whereQube OBD

whereQube OBD
Производитель: Geometris
Обсуждение на форуме

Количество объектов

1332
Онлайн
5869
Всего
Поддержано в Wialon:
  • Связь через UDP

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от whereQube OBD в диалоге настроек объекта, укажите следующие данные :

Тип устройства: whereQube OBD
Уникальный ID: serial

Укажите следующие параметры в конфигурационной программе или в конфигурации whereQube OBD для использования его в Wialon Hosting :

Порт сервера: 21515

Всего в серверном центре Wialon используется 5869 объектов whereQube OBD — это составляет 8.23% от общего количества устройств в категории «OBD трекеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра Описание Единицы измерения
reason_text A textual reason why the event was generated
reason_code A numeric reason why the event was generated
ign 0 or 1 signifying the ignition state
duration Context based duration value(e.g Idling event has been reporting for 'reported duration') seconds
roll_time Total time equipment has been in motion seconds
true_odometer_km Actual vehicle odometer, else empty kilometers
true_odometer_miles Actual vehicle odometer, else empty miles
odometer_km Odometer in Kilometers kilometers
odometer_miles Odometer in Miles miles
phone_number Phone number of modem if available
accelpoints Instantaneous X/Y/Z accelerometer data
location_trail Trails provide a high-resolution travel path for vehicles, allowing for bread crumb trails of vehicle location & speed
iostates Bitfield to reflect actual state of IO. Bitwise-AND the data to determine individual state. 0x100 for Ignition wire, 0x200 for panic button input
ble_client_state Bluetooth connected state. 1=connected, 0=disconnected, empty = unknown
sats_in_view Number of satellites in view
ign_duration Cumulative seconds Ignition was on seconds
pwr_ext Battery voltage measured in mv measured by device volts
pwr_int Battery voltage measured in mv of the internal battery in Device volts
total_idle_dur Total Duration of time that the vehicle has been in idling state seconds
fence_id Shows active fence ID
harness_detection Harness detection status
odometer_change_km Change in odometer since last packet construction (in km). ECU if gps_odometer is overwrite by ECU odometer kilometers
odometer_change_miles Change in odometer since last packet construction (in miles). ECU if gps_odometer is overwrite by ECU odometer miles
cell_information Cellular Information
format_checksum 16 bit CCITT Checksum of packet format string (Useful to switch server parser based on packet contents)
firmware_ver 16 bit CCITT Checksum of App Firmware version string:Supervisor FW Version:Bluetooth FW Version (Bluetooth FW Version only present on devices that support Bluetooth)
cell_rssi Current Cell RSSI value dBm
cluster_data Location Cluster Data
engine_rpm Instantaneous engine RPM RPM
engine_coolant_temp Instantaneous engine coolant temperature °C
engine_speed Instantaneous speed reported by ECU in MPH RPM
engine_odometer Odometer reported by ECU in miles kilometers
vin VIN number reported by ECU. Can also be set by using SETVIN command
fuel_level Fuel level reported by ECU (1-100%) %
dtc Active Diagnostic Trouble Codes reported by ECU
throttle_position Throttle Position reported by ECU %
obd_pwr_ext Battery Voltage reported by ECU volts
ambient_temperature Ambient Temperature reported by ECU °C
cumulative_fuel_economy Cumulative Fuel Economy calculated for vehicle, in hundredths of miles per gallon mpg
trip_fuel_economy Fuel Economy calculated for current trip, in hundredths of miles per gallon mpg
current_fuel_economy Instantaneous Fuel Economy calculated, in hundredths of miles per gallon mpg
ecu_all_dtc All Diagnostic Trouble Codes reported by ECU
dpfregen_inhibit 0=Not inhibited, 01=Inhibited
j1939_engine_hours In 1/100th hour increments, eg, 76168 is 761.68 Hours hours
j1939_total_fuel_used Total fuel used for petrol or diesel engines. Captured from ECU for J1939/J1708(Lifetime); calculated for OBD-II.(Tracker Tenure) liters
j1939_total_gas_used Total gas used for gaseous engines (e.g., natural gas) liters
j1939_idle_hours In 1/100th hour increments e.g 27155 = 271.55 Hours hours
total_pto_hours In 1/100th hour increments, eg, seconds / 36 hours
max_vehicle_speed_limit Speed limit set in ECU km/h
j1939_oil_temperature In hundredths of degrees Celsius °C
j1939_engine_oil_level Oil level reported by ECU. e.g 1000/10= 100% %
j1939_coolant_level Coolant level reported by ECU. e.g 1000/10= 100% %
j1939_diesel_exhaust_fluid_level DEF level reported by ECU e.g 712 = 71.2 % %
j1939_diesel_exhaust_fluid_temperature DEF temperature reported by ECU °C
dpf_soot_load Soot DPF Buildup reported by ECU (0-250%) with 100% triggering active regeneration, and 0%, 25%, 50%, and 75% representing varying soot levels before regeneration is needed %
dpf_time_since_last_active_regeneration Value can be between 0-421,108,1215 seconds hours
dpf_soot_load_regeneration_threshold 0-160.6375 % e.g 555300 = 55.53% %
dpf_status 000 = Regeneration not needed, 001 = Regeneration needed - lowest level, 010 = Regeneration needed - moderate level, 011 = Regeneration needed - highest level, 7= Not available
dpf_active_regeneration_status 00=not active,01=active,10=regeneration needed(Automatically initiated active regeneration imminent),11=not available
transmission_oil_level Oil level reported by ECU %
transmission_oil_temperature Oil temperature reported by ECU ( Range: -273 to 1735 ) e.g 6346 = 63.46 Celcius °C
transmission_current_gear Values from -125 to +125 represent gears: negative for reverse, positive for forward, zero for neutral, and 126 for park
seatbelt_switch State of switch used to determine if Seat Belt is buckled. (0) NOT Buckled. (1) OK - Seat Belt is buckled. (2) Error - Switch state cannot be determined. (3) & (255) Not Available
ecu_odometer_km Odometer reported by ECU in kilometers kilometers
ecu_speed_km Instantaneous speed reported by ECU in KPH km/h
j1939_cruise_control_state_time Total time cruise control is engaged in seconds. Reset after each use in packet seconds
j1939_cruise_control_state 1=Hold,2=Accelerate,3=Decelerate,4=Resume,5=Set,6=Override
dm1 Diagnostic Trouble Codes reported by ECU for J1939 Protocol
dm2 Diagnostic Trouble Codes reported by ECU for J1939 Protocol
ecu_idle_fuel_used Fuel used while idling for petrol or diesel engines. Captured from ECU for J1939/J1708; calculated for OBD-II.(Tracker Tenure) liters
ecu_trip_fuel_used Trip fuel used for petrol or diesel engines. Captured from ECU for J1939/J1708; calculated for OBD-II liters
j1939_trip_gas_used Trip gas used for gaseous engines (e.g., natural gas) liters
tpms_all_tires Add all tires information to the packet
tpms_fault_tires Add only faulty tires information to the packet
ecu_pto_state PTO Governor State. 0=off, 1 through 19 engaged. Can also be hardwired to generate PTO State
ecu_chargelvl Electric vehicle Charge level %
one_w_sensor_serial_num Serial number of One-wire temperature sensor (79 series only)
one_w_sensor_temp Tenth of a Degree Celsius (79 series only) °C
driver_id 1-wire DRIVER ID tag information or BLE Driver ID tag information. Multiple tags are separated by the space character
tool_tag Tool Tracking Tag information. Multiple tags are separated by the space character

Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Заполните заявку для начала работы с Wialon

Шаг 1
Шаг 2
Шаг 3
Имя*
Фамилия*
Компания*
Email*
Телефон