the tracker:
You can also download an example of object configuration file for Xexun TK103-2 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.
