whereQube OBD

whereQube OBD
Manufacturer: Geometris
Forum Discussion

Number of units

Supported in Wialon:
  • Communication via UDP

The following data should also be added to whereQube OBD unit properties section of Wialon GPS tracking software :

Device type: whereQube OBD
Unique ID: serial

Specify the following parameters in configuration software or configuration whereQube OBD for use in Wialon Hosting :

Server port: 21515

6228 units of whereQube OBD device type are connected to Wialon Data Center. This represents 7.73% of all OBD trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units

protocol format.
This string acts as an identifier for the message format. If you put additional variables into the message, or different variables, this value will change.

direction_alpha heading N,S,E,W
duration Context dependent duration value. Depends on the message reason that identifies the event. such as IDLING, and SPEEDING. Describes in minutes how long.
idle_duration Total idle engine hours reported by the ECU hours
location_age_min Minutes since last GPS fix minutes

Unit system name.
English or Metric

message_reason Identifies which event caused the device to send a packet, as described by the events in the Geometris documentation.
odometer Odometer value as computed by displacement in space
obd_coolant Coolant temperature
obd_enginerpm Engine RPM
obd_fuel Fuel tank percent full, 0 to 100 %
obd_instantmpg Instant fuel consumption mpg
obdmpg Average fuel consumption in miles per gallon since installation of the device mpg
obd_tripmpg Average fuel consumption during the trip since ignition on. mpg
obd_odometer Odometer as reported by the engine computer
obd_speed Speed by engine computer mpg
obd_throttle Throttle position %
obdvin VIN

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*